Home / Products / 1011HO2-1920HO – ADA Vandal-Resistant Motion-Activated Dual Fountain and Bottle Filler

1011HO2-1920HO

ADA Vandal-Resistant Motion-Activated Dual Fountain and Bottle Filler

Model 1011HO2-1920HO, Hi-Lo ADA, wall mounted, touchless vandal-resistant dual drinking fountain and bottle filler with back panels. FOR INDOOR USE ONLY The bottle filler requires a mounting plate; either the 6700 in-wall or the 6700R on-wall support plate. (See options below)
Contact Us for a Custom Solution

Required Parts Sold Separately

Fountain with Bottle Filler Spec Sheet

Operational / Maintenance Manual

MasterSpec® Files

Limited Warranty

Specifications

Model 1011HO2-1920HO Hi-Lo ADA wall mounted motion-activated vandal-resistant drinking fountain and bottle filler shall include dual 18 gauge Type 304 Stainless Steel satin finish basins with integral swirl design, 14 gauge Type 304 Stainless Steel wall brackets and bottle filler bracket, 100% lead-free waterways, sensor operated stainless steel solenoid valves with 30-second obstruction time-out controlled by a transformer, 1 gpm (3.78 L) bottle filler laminar flow, polished chrome-plated brass vandal-resistant bubbler heads with integral laminar anti-squirt flow, chrome-plated brass vandal-resistant waste strainers, vandal-resistant bottom plates, stainless steel satin finish back panel, high and low fountain mounting levels, and 1-1/4" O.D. (3.2 cm) waste pipes. (P-trap and stop require rear access) The botte filler requires a mounting plate; either the Haws model 6700 in-wall or the 6700R on-wall support plate.

Pricing Information

$3995 USD
Contact Haws Specials

ADA Vandal-Resistant Motion-Activated Dual Fountain and Bottle Filler

The Haws 1011HO2-1920HO ADA Hi-Lo stainless-steel vandal-resistant drinking fountain and bottle filler incorporates sensor operated stainless steel solenoid valves controlled by a transformer for hands-free operation. A pressure regulator is used to adjust the bubbler flow according to incoming water pressures.

Touchless operation for safety and peace of mind
Vandal resistant components include bubblers, bowls, drains and bottom plates
30-second obstruction time-out to reduce tampering of sensor
18 gauge Type 304 Stainless Steel bowl assemblies mounted on 14 gauge Type 304 Stainless Steel wall brackets
100% lead-free waterways
1 gpm (3.78 L) bottle filler laminar flow
Polished chrome-plated brass bubbler heads with integral laminar anti-squirt flow eliminate water splash
Beautiful satin finish resists stains and corrosion
"Hi-Lo" design allows for twice the users as regular fountains and suits the needs for various user heights
The bottle filler requires a mounting plate; either the 6700 in-wall or the 6700R on-wall support plate. (See options below)

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) "NSF/ANSI/CAN 61: Q ≤ 1".

Prop 65 Warning. For California Residents Warning: This product contains a chemical known to the State of California to cause cancer and/or birth defects or other reproductive harm. Please click here for more information.