The Haws 8606SS walk-through booth enclosed combination shower and eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly. This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eye washes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain. AXION MSR also offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim of normal showerheads, making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets.

• Type 304 Stainless Steel dual-entry walk-through booth and piping construction with a satin finish
• Integral center location drain strainer
• Install flexibility with top or bottom inlet supply
• Large universal labeling and signage for easy locating
• Eyewash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
• A great addition to unsafe environments where the eyes, face, and body may be exposed to corrosive materials
• Requires minimal maintenance and is equipped with test card to record weekly testing
• Reducing installation time, the entire unit is pre-built and fully pressure tested

Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment.

The Haws 8605SS, an enclosed emergency shower and eye wash featuring the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eye washes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain. AXION MSR also offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim of normal showerheads, making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets.

• Type 304 Stainless Steel booth and piping construction with a satin finish
• Integral center location drain strainer
• Install flexibility with top or bottom inlet supply
• Large universal labeling and signage for easy locating
• Eyewash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
• A great addition to unsafe environments where the eyes, face, and body may be exposed to corrosive materials
• Requires minimal maintenance and is equipped with test card to record weekly testing
• Reducing installation time, the enclosed emergency shower and eye wash is pre-built and fully pressure tested

Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment.

Learn More

The Haws 1119FRP barrier-free Hi-Lo vandal-resistant drinking fountain and bottle filler incorporates fully engineered pneumatic operated freeze-resistant valve assemblies. Wall mounted design allows the 1119FR to be placed securely in multiple locations without taking up excess space. Equipped with vandal resistant components, this fountain is not easily disrupted, quickly discouraging vandals.

• 18 gauge Type 304 Stainless Steel design provides a well constructed sturdy fountain
• Vandal resistant components include the bubblers, buttons, drains and bottom plates
• Valves are installed in an area where the temperature remains at a minimum of 50° F (10° C) so the fountain remains fully functional in freezing conditions
• Drip tray for bottle placement during filling
• 1 gpm (3.78 L) laminar flow bottle filler
• Beautiful satin finish resists stains and corrosion
• Soft rounded corners prevent mishaps and other accidents that may occur once the fountain is installed
• “Hi-Lo” design allows for twice the users as regular fountains and suits the needs for various user heights
• One-piece stamped bowls make for an aesthetically pleasing and durable design
• The bottle filler requires a mounting plate; either the 6700 in-wall or the 6700R on-wall support plate. (See options below)

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains and electric water coolers to be lead-free by all known definitions including NSF/ANSI Standard 61, Section 9, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.

The Haws 1119FRB barrier-free Hi-Lo vandal-resistant drinking fountain uses fully engineered pneumatic operated freeze-resistant valve assemblies. Wall mounted design allows it to be placed securely in multiple locations without taking up excess space. Equipped with vandal resistant components, this fountain is not easily disrupted, quickly discouraging vandals.

• 18 gauge Type 304 Stainless Steel design provides a well constructed sturdy fountain
• Vandal resistant components include the bubblers, buttons, drains and bottom plates
• Valves are installed in an area where the temperature remains at a minimum of 50° F (10° C) so the fountain remains fully functional in freezing conditions
• Beautiful satin finish resists stains and corrosion
• Soft rounded corners prevent mishaps and other accidents that may occur once the fountain is installed
• “Hi-Lo” design allows for twice the users as regular fountains and suits the needs for various user heights
• One-piece stamped bowls make for an aesthetically pleasing and durable design

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains and electric water coolers to be lead-free by all known definitions including NSF/ANSI Standard 61, Section 9, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.

The Haws 1109FRP barrier-free vandal-resistant drinking fountain and bottle filler includes fully engineered pneumatic operated freeze-resistant valve assemblies for continual use during winter months. Wall mounted design allows the unit to be placed securely in multiple locations without taking up excess space. Equipped with vandal resistant components, this fountain is not easily disrupted, quickly discouraging vandals.

• 18 gauge Type 304 Stainless Steel design provides a well constructed sturdy fountain
• Drip tray for bottle placement during filling
• Vandal resistant components include the bubbler, buttons, drain and bottom plates
• Valves are installed in an area where the temperature remains at a minimum of 50° F (10° C), this unit will assist the fountain in remaining fully functional in freezing conditions
• Flow is easily adjustable with supplied regulator valves
• Beautiful satin finish resists stains and corrosion
• Soft rounded corners prevent mishaps and other accidents that may occur once the fountain is installed
• One-piece stamped bowl makes for an aesthetically pleasing and durable design
• The bottle filler requires a mounting plate; either the 6700 in-wall or the 6700R on-wall support plate. (See options below)

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.

The Haws 1109FRB barrier-free vandal-resistant drinking fountain includes a fully engineered pneumatic operated freeze-resistant valve assembly for continual use during winter months. Wall mounted design allows the unit to be placed securely in multiple locations without taking up excess space. Equipped with vandal resistant components, this fountain is not easily disrupted, quickly discouraging vandals.

• 18 gauge Type 304 Stainless Steel design provides a well constructed sturdy fountain
• Vandal resistant components include the bubbler, button, drain and bottom plate
• Valve is installed in an area where the temperature remains at a minimum of 50° F (10° C), this unit will assist the fountain in remaining fully functional in freezing conditions
• Flow is easily adjustable with supplied regulator valve
• Beautiful satin finish resists stains and corrosion
• Soft rounded corners prevent mishaps and other accidents that may occur once the fountain is installed
• One-piece stamped bowl makes for an aesthetically pleasing and durable design

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.

The Haws BTL1311 is an add-on bottle stand for the 1311/1501 series drinking fountains with the 1920 bottle filler option. Once installed, the user can place their bottle on the stand allowing the bottle to be filled with one hand (either by using the push button, or the motion-activated operation). The stand is made of 304 stainless-steel and is easily installed (see video under Resources).

The Haws BTL1107 is an add-on bottle stand for the 1107/1117 series drinking fountains with the 1920 bottle filler installed option. Once installed, the user can place their bottle on the stand allowing the bottle to be filled with one hand (either by using the push button, or the motion-activated operation). The stand is made of 304 stainless-steel with a satin finish, and is easily installed (see video under Resources).

The Haws BTL1001 is an add-on bottle stand for the 1001/1011 series drinking fountains with the 1920 bottle filler option. Once installed, the user can place their bottle on the stand allowing the bottle to be filled with one hand (either by using the push button, or the motion-activated operation). The stand is made of 304 stainless-steel with a satin finish, and is easily installed (see video under Resources).

The Haws 1117LHO2-1920HO adjustable barrier-free vandal-resistant Hi-Lo touchless drinking fountain and bottle filler incorporates sensor operated stainless steel solenoid valves controlled by a transformer for hands-free operation. A pressure regulator is used to adjust the bubbler flow according to incoming water pressures.

• Touchless operation for safety and peace of mind
• Vandal resistant components include the bubblers, drains and bottom plates
• 30-second obstruction time-out to reduce tampering of sensor
• 100% lead free waterways
• 1 gpm (3.78 L) bottle filler laminar flow
• Beautiful satin finish resists stains and corrosion
• 14 gauge Type 304 Stainless Steel design provides a well-constructed sturdy fountain
• “Hi-Lo” adjustable design allows for twice the users as regular fountains and suits the needs for various user heights
• Soft rounded corners prevent from mishaps and other accidents that may occur once the fountain is installed
• One-piece stamped bowls with low-profile basin make for an aesthetically pleasing and durable design
• The bottle filler requires a mounting plate; either the 6700 in-wall or the 6700R on-wall support plate. (See options below)

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.

The Haws 1117LHO-1920HO adjustable vandal-resistant barrier-free Hi-Lo drinking fountain and bottle filler incorporates a sensor operated stainless steel solenoid valves controlled by a transformer for hands-free operation on the bottle filler and on one side of the fountain, and offers the ‘only’ all stainless-steel valve body that is machined out of solid bar stock on the other. It is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer, and has front access to the water stream height adjustment for easy maintenance without having to remove the valve.

• Touchless operation on one side for safety and peace of mind
• Vandal resistant components include the bubblers, button, drains and bottom plates
• 30-second obstruction time-out to reduce tampering of sensor
• 100% lead free waterways
• Easy maintenance with front access to valve adjustment and cartridge replacement
• 1 gpm (3.78 L) bottle filler laminar flow
• Beautiful satin finish resists stains and corrosion
• 14 gauge Type 304 Stainless Steel design provides a well-constructed sturdy fountain
• “Hi-Lo” adjustable design allows for twice the users as regular fountains and suits the needs for various user heights
• Soft rounded corners prevent from mishaps and other accidents that may occur once the fountain is installed
• One-piece stamped bowls with low-profile basin make for an aesthetically pleasing and durable design
• The bottle filler requires a mounting plate; either the 6700 in-wall or the 6700R on-wall support plate. (See options below)

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and NSF/ANSI/CAN 61: Q ≤ 1.

Model 1922HO vandal-resistant touchless satin stainless steel bottle filler with drain incorporates a sensor operated stainless steel solenoid valve controlled by a transformer for hands-free operation. A pressure regulator is used to adjust the bubbler flow according to incoming water pressures. The drip tray captures all unused water and is sent down the drain.

• Satin stainless steel finish
• Vandal resistant components include the sensor casing and bottom plate
• Touchless operation for safety and peace of mind
• 30-second obstruction time-out to reduce tampering of sensor
• Available steel wall mounting plate recommended
• 1 gpm (3.78 L) Laminar flow
• If back panels are not required, order models 1920 and 6468
• This product requires a mounting plate; either the 6700 in-wall or the 6700R on-wall support plate. (See options below)

Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.

Trouble viewing this website?

Without an up-to-date browser, you may have trouble with some of our features.

Update Now

Edge

Firefox

Chrome