Home / Products / 1117.8 – ADA Low Profile Dual Chilled Vandal-Resistant Fountain

ADA Low Profile Dual Chilled Vandal-Resistant Fountain

Model 1117.8, ADA vandal-resistant, wall mounted 14 gauge dual fountain satin finish stainless steel electric water cooler with back panel and 100% lead free waterways. FOR INDOOR USE ONLY

Required Components Ordered Separately

Spec Sheet & Installation Drawing

Operational / Maintenance Manual

Installation Drawing

Parts Breakdown Drawing

AutoCAD Installation Drawing

MasterSpec® Files

Limited Warranty

Specifications

Model 1117.8 low profile wall-mounted ADA vandal-resistant drinking fountain shall include dual 14 gauge Type 304 stainless steel satin-finish basins with integral 1/4" (.6 cm) thick stainless steel mounting plates, 16 gauge galvanized steel in-wall mounting frame with welded-in heavy-duty 10 gauge mounting plate, vandal-resistant push-button operated stainless steel valves with front-accessible cartridge, in-line strainer and flow adjustment provide 100% lead free waterways, polished chrome-plated brass vandal-resistant bubbler heads, polished chrome-plated brass vandal-resistant waste strainers, vandal-resistant bottom plates, stainless steel satin finish back panel and louvered intrusion-proof grille, and 1-1/4" NPT concealed all cast-brass traps. The refrigeration system is hermetically sealed and delivers a minimum of 8 gph (30.3 L) of water at 50° F (10° C) cooled from 80° F (26.7° C) inlet water at 90° F (32.2° C) ambient. 115 Volts, 60Hz, rated watts: 370, full load amps: 5 REQUIRES MODELS 1117.8, HCR8 & MTGFR.LG PURCHASED SEPARATELY FOR INDOOR USE ONLY

Touchless sensor upgrades available—call Customer Service at (888) 640-4297:
First sensor +$331, each additional sensor +$107

Pricing Information

$3138 USD
Contact Haws Specials

ADA Low Profile Dual Chilled Vandal-Resistant Fountain

The Haws 1117.8 ADA vandal-resistant chilled drinking fountain uses patented stainless steel, push-button activated, valve assemblies allowing for front access stream adjustment as well as cartridge and strainer access. This wall mounted fountain offers the 'only' all stainless-steel valve body that is machined out of solid bar stock, is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer, and has front access to the water stream height adjustment for easy maintenance without having to remove the valve.

Optional 3000 gallon water filter available (model 6480)
Only stainless steel valve body that is machined out of solid bar stock
100% lead free waterways
Vandal resistant components include the bubblers, buttons, drains and bottom plates
Maintenance is made easy with front access to valve adjustment and cartridge replacement
Beautiful satin finish resists stains and corrosion
14 gauge Type 304 Stainless Steel design provides a well-constructed sturdy fountain
Soft rounded corners prevent from mishaps and other accidents that may occur once the fountain is installed
One-piece stamped bowls with low-profile basin make for an aesthetically pleasing and durable design

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) "NSF/ANSI/CAN 61: Q ≤ 1". Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.

Prop 65 Warning. For California Residents Warning: This product contains a chemical known to the State of California to cause cancer and/or birth defects or other reproductive harm. Please click here for more information.