The Haws 1117LHO-1920HO adjustable vandal-resistant barrier-free Hi-Lo drinking fountain and bottle filler incorporates a sensor operated stainless steel solenoid valves controlled by a transformer for hands-free operation on the bottle filler and on one side of the fountain, and offers the ‘only’ all stainless-steel valve body that is machined out of solid bar stock on the other. It is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer, and has front access to the water stream height adjustment for easy maintenance without having to remove the valve.
- Touchless operation on one side for safety and peace of mind
- Vandal resistant components include the bubblers, button, drains and bottom plates
- 30-second obstruction time-out to reduce tampering of sensor
- 100% lead free waterways
- Easy maintenance with front access to valve adjustment and cartridge replacement
- 1 gpm (3.78 L) bottle filler laminar flow
- Beautiful satin finish resists stains and corrosion
- 14 gauge Type 304 Stainless Steel design provides a well-constructed sturdy fountain
- “Hi-Lo” adjustable design allows for twice the users as regular fountains and suits the needs for various user heights
- Soft rounded corners prevent from mishaps and other accidents that may occur once the fountain is installed
- One-piece stamped bowls with low-profile basin make for an aesthetically pleasing and durable design
- The bottle filler requires a mounting plate; either the 6700 in-wall or the 6700R on-wall support plate. (See options below)
Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and NSF/ANSI/CAN 61: Q ≤ 1.
1922HO – Vandal-Resistant Motion-Activated Bottle Filler w/Drip Tray DrainModel 1922HO vandal-resistant touchless satin stainless steel bottle filler with drain incorporates a sensor operated stainless steel solenoid valve controlled by a transformer for hands-free operation. A pressure regulator is used to adjust the bubbler flow according to incoming water pressures. The drip tray captures all unused water and is sent down the drain.
- Satin stainless steel finish
- Vandal resistant components include the sensor casing and bottom plate
- Touchless operation for safety and peace of mind
- 30-second obstruction time-out to reduce tampering of sensor
- Available steel wall mounting plate recommended
- 1 gpm (3.78 L) Laminar flow
- If back panels are not required, order models 1920 and 6468
- This product requires a mounting plate; either the 6700 in-wall or the 6700R on-wall support plate. (See options below)
Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and NSF/ANSI/CAN 61: Q ≤ 1.
1119.14-1920HO – ADA Vandal-Resistant Drinking Fountain and Motion-Activated Bottle FillerThe Haws 1119.14-1920HO Hi-Lo ADA vandal-resistant drinking fountain and touchless bottle filler incorporates a sensor operated stainless steel solenoid valve controlled by a transformer for hands-free operation on the bottle filler, and offers the ‘only’ all stainless-steel valve body that is machined out of solid bar stock on the fountain. It is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer and has front access to the water stream height adjustment for easy maintenance without having to remove the valve.
- 100% lead-free waterways
- Vandal resistant components include the bubblers, buttons, drains and bottom plates
- 30-second obstruction time-out to reduce tampering of sensor
- 14 gauge Type 304 Stainless Steel design provides a well constructed sturdy fountain
- 1 gpm (3.78 L) bottle filler laminar flow
- Easy maintenance with front access to valve adjustment and cartridge replacement
- Beautiful satin finish resists stains and corrosion
- “Hi-Lo” design allows for twice the users as regular fountains and suits the needs for various user heights
- Soft rounded corners prevent from mishaps and other accidents that may occur once the fountain is installed
- One-piece stamped bowls make for an aesthetically pleasing and durable design
- The bottle filler requires a mounting plate; either the 6700 in-wall or the 6700R on-wall support plate. (See options below)
Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and NSF/ANSI/CAN 61: Q ≤ 1.
H1011.8HPSHO2-1920HPSHO – ADA Vandal-Resistant Chilled Motion-Activated Fountain and Bottle FillerModel H1011.8HPSHO2-1920HPSHO vandal-resistant ADA electric drinking fountain and bottle filler provides 8 gph (30.3 L) chilled water performance in an engineered polished stainless steel skin. This wall-mounted swirl bowl designed fountain incorporates sensor operated stainless steel solenoid valves controlled by a transformer for hands-free operation. A pressure regulator is used to adjust the bubbler flow according to incoming water pressures.
- Touchless operation for safety and peace of mind
- Vandal resistant components include the bubblers, bowls, drains and bottom plates
- 18-gauge Type 304 high-polished stainless steel bowl assembly mounted on a 14-gauge Type 304 high-polished stainless steel wall bracket
- 30-second obstruction time-out to reduce tampering of sensor
- 100% lead-free waterways
- 1 gpm (3.78 L) bottle filler laminar flow
- Grille slots are designed to eliminate sharp edges and are backed with a foam filter to protect the fan motor and high displacement compressor from debris
- Designed to run at a low energy usage, this water cooler is assured to have a long-lasting life
- Laminar flow prevents splashing, keeping the drinking area contained and clean
- Beautiful polished finish resists stains and corrosion
Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and NSF/ANSI/CAN 61: Q ≤ 1.
Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.
H1011.8HPSHO-1920HPSHO – ADA Vandal-Resistant Chilled Motion-Activated/Push Button Fountain w/Bottle FillerModel H1011.8HPSHO-1920HPSHO vandal-resistant electric drinking fountain and bottle filler provides 8 gph (30.3 L) chilled water performance in an engineered polished stainless steel skin. This wall-mounted swirl bowl designed fountain incorporates sensor operated stainless steel solenoid valves controlled by a transformer for hands-free operation with the bottle filler and on one side of the fountain and offers the ‘only’ all stainless-steel valve body that is machined out of solid bar stock on the other. It is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer and has front access to the water stream height adjustment for easy maintenance without having to remove the valve.
- 18-gauge Type 304 high-polished stainless steel bowl assembly mounted on a 14-gauge Type 304 high-polished stainless steel wall bracket
- Vandal resistant components include the bubblers, bowls, button, drains and bottom plates
- 30-second obstruction time-out to reduce tampering of sensor
- 100% lead-free waterways
- 1 gpm (3.78 L) bottle filler laminar flow
- Grille slots are designed to eliminate sharp edges and are backed with a foam filter to protect the fan motor and high displacement compressor from debris
- Designed to run at a low energy usage, this water cooler is assured to have a long-lasting life
- Laminar flow prevents splashing, keeping the drinking area contained and clean
- Maintenance is made easy with front access to valve adjustment and cartridge replacement
- Beautiful polished finish resists stains and corrosion
Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and NSF/ANSI/CAN 61: Q ≤ 1.
Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.
H1011.8HO2-1920HO – ADA Vandal-Resistant Chilled Motion-Activated Fountain and Bottle FillerModel H1011.8HO2-1920HO ADA electric vandal-resistant touchless water cooler and bottle filler provides 8 gph (30.3 L) chilled water performance in an engineered stainless steel skin. This wall-mounted swirl bowl designed fountain incorporates sensor operated stainless steel solenoid valves controlled by a transformer for hands-free operation. A pressure regulator is used to adjust the bubbler flow according to incoming water pressures.
- Touchless operation for safety and peace of mind
- Vandal resistant components include the bubblers, bowls, drains and bottom plates
- 18-gauge Type 304 Stainless Steel bowl assembly mounted on a 14-gauge Type 304 Stainless Steel wall bracket
- 100% lead-free waterways
- 30-second obstruction time-out to reduce tampering of sensor
- 1 gpm (3.78 L) bottle filler laminar flow
- “Hi-lo” design allows for twice the users as regular fountains and suits the needs for various user heights
- Grille slots are designed to eliminate sharp edges and are backed with a foam filter to protect the fan motor and high displacement compressor from debris
- Designed to run at a low energy usage, this water cooler and fountain are assured to have a long-lasting life
- Laminar flow prevents splashing, keeping the drinking area contained and clean
- Beautiful satin finish resists stains and corrosion
Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and NSF/ANSI/CAN 61: Q ≤ 1.
Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.
H1011.8HO-1920HO – ADA Vandal-Resistant Chilled Motion-Activated/Push Button Fountain w/Bottle FillerModel H1011.8HO-1920HO ADA vandal-resistant electric touchless/push button water cooler and bottle filler provides 8 gph (30.3 L) chilled water performance in an engineered stainless steel skin. This wall-mounted swirl bowl designed fountain incorporates sensor operated stainless steel solenoid valves controlled by a transformer for hands-free operation with the bottle filler and on one side of the fountain and offers the ‘only’ all stainless-steel valve body that is machined out of solid bar stock on the other. It is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer and has front access to the water stream height adjustment for easy maintenance without having to remove the valve.
- 18-gauge Type 304 Stainless Steel bowl assembly mounted on a 14-gauge Type 304 Stainless Steel wall bracket
- Vandal resistant components include the bubblers, bowls, button, drains and bottom plates
- 100% lead-free waterways
- 30-second obstruction time-out to reduce tampering of sensor
- 1 gpm (3.78 L) bottle filler laminar flow
- “Hi-lo” design allows for twice the users as regular fountains and suits the needs for various user heights
- Grille slots are designed to eliminate sharp edges and are backed with a foam filter to protect the fan motor and high displacement compressor from debris
- Easy maintenance with front access to valve adjustment and cartridge replacement
- Designed to run at a low energy usage, this water cooler and fountain are assured to have a long-lasting life
- Laminar flow prevents splashing, keeping the drinking area contained and clean
- Beautiful satin finish resists stains and corrosion
Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and NSF/ANSI/CAN 61: Q ≤ 1.
Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.
1109.14-1920HO – ADA Vandal-Resistant 14 Gauge Fountain and Motion-Activated Bottle FillerThe Haws 1109.14-1920HO ADA 14 gauge vandal-resistant drinking fountain and touchless bottle filler incorporates a touchless sensor operated stainless steel solenoid valve controlled by a transformer for hands-free operation on the bottle filler, and offers the ‘only’ all stainless-steel valve body that is machined out of solid bar stock on the fountain. It is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer and has front access to the water stream height adjustment for easy maintenance without having to remove the valve.
- 100% lead-free waterways
- Vandal resistant components include the bubbler, button, drain and bottom plates
- 30-second obstruction time-out to reduce tampering of sensor
- 14 gauge Type 304 Stainless Steel construction and specialized integral mounting plate offer even more protection with a stronger design
- 1 gpm (3.78 L) bottle filler laminar flow
- Easy maintenance with front access to valve adjustment and cartridge replacement
- Beautiful satin finish resists stains and corrosion
- Soft rounded corners prevent from mishaps and other accidents that may occur once the fountain is installed
- One-piece stamped bowl makes for an aesthetically pleasing and durable design
- The bottle filler requires a mounting plate; either the 6700 in-wall or the 6700R on-wall support plate. (See options below)
Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and NSF/ANSI/CAN 61: Q ≤ 1.
1105HO-1920HO – Vandal-Resistant Motion-Activated Fountain and Bottle FillerThe Haws 1105HO-1920HO touchless vandal-resistant drinking fountain and bottle filler incorporates sensor operated stainless steel solenoid valves controlled by a transformer for hands-free operation. A pressure regulator is used to adjust the bubbler flow according to incoming water pressures.
- Touchless operation for safety and peace of mind
- Vandal resistant components include bubbler, drain and bottom plates
- 30-second obstruction time-out to reduce tampering of sensor
- 100% lead-free waterways
- 18 gauge Type 304 Stainless Steel design provides a well constructed sturdy fountain
- Beautiful satin finish resists stains and corrosion
- One-piece stamped bowl makes for an aesthetically pleasing and durable design
- The bottle filler requires a mounting plate; either the 6700 in-wall or the 6700R on-wall support plate. (See options below)
Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and NSF/ANSI/CAN 61: Q ≤ 1.
1105-1920HO – Vandal-Resistant Drinking Fountain and Motion-Activated Bottle FillerThe Haws 1105-1920HO vandal-resistant drinking fountain and touchless bottle filler incorporates a sensor operated stainless steel solenoid valve controlled by a transformer for hands-free operation on the bottle filler, and offers the ‘only’ all stainless-steel valve body that is machined out of solid bar stock on the fountain. It is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer and has front access to the water stream height adjustment for easy maintenance without having to remove the valve.
- 100% lead-free waterways
- Vandal resistant components include bubbler, button, drain and bottom plates
- 30-second obstruction time-out to reduce tampering of sensor
- 18 gauge Type 304 Stainless Steel design provides a well constructed sturdy fountain
- 1 gpm (3.78 L) bottle filler laminar flow
- Easy maintenance with front access to valve adjustment and cartridge replacement
- Beautiful satin finish resists stains and corrosion
- Soft rounded corners prevent from mishaps and other accidents that may occur once the fountain is installed
- One-piece stamped bowl makes for an aesthetically pleasing and durable design
- The bottle filler requires a mounting plate; either the 6700 in-wall or the 6700R on-wall support plate. (See options below)
Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and NSF/ANSI/CAN 61: Q ≤ 1.
1105-1920 – Vandal-Resistant Drinking Fountain and Bottle FillerThe Haws 1105-1920 vandal-resistant drinking fountain and bottle filler uses patented stainless steel, push-button activated, valve assemblies allowing for front access stream adjustment as well as cartridge and strainer access. This wall mounted fountain offers the ‘only’ all stainless-steel valve body that is machined out of solid bar stock, is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer, and has front access to the water stream height adjustment for easy maintenance without having to remove the valve.
- 100% lead-free waterways
- Vandal resistant components include bubbler, buttons, drain and bottom plates
- 18 gauge Type 304 Stainless Steel design provides a well constructed sturdy fountain
- 1 gpm (3.78 L) bottle filler laminar flow
- Easy maintenance with front access to valve adjustment and cartridge replacement
- Beautiful satin finish resists stains and corrosion
- Soft rounded corners prevent from mishaps and other accidents that may occur once the fountain is installed
- One-piece stamped bowl makes for an aesthetically pleasing and durable design
- The bottle filler requires a mounting plate; either the 6700 in-wall or the 6700R on-wall support plate. (See options below)
Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and NSF/ANSI/CAN 61: Q ≤ 1.
1501-1920WHO – ADA Vandal-Resistant Enameled Iron Fountain and Motion-Activated Bottle FillerThe Haws 1501-1920WHO ADA vandal-resistant dual drinking fountain and touchless bottle filler incorporates a sensor operated stainless steel solenoid valve controlled by a transformer for hands-free operation on the bottle filler, and offers the ‘only’ all stainless-steel valve body that is machined out of solid bar stock on the fountain. It is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer and has front access to the water stream height adjustment for easy maintenance without having to remove the valve.
- 100% lead-free waterways
- Vandal resistant components include the bubblers, buttons, drains and bottom plates
- 30-second obstruction time-out to reduce tampering of sensor
- White enameled-iron fountain design provides toughness for the worst of environments
- 1 gpm (3.78 L) bottle filler laminar flow
- Easy maintenance with front access to valve adjustment and cartridge replacement
- Beautiful white enamel fountain and powder-coated bottle filler combination brings pleasing aesthetics to any environment
- Soft rounded corners prevent from mishaps and other accidents that may occur once the fountain is installed
- The bottle filler requires a mounting plate; either the 6700 in-wall or the 6700R on-wall support plate. (See options below)
Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and NSF/ANSI/CAN 61: Q ≤ 1.