The Haws 8605SS Config STD-UD, an enclosed emergency shower and eye wash with a universal drain, features the medically acclaimed AXION MSR stainless steel eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eye washes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain. AXION MSRÂ also offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim of normal showerheads, making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets.
- Type 304 Stainless Steel booth and piping construction with a satin finish
- Integral center location drain strainer with 3 integral side flush drains
- Install flexibility with top or bottom inlet supply
- Large universal labeling and signage for easy locating
- Eyewash streams provide Zero Vertical Velocityâ„¢ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
- A great addition to unsafe environments where the eyes, face, and body may be exposed to corrosive materials
- Requires minimal maintenance and is equipped with test card to record weekly testing
- Reducing installation time, the enclosed emergency shower and eye wash is pre-built and fully pressure tested
Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment.
1311PCH – ADA Child Height Vandal-Resistant White Enameled Iron Fountain and Bottle FillerThe Haws 1311PCH ADA child height vandal-resistant drinking fountain and bottle filler uses patented stainless steel, push-button activated, valve assemblies allowing for front access stream adjustment as well as cartridge and strainer access. This wall mounted fountain offers the ‘only’ all stainless-steel valve body that is machined out of solid bar stock, is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer, and has front access to the water stream height adjustment for easy maintenance without having to remove the valve.
- Optional 3000 gallon water filter available (model 6480)
- Only stainless steel valve body that is machined out of solid bar stock
- 100% lead-free waterways
- Designed for child height ADA access
- Vandal resistant components include the bubbler, buttons, drain and bottom plates
- White enameled-iron fountain design provides toughness for the worst of environments
- 1 gpm (3.78 L) bottle filler laminar flow
- Easy maintenance with front access to valve adjustment and cartridge replacement
- Beautiful white enamel fountain and powder-coated bottle filler combination brings pleasing aesthetics to any environment
- Soft rounded corners prevent from mishaps and other accidents that may occur once the fountain is installed
- The bottle filler requires a mounting plate; either the 6700 in-wall or the 6700R on-wall support plate. (See options below)
Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.
Product Includes:
- 1311: Fountain
- 1920W: Bottle Filler
- BP15WC: Child-Height Back Panel
- 6700 (x2): In-Wall Mounting Plates
The Haws 1109PCH vandal-resistant child height ADA drinking fountain and bottle filler uses patented stainless steel, push-button activated, valve assemblies allowing for front access stream adjustment as well as cartridge and strainer access. This wall mounted fountain offers the ‘only’ all stainless-steel valve body that is machined out of solid bar stock, is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer, and has front access to the water stream height adjustment for easy maintenance without having to remove the valve.
- Optional 3000 gallon water filter available (model 6480)
- Only stainless steel valve body that is machined out of solid bar stock
- 100% lead-free waterways
- Designed for child height ADA access
- Vandal resistant components include bubbler, buttons, drain and bottom plates
- 18 gauge Type 304 Stainless Steel design provides a well constructed sturdy fountain
- 1 gpm (3.78 L) bottle filler laminar flow
- Easy maintenance with front access to valve adjustment and cartridge replacement
- Beautiful satin finish resists stains and corrosion
- Soft rounded corners prevent from mishaps and other accidents that may occur once the fountain is installed
- One-piece stamped bowl makes for an aesthetically pleasing and durable design
Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.
Product Includes:
- 1109: Fountain
- 1920: Bottle Filler
- BP15C: Child-Height Back Panel
- 6469: Drip Tray
- 6700 (x2): In-Wall Mounting Plates
Haws Model 8317CTFP Config STD-SV heat traced combination shower and eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain. AXION MSR also offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets. Virtually eliminating mishaps, the unit’s safety features include: thermal actuator bleed valves for scalding and freezing situations, 120V thermostat cable double wrapped piping, 3/4″ (1.9 cm) insulation surrounding piping and UV protected outside jacket to prevent freezing, as well as a universal emergency sign.
- Perfect for extreme weather conditions dropping down to -30° F (-34.4° C)
- Eyewash streams provide Zero Vertical Velocityâ„¢ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
- Universal design allows for top or bottom water supply
- Scald and freeze protect bleed valves help this unit remain viable in all weather situations
- Requires minimal maintenance and is equipped with test card to record weekly testing
- Reducing installation time, entire unit is pre-built and fully pressure tested
- Solid stainless steel pipe stanchion and galvanized fittings make for a sturdy piece of corrosive resistant equipment
- Rated Class 1, Div 2, Group B, C & D. Temperature code T6
Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment. Model is QPS-C-US Certified, TYPE 4. (Nema 4 equivalent)
1311P – ADA Vandal-Resistant White Enameled Iron Fountain and Bottle FillerThe Haws 1311P ADA vandal-resistant drinking fountain and bottle filler uses patented stainless steel, push-button activated, valve assemblies allowing for front access stream adjustment as well as cartridge and strainer access. This wall mounted fountain offers the ‘only’ all stainless-steel valve body that is machined out of solid bar stock, is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer, and has front access to the water stream height adjustment for easy maintenance without having to remove the valve.
- Optional 3000 gallon water filter available (model 6480)
- Only stainless steel valve body that is machined out of solid bar stock
- 100% lead-free waterways
- Vandal resistant components include the bubbler, buttons, drain and bottom plates
- White enameled-iron fountain design provides toughness for the worst of environments
- 1 gpm (3.78 L) bottle filler laminar flow
- Easy maintenance with front access to valve adjustment and cartridge replacement
- Beautiful white enamel fountain and powder-coated bottle filler combination brings pleasing aesthetics to any environment
- Soft rounded corners prevent from mishaps and other accidents that may occur once the fountain is installed
Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.
Product Includes:
- 1311: Fountain
- 1920w: Bottle Filler
- BP8W:Fountain Back Panel
- BP15W: Bottle Filler Back Panel
- 6700 (x2): In-Wall Mounting Plates
The Haws 1119.14P Hi-Lo ADA vandal-resistant drinking fountain and bottle filler uses patented stainless steel, push-button activated, valve assemblies allowing for front access stream adjustment as well as cartridge and strainer access. This wall mounted fountain offers the ‘only’ all stainless-steel valve body that is machined out of solid bar stock, is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer, and has front access to the water stream height adjustment for easy maintenance without having to remove the valve.
- Optional 3000 gallon water filter available (model 6480)
- Only stainless steel valve body that is machined out of solid bar stock
- 100% lead-free waterways
- Vandal resistant components include the bubblers, buttons, drains and bottom plates
- 14 gauge Type 304 Stainless Steel design provides a well constructed sturdy fountain
- 1 gpm (3.78 L) bottle filler laminar flow
- Easy maintenance with front access to valve adjustment and cartridge replacement
- Beautiful satin finish resists stains and corrosion
- “Hi-Lo” design allows for twice the users as regular fountains and suits the needs for various user heights
- Soft rounded corners prevent from mishaps and other accidents that may occur once the fountain is installed
- One-piece stamped bowls make for an aesthetically pleasing and durable design
Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.
Product Includes:
- 1119.14: 14 Gauge Hi-Lo Fountains
- 1920: Bottle Filler
- BP32: Bottle Filler Back Panel
- 6469: Drip Tray
- 6700.4: In-Wall Mounting Plate
- 6700: Bottle Filler Mounting Plate
The Haws 1119P Hi-Lo ADA vandal-resistant drinking fountain and bottle filler uses patented stainless steel, push-button activated, valve assemblies allowing for front access stream adjustment as well as cartridge and strainer access. This wall mounted fountain offers the ‘only’ all stainless-steel valve body that is machined out of solid bar stock, is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer, and has front access to the water stream height adjustment for easy maintenance without having to remove the valve.
- Optional 3000 gallon water filter available (model 6480)
- Only stainless steel valve body that is machined out of solid bar stock
- 100% lead-free waterways
- Vandal resistant components include the bubblers, buttons, drains and bottom plates
- 18 gauge Type 304 Stainless Steel design provides a well constructed sturdy fountain
- 1 gpm (3.78 L) bottle filler laminar flow
- Easy maintenance with front access to valve adjustment and cartridge replacement
- Beautiful satin finish resists stains and corrosion
- “Hi-Lo” design allows for twice the users as regular fountains and suits the needs for various user heights
- Soft rounded corners prevent from mishaps and other accidents that may occur once the fountain is installed
- One-piece stamped bowls make for an aesthetically pleasing and durable design
Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.
Product Includes:
- 1119: Hi-Lo Fountains
- 1920: Bottle Filler
- BP32: Bottle Filler Back Panel
- 6469: Drip Tray
- 6700.4: In-Wall Mounting Plate
- 6700: Bottle Filler Mounting Plate
The Haws 1109P ADA vandal-resistant drinking fountain and bottle filler uses patented stainless steel, push-button activated, valve assemblies allowing for front access stream adjustment as well as cartridge and strainer access. This wall mounted fountain offers the ‘only’ all stainless-steel valve body that is machined out of solid bar stock, is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer, and has front access to the water stream height adjustment for easy maintenance without having to remove the valve.
- Optional 3000 gallon water filter available (model 6480)
- Only stainless steel valve body that is machined out of solid bar stock
- 100% lead-free waterways
- Vandal resistant components include bubbler, buttons, drain and bottom plates
- 18 gauge Type 304 Stainless Steel design provides a well constructed sturdy fountain
- 1 gpm (3.78 L) bottle filler laminar flow
- Easy maintenance with front access to valve adjustment and cartridge replacement
- Beautiful satin finish resists stains and corrosion
- Soft rounded corners prevent from mishaps and other accidents that may occur once the fountain is installed
- One-piece stamped bowl makes for an aesthetically pleasing and durable design
Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.
Product Includes:Â
- 1109: Fountain
- 6469: Drip Tray
- 1920: Bottle Filler
- BP3: Fountain Back Panel
- BP15: Bottle Filler Back Panel
- 6700: In-Wall Mounting Pate
The Haws 1011MSP barrier-free vandal-resistant Hi-Lo stainless-steel drinking fountain and bottle filler uses patented stainless steel, push-button activated, valve assemblies allowing for front access stream adjustment as well as cartridge and strainer access. This wall mounted fountain offers the ‘only’ all stainless-steel valve body that is machined out of solid bar stock, is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer, and has front access to the water stream height adjustment for easy maintenance without having to remove the valve.
- Optional 3000 gallon water filter available (model 6480)
- Only stainless steel valve body that is machined out of solid bar stock
- 18 gauge Type 304 Stainless Steel bowl assemblies mounted on a 14 gauge Type 304 Stainless Steel wall brackets
- Vandal resistant components include the bubblers, bowls, buttons, drains and bottom plates
- Front access plate allows for front access of P-trap and stop
- 100% lead-free waterways
- Polished chrome-plated brass bubbler heads with integral laminar anti-squirt flow eliminate water splash
- 1 gpm (3.78 L) bottle filler laminar flow
- Easy maintenance with front access to valve adjustment and cartridge replacement
- “Hi-Lo” design allows for twice the users as regular fountains and suits the needs for various user heights
Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.
Product Includes:
- 1011MS: Swirl Bowl Fountains and Mounting System
- 1920: Bottle Filler
- BP32: Bottle Filler Back Panel
- MTGFR.DF2: In-Wall Mounting Frame
- 6700: In-Wall Mounting Plate
The Haws 1011P barrier-free Hi-Lo stainless-steel vandal-resistant water fountain and bottle filler uses patented stainless steel, push-button activated, valve assemblies allowing for front access stream adjustment as well as cartridge and strainer access. This wall mounted fountain offers the ‘only’ all stainless-steel valve body that is machined out of solid bar stock, is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer, and has front access to the water stream height adjustment for easy maintenance without having to remove the valve.
- Optional 3000 gallon water filter available (model 6480)
- Only stainless steel valve body that is machined out of solid bar stock
- 18 gauge Type 304 Stainless Steel bowl assemblies mounted on a 14 gauge Type 304 Stainless Steel wall brackets
- Vandal resistant components include bubblers, bowls, buttons, drains and bottom plates
- 100% lead-free waterways
- Polished chrome-plated brass bubbler heads with integral laminar anti-squirt flow eliminate water splash
- 1 gpm (3.78 L) bottle filler laminar flow
- Easy maintenance with front access to valve adjustment and cartridge replacement
- “Hi-Lo” design allows for twice the users as regular fountains and suits the needs for various user heights
This water fountain bottle filler meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.
Product Includes:
- 1011: Swirl Bowl Fountains
- 1920: Bottle Filler
- BP32: Bottle Filler Back Panel
- 6700.4: In-Wall Mounting Plate
- 6700: In-Wall Mounting Plate
The Haws 7501 Config STD-9083 compact portable eyewash is a 9-gallon (34.1 L) capacity gravity operated portable eyewash that supplies a continuous flow of water for a full 15 minutes at .4 gpm. This unit is a cost-effective solution ideal for locations without access to potable water, including temporary decontamination sites, temporary treatment facilities, and short-term job sites. The 9083 cleansing stick provides clean water and ANSI compliance in equipment up to 15 gallons (60 L) for up to three years when serviced just once annually.
- Featuring a FDA approved high-density green polyethylene tank that is easily activated by pulling the yellow activation arm down to the open position
- A wide-fill opening with a securely threaded cap, and a pronounced ‘Max Fill’ line permits easy inspection, cleaning and filling
- Relocation is simple due to ‘Lift Here’ graphics, easily mounted bracket (included) and light design of this 9-gallon (34.1 L) portable
- Measurements: 14-1/2″ high, 22″ wide, 10-1/8″ (36.8 x 55.9 x 25.7 cm) deep. *Note: Unit must be wall hung
Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment.
1011HS – Haws RIVIVEâ„¢ Hydration Stationâ„¢ Recessed Bottle Filler with HI-LO FountainsModel | 1011HS |
Material | 14-gauge Type 304 Stainless Steel fountain brackets with the remainder of unit 18-gauge in a satin finish |
Features |
Vandal Resistant
Programable
Auto purge feature automatically cycles once every 24 hours
|
Dimensions |
Length: 18-5/8″
Width: 38-1/4″
Height: 28-3/8″
|
ADA | Yes |
Hygienic Features |
24-Hour Purge of water line
Sensor Operated Bottle Filler
100% lead-free waterways
|
Field Configurable Filtering | Choose between filtered or non-filtered water with the included interchangeable 3000-gallon filter and 5y rated strainer. |
Included Components |
Bottle Filler and Fountains
Mounting Frame
Interchangeable filter and strainer
|
Power | <1 Amp |
Code Compliance |
ADA
NSF/ANSI/CAN 61- Section 9
CSA Certified
NSF/ANSI/CAN 372
California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100)
NSF/ANSI/CAN 61: Q ≤ 1
|
Mounting | Wall Mounted (In-Wall Frame Included) |
Model 1011HS barrier-free vandal-resistant drinking fountain and motion-activated bottle filling station uses a patented stainless-steel valve body that is machined out of solid bar stock, is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer, and has front access to the water stream height adjustment for easy maintenance without having to remove the valve. Outfitted with such protective features as vandal-resistant bubbler heads, waste strainers, and bottom plates, this electric water cooler is quick to discourage vandals.
- The fountains stainless steel valve body is the only one on the market machined from solid bar stock
- 18-gauge Type 304 Stainless Steel bowl assemblies mounted on 14-gauge Type 304 Stainless Steel wall brackets
- Vandal resistant components include the bubblers, bowls, buttons, drains and bottom plates
- Engineered waste plumbing with enough access room for water stop, electrical junction box, filter and drain connections (requires rear access)
- LED lighted 12″ sensor operated bottle opening with quick 1.1 gpm fill rate and laminar flow with front access for changing filter
- 3000 gallon (11356 L) capacity, Electronic Lifecycle Control filter cartridge, with filter replacement indicator light. When filter expires, solenoid stops dispensing water to bottle filler
- Auto purge feature automatically cycles once every 24 hours, if no use, to assure a fresh water supply as well as trap integrity
- 100% lead-free waterways
- Display menu which shows sensor range adjustment, factory reset, software/firmware version readout and error readout, along with bottle counter showing number of bottles saved
- Vandal-resistant sensor resists scratching and water droplet fowling, and is separated from display for maintenance
- Easy maintenance with front fountain access to valve adjustment and cartridge replacement
Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.