The multi bubbler Haws 1435-1920W vandal-resistant enameled iron, drinking fountain with bottle filler incorporates patented stainless steel, push button activated, valve assemblies allowing for front access stream adjustments as well as cartridge and strainer access. This wall mounted fountain offers the ‘only’ all stainless-steel valve body that is machined out of solid bar stock, is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer, and has front access to the water stream height adjustment for easy maintenance without having to remove the valve.
- 100% lead-free waterways
- Vandal resistant components include the bubblers, buttons, drain and bottom plates
- 1 gpm (3.78 L) bottle filler laminar flow
- Easy maintenance with front access to valve adjustment and cartridge replacement
- Gleaming white enameled iron construction provides this fountain with a bullet proof durability hidden beneath its elegant appeal
- Soft rounded corners prevent mishaps and other accidents that may occur once the fountain is installed
- Triple bubbler heads locked to main bowl prevent against vandals and provide efficient water flow in high traffic areas
- The bottle filler requires a mounting plate; either the 6700 in-wall or the 6700R on-wall support plate. (See options below)
Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and NSF/ANSI/CAN 61: Q ≤ 1.
- Note: Enameled iron bowls are shipped without the hardware mounted. Hardware to be mounted by installer.
The Haws 8606SS walk-through booth enclosed combination shower and eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly. This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eye washes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain. AXION MSRÂ also offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim of normal showerheads, making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets.
- Type 304 Stainless Steel dual-entry walk-through booth and piping construction with a satin finish
- Integral center location drain strainer
- Install flexibility with top or bottom inlet supply
- Large universal labeling and signage for easy locating
- Eyewash streams provide Zero Vertical Velocityâ„¢ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
- A great addition to unsafe environments where the eyes, face, and body may be exposed to corrosive materials
- Requires minimal maintenance and is equipped with test card to record weekly testing
- Reducing installation time, the entire unit is pre-built and fully pressure tested
Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.
8605SS – AXION® MSR Stainless Steel Booth Enclosed Shower and Eye/Face WashThe Haws 8605SS booth enclosed combination shower and eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eye washes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain. AXION MSR also offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim of normal showerheads, making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets.
- Type 304 Stainless Steel booth and piping construction with a satin finish
- Integral center location drain strainer
- Install flexibility with top or bottom inlet supply
- Large universal labeling and signage for easy locating
- Eyewash streams provide Zero Vertical Velocityâ„¢ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
- A great addition to unsafe environments where the eyes, face, and body may be exposed to corrosive materials
- Requires minimal maintenance and is equipped with test card to record weekly testing
- Reducing installation time, the entire unit is pre-built and fully pressure tested
Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.
7661 – Hand Wash Sink with AXION Eye/Face WashModel 7661 barrier-free hand wash sink with eye and face wash features the medically acclaimed AXION MSRÂ eye/face wash head assembly. This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain.
- 30″ wide 14-gauge Type 304 Stainless Steel sink mounted on 14 gauge Type 304 Stainless Steel sink supports
- Integral to the sink construction is the seamless 1-1/2″ male NPT drain with 1-1/2″ trap and tailpiece supplied
- Motion-activated faucet operation (operating on 110VAC or battery power) for safety and peace of mind
- Supplied with .5 gpm and 1.2 gpm laminar flow faucet nozzles, with an optional 2.2 gpm laminar flow nozzle available for higher flow applications
- Mixing valve included supplies tepid water to the eyewash and faucet, needing only single set of hot and cold water supply lines
- Eye/face wash streams provide Zero Vertical Velocityâ„¢ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
- Rounded sink edges lessen risk of injury and hinder both non-hygienic clutter and water pooling
- Beautiful satin finish resists stains and corrosion
- Easy access to the mixing valve, faucet solenoid valve, plumbing and drain through the large front panel
Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment. CSA B125.1, and CSA B45.4 certified.
7660 – Hand Wash Sink with AXION Eye/Face WashModel 7660 barrier-free eye wash sink with eye and face wash features the medically acclaimed AXION MSR eye/face wash head assembly. This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain.
- 24″ wide 14-gauge Type 304 Stainless Steel sink mounted on 14 gauge Type 304 Stainless Steel sink supports
- Integral to the sink construction is the seamless 1-1/2″ male NPT drain with 1-1/2″ trap and tailpiece supplied
- Motion-activated faucet operation (operating on 110VAC or battery power) for safety and peace of mind
- Supplied with .5 gpm and 1.2 gpm laminar flow faucet nozzles, with an optional 2.2 gpm laminar flow nozzle available for higher flow applications
- Single mixing valve included supplies tepid water to the eyewash and faucet, needing only single set of hot and cold water supply lines
- Eye/face wash streams provide Zero Vertical Velocityâ„¢ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
- Rounded sink edges lessen risk of injury and hinder both non-hygienic clutter and water pooling
- Beautiful satin finish resists stains and corrosion
- Easy access to the mixing valve, faucet batteries, plumbing and drain through the large front panel
Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment. CSA B125.1, and CSA B45.4 certified.Â
1117LHO2-1920HO – ADA Adjustable Vandal-Resistant Motion-Activated Fountain and Bottle FillerThe Haws 1117LHO2-1920HO adjustable barrier-free vandal-resistant Hi-Lo touchless drinking fountain and bottle filler incorporates sensor operated stainless steel solenoid valves controlled by a transformer for hands-free operation. A pressure regulator is used to adjust the bubbler flow according to incoming water pressures.
- Touchless operation for safety and peace of mind
- Vandal resistant components include the bubblers, drains and bottom plates
- 30-second obstruction time-out to reduce tampering of sensor
- 100% lead free waterways
- 1 gpm (3.78 L) bottle filler laminar flow
- Beautiful satin finish resists stains and corrosion
- 14 gauge Type 304 Stainless Steel design provides a well-constructed sturdy fountain
- “Hi-Lo” adjustable design allows for twice the users as regular fountains and suits the needs for various user heights
- Soft rounded corners prevent from mishaps and other accidents that may occur once the fountain is installed
- One-piece stamped bowls with low-profile basin make for an aesthetically pleasing and durable design
- The bottle filler requires a mounting plate; either the 6700 in-wall or the 6700R on-wall support plate. (See options below)
Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and NSF/ANSI/CAN 61: Q ≤ 1.
1117LHO-1920HO – ADA Adjustable Vandal-Resistant Motion-Activated/Push Button Fountain and Bottle FillerThe Haws 1117LHO-1920HO adjustable vandal-resistant barrier-free Hi-Lo drinking fountain and bottle filler incorporates a sensor operated stainless steel solenoid valves controlled by a transformer for hands-free operation on the bottle filler and on one side of the fountain, and offers the ‘only’ all stainless-steel valve body that is machined out of solid bar stock on the other. It is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer, and has front access to the water stream height adjustment for easy maintenance without having to remove the valve.
- Touchless operation on one side for safety and peace of mind
- Vandal resistant components include the bubblers, button, drains and bottom plates
- 30-second obstruction time-out to reduce tampering of sensor
- 100% lead free waterways
- Easy maintenance with front access to valve adjustment and cartridge replacement
- 1 gpm (3.78 L) bottle filler laminar flow
- Beautiful satin finish resists stains and corrosion
- 14 gauge Type 304 Stainless Steel design provides a well-constructed sturdy fountain
- “Hi-Lo” adjustable design allows for twice the users as regular fountains and suits the needs for various user heights
- Soft rounded corners prevent from mishaps and other accidents that may occur once the fountain is installed
- One-piece stamped bowls with low-profile basin make for an aesthetically pleasing and durable design
- The bottle filler requires a mounting plate; either the 6700 in-wall or the 6700R on-wall support plate. (See options below)
Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and NSF/ANSI/CAN 61: Q ≤ 1.
1435-1920WHO – Vandal-Resistant Enameled Iron Fountain and Motion-Activated Bottle FillerThe multi bubbler Haws 1435-1920WHO vandal-resistant enameled iron, touchless drinking fountain with bottle filler incorporates a sensor operated stainless steel solenoid valve controlled by a transformer for hands-free operation on the bottle filler, and offers the ‘only’ all stainless-steel valve body that is machined out of solid bar stock on the fountain. It is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer and has front access to the water stream height adjustment for easy maintenance without having to remove the valve.
- 100% lead-free waterways
- Vandal resistant components include the bubblers, buttons, drain and bottom plates
- 1 gpm (3.78 L) bottle filler laminar flow
- Gleaming white enameled iron construction provides this fountain with a bullet proof durability hidden beneath its elegant appeal
- Touchless operation for safety and peace of mind on the bottle filler
- 30-second obstruction time-out to reduce tampering of sensor
- Soft rounded corners prevent mishaps and other accidents that may occur once the fountain is installed
- Triple bubbler heads locked to main bowl prevent against vandals and provide efficient water flow in high traffic areas
- The bottle filler requires a mounting plate; either the 6700 in-wall or the 6700R on-wall support plate. (See options below)
Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and NSF/ANSI/CAN 61: Q ≤ 1.
- Note: Enameled iron bowls are shipped without the hardware mounted. Hardware to be mounted by installer.
The multi bubbler Haws 1435HO-1920WHO vandal-resistant enameled iron, touchless drinking fountain with bottle filler uses sensor operated stainless steel solenoid valves controlled by a transformer for hands-free operation. A pressure regulator is used to adjust the bubbler flow according to incoming water pressures. Equipped with vandal resistant components, this fountain is not easily disrupted, quickly discouraging vandals.
- 100% lead-free waterways
- Vandal resistant components include the bubblers, drain and bottom plates
- 1 gpm (3.78 L) bottle filler laminar flow
- Gleaming white enameled iron construction provides this fountain with a bullet proof durability hidden beneath its elegant appeal
- Touchless operation for safety and peace of mind
- 30-second obstruction time-out to reduce tampering of sensor
- Soft rounded corners prevent mishaps and other accidents that may occur once the fountain is installed
- Triple bubbler heads locked to main bowl prevent against vandals and provide efficient water flow in high traffic areas
- The bottle filler requires a mounting plate; either the 6700 in-wall or the 6700R on-wall support plate. (See options below)
Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and NSF/ANSI/CAN 61: Q ≤ 1.
- Note: Enameled iron bowls are shipped without the hardware mounted. Hardware to be mounted by installer.
The multi bubbler Haws 1435HO vandal-resistant enameled iron, touchless drinking fountain uses sensor operated stainless steel solenoid valves controlled by a transformer for hands-free operation. A pressure regulator is used to adjust the bubbler flow according to incoming water pressures. Equipped with vandal resistant components, this fountain is not easily disrupted, quickly discouraging vandals.
- 100% lead-free waterways
- Vandal resistant components include the bubblers, drain and bottom plate
- Gleaming white enameled iron construction provides this fountain with a bullet proof durability hidden beneath its elegant appeal
- Touchless operation for safety and peace of mind
- 30-second obstruction time-out to reduce tampering of sensor
- Soft rounded corners prevent mishaps and other accidents that may occur once the fountain is installed
- Triple bubbler heads locked to main bowl prevent against vandals and provide efficient water flow in high traffic areas
Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and NSF/ANSI/CAN 61: Q ≤ 1.
- Note: Enameled iron bowls are shipped without the hardware mounted. Hardware to be mounted by installer.
The multi-bubbler Haws 1431HO vandal-resistant enameled iron, wheelchair accessible touchless drinking fountain uses sensor operated stainless steel solenoid valves controlled by a transformer for hands-free operation. A pressure regulator is used to adjust the bubbler flow according to incoming water pressures. Equipped with vandal resistant components, this fountain is not easily disrupted, quickly discouraging vandals.
- Touchless operation for safety and peace of mind
- Vandal resistant components include the bubblers, drain and bottom plate
- 30-second obstruction time-out to reduce tampering of sensor
- 100% lead-free waterways
- Gleaming white enameled iron construction provides this fountain with a bullet proof durability hidden beneath its elegant appeal
- Soft rounded corners prevent mishaps and other accidents that may occur once the fountain is installed
- Dual bubbler heads locked to main bowl prevent against vandals and provide efficient water flow for twice the users as single bubbler fountains
Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and NSF/ANSI/CAN 61: Q ≤ 1.
- Note: Enameled iron bowls are shipped without the hardware mounted. Hardware to be mounted by installer.
The multi-bubbler Haws 1441HO cast aluminum, wheelchair accessible drinking fountain uses sensor operated stainless steel solenoid valves controlled by a transformer for hands-free operation. A pressure regulator is used to adjust the bubbler flow according to incoming water pressures. Equipped with vandal resistant components, this fountain is not easily disrupted, quickly discouraging vandals.
- Touchless operation for safety and peace of mind
- Vandal resistant components include the bubblers, drain and bottom plate
- 30-second obstruction time-out to reduce tampering of sensor
- 100% lead-free waterways
- White powder-coated cast aluminum construction mixes just the right amount of durability and appeal in an efficiently functioning fountain
- Soft rounded corners prevent mishaps and other accidents that may occur once the fountain is installed
- Elegant gloss finish resists stains keeping the fountain protected
- Two bubbler heads locked to main bowl prevent against vandals and provide efficient water flow in high traffic areas
Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and NSF/ANSI/CAN 61: Q ≤ 1.