Home / Products / H1011.8-1920 – ADA Vandal-Resistant Chilled Dual Fountain and Bottle Filler

H1011.8-1920

ADA Vandal-Resistant Chilled Dual Fountain and Bottle Filler

Model H1011.8-1920 ADA vandal-resistant, stainless steel drinking fountain and bottle filler with remote chiller. (For mounting bottle filler, see options below)
Contact Us for a Custom Solution

Required Parts Sold Separately

Fountain with Bottle Filler Spec Sheet

MasterSpec® Files

Limited Warranty

Specifications

Model H1011.8- 1920 ADA vandal-resistant wall-mounted drinking fountain and bottle filler shall include dual 18-gauge Type 304 Stainless Steel satin finish basins with integral swirl design, 14 gauge Type 304 Stainless Steel wall brackets and bottle filler bracket, 100% lead-free waterways, vandal-resistant push-button operated stainless steel valves with front accessible cartridge and flow adjustment, polished chrome-plated brass vandal resistant bubbler heads with integral laminar anti-squirt flow , 1 gpm (3.78 L) laminar flow bottle filler, chrome-plated brass vandal-resistant waste strainers, vandal-resistant bottom plates, stainless steel satin finish back panels and louvered intrusion-proof grill, high and low fountain mounting levels, and 1-1/4” O.D. (3.2 cm) waste pipes. The R-134a refrigeration system is hermetically sealed and delivers a minimum of 8 gph (30.3 L) of water at 50° F (10° C), 115 Volts, 60Hz, rated watts: 370, full load amps: 5. Haws electric water coolers comply with ARI Standard 1010 and ANSI A117.1, and are listed by Underwriter Laboratories to U.S. and Canadian standards.

Pricing Information

$6207 USD
Contact Haws Specials

ADA Vandal-Resistant Chilled Dual Fountain and Bottle Filler

Model H1011.8-1920 vandal-resistant electric ADA water cooler and bottle filler provides 8 gph (30.3 L) chilled water performance in an engineered stainless steel skin. This wall-mounted swirl bowl designed fountain offers the only all stainless-steel valve body that is machined out of solid bar stock, is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer, and has front access to the water stream height adjustment for easy maintenance without having to remove the valve.

Only stainless steel valve body that is machined out of solid bar stock
18-gauge Type 304 Stainless Steel bowl assembly mounted on a 14-gauge Type 304 Stainless Steel wall bracket
Vandal resistant components include the bubblers, bowls, buttons, drains and bottom plates
100% lead-free waterways
1 gpm (3.78 L) bottle filler laminar flow
"Hi-lo" design allows for twice the users as regular fountains and suits the needs for various user heights
Grille slots are designed to eliminate sharp edges and are backed with a foam filter to protect the fan motor and high displacement compressor from debris
Easy maintenance with front access to valve adjustment and cartridge replacement
Designed to run at a low energy usage, this water cooler and fountain are assured to have a long-lasting life
Laminar flow prevents splashing, keeping the drinking area contained and clean
Beautiful satin finish resists stains and corrosion

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) "NSF/ANSI/CAN 61: Q ≤ 1". Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.

Prop 65 Warning. For California Residents Warning: This product contains a chemical known to the State of California to cause cancer and/or birth defects or other reproductive harm. Please click here for more information.