Home / Products / 1107P – ADA Low Profile Vandal-Resistant Fountain and Bottle Filler

1107P

ADA Low Profile Vandal-Resistant Fountain and Bottle Filler

Model 1107P, wall mounted vandal-resistant, low profile ADA, 14 gauge stainless steel drinking fountain and bottle filler with 100% lead free waterways.
Product Includes:

1107: Single Fountain
1920: Bottle Filler
BP7: Back Panel
BP15: Back Panel
6700 (x2): In-Wall Mounting Plate

Spec Sheet & Installation Drawing

Operational / Maintenance Manual

Parts Breakdown Drawing

3D Revit (RFA)

MasterSpec® Files

Limited Warranty

Specifications

Model 1107P wall-mounted vandal-resistant ADA drinking fountain and bottle filler shall include a 14-gauge Type 304 Stainless Steel satin-finish basin with integral 1/4” stainless steel mounting plate, 14 gauge bottle filler bracket, 3/16″ (.47 cm) thick steel in-wall mounting plate for fountain and bottle filler, vandal-resistant push button operated stainless steel valves with front accessible cartridge and flow adjustment that provide 100% lead-free waterways, polished chrome plated brass vandal-resistant bubbler head with integral laminar anti-squirt flow, 1 gpm (3.78 L) laminar flow bottle filler, polished chrome-plated brass vandal-resistant waste strainer, vandal-resistant bottom plates, and 1-1/4” NPT integral trap. Unit can be mounted to meet ADA or Child ADA specifications. In extreme environments related to heat and cold, product(s) must be protected from damage/exposure due to these extreme conditions.

Touchless sensor upgrades available—call Customer Service at (888) 640-4297:
First sensor +$331, each additional sensor +$107

Pricing Information

$3048 USD
Contact Haws Specials

ADA Low Profile Vandal-Resistant Fountain and Bottle Filler

The Haws 1107P vandal-resistant low profile barrier-free drinking fountain and bottle filler use patented stainless steel, push-button activated, valve assemblies allowing for front access stream adjustment as well as cartridge and strainer access. This wall mounted fountain offers the 'only' all stainless-steel valve body that is machined out of solid bar stock, is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer, and has front access to the water stream height adjustment for easy maintenance without having to remove the valve.

Optional 3000 gallon water filter available (model 6480)
Only stainless steel valve body that is machined out of solid bar stock
100% lead free waterways
Vandal resistant components include bubbler, buttons, drain and bottom plates
1 gpm (3.78 L) bottle filler laminar flow
14 gauge Type 304 Stainless Steel design with integral mounting plate provides a well constructed sturdy fountain
Easy maintenance with front access to valve adjustment and cartridge replacement
Beautiful satin finish resists stains and corrosion
Soft rounded corners prevent mishaps and other accidents that may occur once the fountain is installed
One-piece stamped basin with low-profile design make for an aesthetically pleasing and durable unit

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) "NSF/ANSI/CAN 61: Q ≤ 1". Product Includes:

1107: Single Fountain
1920: Bottle Filler
BP7: Back Panel
BP15: Back Panel
6700 (x2): In-Wall Mounting Plate

Prop 65 Warning. For California Residents Warning: This product contains a chemical known to the State of California to cause cancer and/or birth defects or other reproductive harm. Please click here for more information.