The Haws 1001P barrier-free vandal-resistant drinking fountain and bottle filler uses patented stainless steel push-button valve assemblies allowing for front access stream adjustment as well as cartridge and strainer access. This wall mounted fountain/bottle filler offers the ‘only’ all stainless-steel valve body that is machined out of solid bar stock, is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer, and has front access to the water stream height adjustment for easy maintenance without having to remove the valve.
- Optional 3000 gallon water filter available (model 6480)
- Only stainless steel valve body that is machined out of solid bar stock
- 18 gauge Type 304 Stainless Steel bowl assembly mounted on a 14 gauge Type 304 Stainless Steel wall bracket and bottle filler
- Vandal resistant components include the bubbler, bowl, buttons, drain and bottom plates
- 100% lead-free waterways
- 1 gpm (3.78 L) bottle filler laminar flow
- Trap and shut off must be in the wall
- Polished chrome-plated brass bubbler head with integral laminar anti-squirt flow eliminate water splash
- Easy maintenance with front access to valve adjustment and cartridge replacement
Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.
Product Includes:
- 1001: Single Drinking Fountain
- 1920: Bottle Filler
- BP6: Back Panel
- BP15: Back Panel
- 6700 (X2): In-Wall Mounting Plates
The Haws model PBA8C copper push button provides a safe and hygienic way to upgrade existing products supplied with the 5010SS valve, is made with 99.9% copper plating, and includes the push button and retaining nut.
Note:
Copper is broadly recognized for its antimicrobial properties across many industries including hospitals. Copper and its alloys, such as brass, bronze and copper-nickel, are inherently antimicrobial. When cleaned regularly, frequently touched surfaces manufactured from uncoated copper alloy materials will continuously kill bacteria that cause infections. (www.copper.org)
The Haws model PBA7C provides a safe and hygienic way to upgrade existing Haws drinking fountains. The non-flanged push button assembly can be used as an option to the chrome push button supplied with the 5874PB valve system, is made with 99.9% copper plating (button only), and includes the push button, operator, round locknut, snap ring, and wave washer. This model is used on recessed mounted (not flush mount) push button drinking fountains.
Note:
Copper is broadly recognized for its antimicrobial properties across many industries including hospitals. Copper and its alloys, such as brass, bronze and copper-nickel, are inherently antimicrobial. When cleaned regularly, frequently touched surfaces manufactured from uncoated copper alloy materials will continuously kill bacteria that cause infections. (www.copper.org)
The Haws model PBA6C provides a safe and hygienic way to upgrade existing Haws drinking fountains. The flanged push button assembly can be used as an option to the chrome push button supplied with the 5874PBF valve system, is made with 99.9% copper plating (button only), and includes the push button, operator, round locknut, snap ring, and wave washer. This model is used on flush mounted (not recessed) push button drinking fountains.
Note:
Copper is broadly recognized for its antimicrobial properties across many industries including hospitals. Copper and its alloys, such as brass, bronze and copper-nickel, are inherently antimicrobial. When cleaned regularly, frequently touched surfaces manufactured from uncoated copper alloy materials will continuously kill bacteria that cause infections. (www.copper.org)
The Haws 1210SF wall-mount filtered ADA bottle filling station is the newest addition to the most comprehensive hydration offering in the industry. The modern, innovative design is tailored to meld with office spaces, universities and airports, or serve the functional needs of spaces like a school gymnasium. Sensor activated bottle filler allows for hands free operation, and intuitive LED electronic display keeps the user informed with how many plastic bottles have been saved. Fresh, always filtered water with the Electronic Lifecycle Control feature shuts water flow off when filter reaches its gallons capacity. Flow will begin again when filter is replaced.
- Energy-Efficient Refrigeration Evaporator: Enhanced tankless evaporator coil using thermal mass cooling technology, with 100 percent water content flushed with every use
- Hygienic hands-free sensor operated bottle filler with vandal-resistant sensor that resists scratching and water droplet fowling
- Auto-purge feature automatically cycles once every 24 hours to assure a fresh water supply as well as trap integrity
- LED illuminated bottle fill area
- Quick 1.1 GPM fill rate (depending on incoming pressure) for bottle filler
- Smart energy savings feature powers down refrigeration system after 2 hours of non-use, and will automatically start again when used
- Programmable to be shut-down during planned facility closures, weekends, etc.
- High traffic area ready with a 3000-gallon (11,356 L) capacity filter
- Raised platform for easy bottle resting and filling
- Durable, easy to clean 304 stainless-steel skin
- Retrofit installation compatibility over many existing water coolers
- 100% lead free waterways
- Galvanized steel frame
- Rated for indoor use
- Designed and assembled in the USA
CSA certified to comply with NSF/ANSI 42, NSF/ANSI 53, NSF/ANSI/CAN 61: Q ≤ 1, NSF/ANSI/CAN 372, ASME A112.18.1/CSA B125.1, UL 399 and CSA C22.2 No. 120. ADA compliant to ICC A117.1, CSA B651, DOJ’s 2010 ADA Standards for Accessible Design when properly installed. ASHRAE 18 compliant chilling capacity. FCC ID: 2AUAN-1200SM and IC: 25359-1200SM
Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine), and failure to heed these conditions may void warranty.
1210S – Wall Mount Indoor ADA Bottle FillerThe Haws 1210S indoor wall-mount ADA bottle filler is the newest addition to the most comprehensive hydration offering in the industry. The modern, innovative design is tailored to meld with office spaces, universities and airports, or serve the functional needs of spaces like a school gymnasium. Sensor-activated bottle filler allows for hands-free operation, and intuitive LED electronic display keeps the user informed with how many plastic bottles have been saved.
- Energy-Efficient Refrigeration Evaporator: Enhanced tankless evaporator coil using thermal mass cooling technology, with 100 percent water content flushed with every use
- Hygienic hands-free sensor operated bottle filler with vandal-resistant sensor that resists scratching and water droplet fowling
- Auto purge feature automatically cycles once every 24 hours to assure a fresh water supply as well as trap integrity
- LED illuminated bottle fill area
- Quick 1.1 GPM fill rate (depending on incoming pressure) for bottle filler
- Smart energy savings feature powers down refrigeration system after two hours of non-use, and will automatically start again when used
- Programmable to be shut-down during planned facility closures, weekends, etc.
- Raised platform for easy bottle resting and filling
- Durable, easy-to-clean 304 stainless-steel skin
- Retrofit installation compatibility over many existing competitor water coolers
- 100% lead free waterways
- Galvanized steel frame
- Rated for indoor use
- Designed and assembled in the USA
CSA certified to comply with NSF/ANSI/CAN 61: Q ≤ 1, NSF/ANSI/CAN 372, ASME A112.18.1/CSA B125.1, UL 399 and CSA C22.2 No. 120. ADA compliant to ICC A117.1, CSA B651, DOJ’s 2010 ADA Standards for Accessible Design when properly installed. ASHRAE 18 compliant chilling capacity. FCC and CAN ICES – 3(A)/NMB-3(A).
Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine), and failure to heed these conditions may void warranty.
3690 Config WM – Outdoor Wall Mounted Bottle FillerThe Haws 3690 Config WM, wall mounted, heavy-duty outdoor, ADA accessible Outdoor Wall Mounted Bottle Filler uses a patented push-button stainless steel valve assembly allowing for front access stream adjustment as well as cartridge and strainer access. This wall mounted stainless steel bottle filler offers the ‘only’ all stainless-steel valve body that is machined out of solid bar stock, is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer, and has front access to the water stream height adjustment for easy maintenance without having to remove the valve. Operating pressure range of 30 to 90 psi (2.1 to 6.2 bar). Made of heavy-duty stainless steel construction with a matte-silver powder-coated finish, and a satin finish stainless steel drain plate with customization options.
- Heavy-duty fabricated stainless steel with matte silver powder-coated finish
- Large-opening bottle filler with quick-fill 1 gpm flow rate
- Easy maintenance with front access to valve adjustment and cartridge replacement
- 100% lead-free waterways
Certified by CSA to NSF/ANSI 61, section 9 and NSF/ANSI 372; and was evaluated to be compliant to US and Canada Plumbing Codes including Uniform Plumbing Code (UPC), International Plumbing Code (IPC) and National Plumbing Code of Canada (NPC) by CSA. Complies with Prop 65.
3652 – Small Access Panel for 3600 Series PedestalsThe Haws model 3652 small access panel allows access to the internal components of the modular outdoor pedestal fountain/bottle filler. Panel is heavy-duty 3/16″ fabricated stainless steel with silver powder-coated finish provides exceptional corrosion resistance.
6468 – Drain Basin for 1920The Haws 6468 drip tray is used as a retrofit accessory for the Haws 1920 bottle filler. Easy mounting instructions allow the bottle filling station to work with this tray and bracket drain. Made of 304 stainless steel, this tray can be paired with optional back panel model BP6 as a backer for added appeal.
1922 – Vandal-Resistant Wall Mounted Bottle Filler w/Drip Tray DrainModel 1922 vandal-resistant satin stainless steel bottle filler with drain uses a patented stainless steel push-button valve assembly allowing for front access stream adjustment as well as cartridge and strainer access. This wall mounted bottle filler offers the ‘only’ all stainless-steel valve body that is machined out of solid bar stock, is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer, and has front access to the water stream height adjustment for easy maintenance without having to remove the valve. The drip tray captures all unused water and is sent down the drain.
- Optional 3000 gallon water filter available (model 6480)
- Only stainless steel valve body that is machined out of solid bar stock
- Satin stainless steel finish
- Vandal resistant components include the button, drain and bottom plate
- Available steel wall mounting plate recommended
- 1 gpm (3.78 L) Laminar flow
- Maintenance is made easy with front access to valve adjustment and cartridge replacement
- If back panels are not required, order models 1920 and 6468
- This product requires a mounting plate; either the 6700 in-wall or the 6700R on-wall support plate. (See options below)
Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.
MTG.3600 – Installation aid for 3600 Series Pedestal FountainsThe Haws model MTG.3600 is a temporary mounting plate used to help set the 6″ (15.2 cm) mounting anchors, supplied with the pedestal, in the correct position when poring the concrete pad used for the 3600 series pedestal fountains. When set, the plate and its set bolts are removed and can be re-used if necessary for another fountain location. The set anchors allow the fountain to be easily and quickly installed.
3653 – Pet Fountain Button Relocation PlateModel 3653 button relocation plate allows users to relocate the activation button from the dog bowl option to a higher location on the fountain pedestal. Normal activation if my foot so this plate will allow users to activation the dog bowl by hand. To achieve this, the fountain valve is removed on site from the dog bowl and remounted onto the plate. This plate is mounted in one of two upper plate positions. If two fountain arms are already in use, replace large access panel with the 3653 and two 3651 plates (if this installation is used, the fountain valve from the side the dog bowl is used on should be mounted for side wheel chair approach – contact customer service for more details).
