Hydration Archives

6466 – Waste Strainer

Model 6466 is a polished chrome-plated vandal-resistant waste strainer and tailpiece assembly. Vandal-resistant screw allows for dis-assembly from top for easy cleaning of drain. 1-1/4″ O.D. (3.2 cm) slip joint tailpiece.

6469 – Strainer, 1920 Drip Tray

The Haws 6469 drip tray is used as a retrofit accessory for the Haws 1920 bottle filler when mounting it over the Haws 1109 style of drinking fountains. Easy mounting instructions allow this tray to quickly convert the 1109 series to a bottle filling station. Made of 304 stainless steel, the upper portion can be easily removed, allowing the unit to be cleaned.

6470 – Surface-Mount Bottle Filler Drain Kit

The Haws model 6470 drain kit allows the 2000SMS to be plumbed to a waste outlet. Drain kit includes waste strainer and 1-1/4″ OD (3.2 cm) tailpiece and all accompanying washers/nuts to attach strainer to tailpiece. A trap will not be included. Current design of the drain trays allows for pop-out of drain kit assembly.

6472 – Hydration By Haws™ Drain Pan

Model 6472, Surface Mount Hydration By Haws™ replacement drain pan assembly.

6475 – Custom Logo Panel

The Model 6475 Hydration By Haws’ logo panel attaches to any Haws dual stainless steel fountain, fountain/bottle filler combination that utilizes a back panel. Customize your new or existing drinking fountain or bottle filler with your logo, slogan, or a graphic (examples shown)! Increase brand recognition by personalizing your hydration products with an easily retrofit-table custom back panel (call 888-640-4297 for details).

For customized ideas and format guidelines View custom logo brochure
Easily mounted with strong, moisture-resistant adhesive backing
Panel dimensions: 10″ x 4.25″
Template provided for level installation

5851LF – Faucet Valve

Model 5851LF is a panel mounted valve, self-closing, polished, chrome-plated, vandal-resistant lever handle with rough brass body. Dimensions: wall thickness maximum, 1″ (2.5 cm); size of hole required, 1-1/16″ diameter (2.7 cm). 3/8″ NPT(F) inlet and outlet. Replaces Models 5855 and 5856.

Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and NSF/ANSI/CAN 61: Q ≤ 0.5.

5851LFHST – Valve Handle

Model 5851LFHST is a handle and stem assembly for the 5851LF valve and shall include a polished chrome-plated brass handle and handle cap, is assembled complete with all supporting parts, and is ready to install on valves 2005 and newer. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006).

5867 – Pressure Regulator

Model 5867 fountain regulator is a lead-free plastic pressure regulator currently used on all Haws HO hands-off sensor-operated electric drinking fountains. It will maintain a constant stream height with line pressures that vary from 45 – 90 PSI (3.1 – 6.2 bar), and has 1/4″ NPT inlet and outlet.

5874PB – Fountain Valve

The Haws 5874PB valve uses a patented stainless steel, push-button activated, valve assembly allowing for front access stream adjustment as well as cartridge and strainer access. Valve and push button come equipped with automatic pressure regulation to allow the valve to function under varying water pressures between 30 – 90 psi (2.1 – 6.2 bar); keeping the stream constant throughout the drinking process. Connection is 1/4″ NPT inlet and outlet. Note: Valve assembly includes: push button assembly, tubing, and spanner wrench. Assembly has been used on most Haws fountains with a recessed valve mount produced after October 3, 2003. Unit replaced Model 5872

5874PBF – Fountain valve

The model 5874PBF uses a patented stainless steel, push-button activated, valve assembly allowing for front access stream adjustment as well as cartridge and strainer access. Valve and push button come equipped with automatic pressure regulation to allow the valve to function under varying water pressures between 30 – 90 psi (2.1 – 6.2 bar); keeping the stream constant throughout the drinking process. Connection is 1/4″ NPT inlet and outlet. Note: Valve assembly includes: push button assembly, tubing, and spanner wrench. Assembly has been used on most Haws fountains with a flush mount valve produced after October 3, 2003. Unit replaced Model 5872

5876 – Valve, Solenoid for Haws Electric Water Cooler

The Haws 5876 electronic push button activated solenoid valve is used with the Haws 1200 series water coolers. 120VAC

5881 – Air Control Valve

Model 5881 fountain valve is a push-button activated lead-free air valve used on all freeze-resistant drinking fountains. It is diaphragm controlled, supplied with an in-line mesh Y-strainer, and 1/2″ NPT inlet and outlet. Note: Push button assembly and flow control not included.

Your Feedback Matters!