The Haws 3150FR vandal-resistant outdoor barrier-free concrete pedestal fountain incorporates a freeze-resistant valve assembly to provide year round operation. Fully engineered pneumatic valve assembly is one of the best in freeze-resistant technologies. The “Hi-Lo” adult or child barrier free design of the 3150FR allows the square pedestal to be placed securely in multiple locations, all while providing for twice the users as regular drinking fountains. Equipped with vandal resistant components, this fountain is not easily disrupted, quickly discouraging the worst of vandals.

• Adjustable design allows the arm to be mounted at adult or child height as required by ADA
• Vandal resistant components include the bubblers, buttons, drains and bottom/access plates
• Concrete with exposed aggregate finish and wire to reinforce the casting offers an extremely solid and highly protected fountain
• Hood extension protects the bubbler head with a partial enclosure, for a greater protected drinking point
• Simplistic Portland Gray cement creates just the right amount of appeal for an outdoor fountain
• Consult with the local authority having jurisdiction before installation in order to determine if any additional regulations or requirements may apply
• Concrete Color Options

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.

The Haws 3300 outdoor vandal-resistant powder-coated pedestal drinking fountain incorporates a patented push-button stainless steel valve assembly allowing for front access stream adjustment as well as cartridge and strainer access. This pedestal mounted fountain offers the ‘only’ all stainless-steel valve body that is machined out of solid bar stock, is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer, and has front access to the water stream height adjustment for easy maintenance without having to remove the valve. The “Hi-Lo” barrier free design of the 3300 allows the square pedestal to be placed securely in multiple locations, all while providing for twice the users as regular drinking fountains. Equipped with vandal resistant components, this fountain is not easily disrupted, quickly discouraging the worst of vandals.

• Only stainless steel valve body that is machined out of solid bar stock
• Heavy-duty 11 gauge fabricated galvanized steel with green powder-coated finish provides exceptional corrosion resistance in one of the toughest made fountains Haws produces
• Vandal resistant components include the bubbler, button, drain and bottom/access plates
• Easy maintenance with front access to valve adjustment and cartridge replacement
• 100% lead-free waterways

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.

The Haws 3300FR vandal-resistant outdoor freeze-resistant powder-coated pedestal drinking fountain incorporates a freeze-resistant valve assembly to provide year round operation. Fully engineered pneumatic valve assembly is one of the best in freeze-resistant technologies. The “Hi-Lo” barrier free design of the 3300FR allows the square pedestal to be placed securely in multiple locations, all while providing for twice the users as regular drinking fountains. Equipped with vandal resistant components, this fountain is not easily disrupted, quickly discouraging the worst of vandals.

• Heavy-duty 11 gauge fabricated galvanized steel with green powder-coated finish provides exceptional corrosion resistance in one of the toughest made fountains Haws produces
• Vandal resistant components include the bubbler, button, drain, and bottom/access plates
• Consult with the local authority having jurisdiction before installation in order to determine if any additional regulations or requirements may apply

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.

The Haws 1119FR barrier-free Hi-Lo vandal-resistant drinking fountain uses a fully engineered pneumatic operated freeze-resistant valve assembly. Wall mounted design allows the 1119FR to be placed securely in multiple locations without taking up excess space. Equipped with vandal resistant components, this fountain is not easily disrupted, quickly discouraging vandals.

• 18 gauge Type 304 Stainless Steel design provides a well constructed sturdy fountain
• Vandal resistant components include the bubblers, buttons, drains and bottom plates
• Beautiful satin finish resists stains and corrosion
• Soft rounded corners prevent mishaps and other accidents that may occur once the fountain is installed
• “Hi-Lo” design allows for twice the users as regular fountains and suits the needs for various user heights
• One-piece stamped bowls make for an aesthetically pleasing and durable design

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains and electric water coolers to be lead-free by all known definitions including NSF/ANSI Standard 61, Section 9, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006).

The Haws 1201S wall mount indoor water cooler is the newest addition to the most comprehensive hydration offering in the industry. The modern, innovative design is tailored to meld with office spaces, universities and airports, or serve the functional needs of spaces like a school gymnasium. The electronic push bar activated solenoid valve provides easy activation, and the pressure-regulating bubbler with a flexible antimicrobial rubber mouth guard requires no adjusting.

• Flexible bubbler mouth guard to protect against injury
• Self-regulating flow – no need to adjust to varying incoming water pressures
• Anti-rotational screwed-in-place bubbler head
• Energy-Efficient Refrigeration Evaporator: Enhanced tankless evaporator coil using thermal mass cooling technology, with 100 percent water content flushed with every use.
• Durable, easy to clean 304 stainless steel skin
• Retrofit installation compatibility over many existing water coolers
• 100% lead free waterways
• Unique basin design reduces water splashing and simplifies cleaning
• Galvanized steel frame
• Rated for indoor use
• Designed and assembled in the USA

CSA certified to comply with NSF/ANSI/CAN 61: Q ≤ 1, NSF/ANSI/CAN 372, ASME A112.18.1/CSA B125.1, UL 399 and CSA C22.2 No. 120. ADA compliant to ICC A117.1, CSA B651, DOJ’s 2010 ADA Standards for Accessible Design when properly installed. ASHRAE 18 compliant chilling capacity of 8.0 gallon per hour of 50 degree drinking water, based on 80 degree inlet water and 90 degree ambient temperature.

Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine), and failure to heed these conditions may void warranty.

The Haws 1201SF wall mount filtered water cooler is the newest addition to the most comprehensive hydration offering in the industry. The modern, innovative design is tailored to meld with office spaces, universities and airports, or serve the functional needs of spaces like a school gymnasium. The electronic push bar activated solenoid valve provides easy activation, and the pressure-regulating bubbler with a flexible antimicrobial rubber mouth guard requires no adjusting. Fresh, always filtered water with the Electronic Lifecycle Control feature shuts water flow off when filter reaches its gallons capacity. Flow will begin again when filter is replaced.

• Flexible bubbler mouth guard to protect against injury
• Self-regulating flow – no need to adjust to varying incoming water pressures
• Anti-rotational screwed-in-place bubbler head
• Smart energy saving feature powers down cooler during periods of non-use; great for evenings and weekends
• High traffic area ready with a 3000-gallon (11,356 L) capacity filter
• Energy-Efficient Refrigeration Evaporator: Enhanced tankless evaporator coil using thermal mass cooling technology, with 100 percent water content flushed with every use.
• Durable, easy to clean 304 stainless steel skin
• Retrofit installation compatibility over many existing water coolers
• 100% lead free waterways
• Unique basin design reduces water splashing and simplifies cleaning
• Galvanized steel frame
• Rated for indoor use
• Designed and assembled in the USA

CSA certified to comply with NSF/ANSI 42, NSF/ANSI 53, NSF/ANSI/CAN 61: Q ≤ 1, NSF/ANSI/CAN 372, ASME A112.18.1/CSA B125.1, UL 399 and CSA C22.2 No. 120. ADA compliant to ICC A117.1, CSA B651, DOJ s 2010 ADA Standards for Accessible Design when properly installed. ASHRAE 18 compliant chilling capacity of 8.0 gallon per hour of 50 degree drinking water, based on 80 degree inlet water and 90 degree ambient temperature. FCC ID: 2AUAN-1200SF and IC: 25959-1200SF.

Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine), and failure to heed these conditions may void warranty.

The Haws 1202S wall mount Hi-Lo water cooler is the newest addition to the most comprehensive hydration offering in the industry. The modern, innovative design is tailored to meld with office spaces, universities and airports, or serve the functional needs of spaces like a school gymnasium. The Hi-Lo dual station design allows for standard left-side high/right-side low ADA fountain access. The electronic push bar activated solenoid valves provide easy activation, and pressure-regulating bubblers with flexible antimicrobial rubber mouth guards require no adjusting.

• Flexible bubbler mouth guard to protect against injury
• Self-regulating flow – no need to adjust to varying incoming water pressures
• Anti-rotational screwed-in-place bubbler head
• Energy-Efficient Refrigeration Evaporator: Enhanced tankless evaporator coil using thermal mass cooling technology, with 100 percent water content flushed with every use
• Durable, easy to clean 304 stainless steel skin
• Retrofit installation compatibility over many existing water coolers
• 100% lead free waterways
• Unique basin design reduces water splashing and simplifies cleaning
• Galvanized steel frame
• Rated for indoor use
• Designed and assembled in the USA

CSA certified to comply with NSF/ANSI/CAN 61: Q ≤ 1, NSF/ANSI/CAN 372, ASME A112.18.1/CSA B125.1, UL 399 and CSA C22.2 No. 120. ADA compliant to ICC A117.1, CSA B651, DOJ’s 2010 ADA Standards for Accessible Design when properly installed. ASHRAE 18 compliant chilling capacity of 8.0 gallon per hour of 50 degree drinking water, based on 80 degree inlet water and 90 degree ambient temperature.

Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine), and failure to heed these conditions may void warranty.

The Haws 1202SF wall-mount filtered Hi-Lo water cooler is the newest addition to the most comprehensive hydration offering in the industry. The modern, innovative design is tailored to meld with office spaces, universities and airports, or serve the functional needs of spaces like a school gymnasium. The Hi-Lo dual station design allows for standard left-side high/right-side low ADA fountain access. The electronic push bar activated solenoid valve provides easy activation, and the pressure-regulating bubbler with a flexible antimicrobial rubber mouth guard requires no adjusting. Fresh, always filtered water with the Electronic Lifecycle Control feature shuts water flow off when filter reaches its gallons capacity. Flow will begin again when filter is replaced.

• Flexible bubbler mouth guard to protect against injury
• Self-regulating flow – no need to adjust to varying incoming water pressures
• Anti-rotational screwed-in-place bubbler head
• Energy-Efficient Refrigeration Evaporator: Enhanced tankless evaporator coil using thermal mass cooling technology, with 100 percent water content flushed with every use
• Smart energy savings feature powers down refrigeration system after 2 hours of non-use and the lights are shut off, and will automatically start again when used or light is restored to normal
• High traffic area ready with a 3000-gallon (11,356 L) capacity filter
• Retrofit installation compatibility over many existing water coolers
• 100% lead free waterways
• Unique basin design reduces water splashing and simplifies cleaning
• Durable, easy to clean 304 stainless steel skin
• Galvanized steel frame
• Rated for indoor use
• Designed and assembled in the USA

CSA certified to comply with NSF/ANSI 42, NSF/ANSI 53, NSF/ANSI/CAN 61: Q ≤ 1, NSF/ANSI/CAN 372, ASME A112.18.1/CSA B125.1, UL 399 and CSA C22.2 No. 120. ADA compliant to ICC A117.1, CSA B651, DOJ s 2010 ADA Standards for Accessible Design when properly installed. ASHRAE 18 compliant chilling capacity of 8.0 gallon per hour of 50 degree drinking water, based on 80 degree inlet water and 90 degree ambient temperature. FCC ID: 2AUAN-1200SF and IC: 25959-1200SF.

Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine), and failure to heed these conditions may void warranty.

The Haws 1211S wall-mount ADA water fountain with bottle filler is the newest addition to the most comprehensive hydration offering in the industry. The modern, innovative design is tailored to meld with office spaces, universities and airports, or serve the functional needs of spaces like a school gymnasium. The electronic push bar activated solenoid valve provides easy activation, and the pressure-regulating bubbler with a flexible antimicrobial rubber mouth guard requires no adjusting. Sensor activated bottle filler allows for hands free operation, and intuitive LED electronic display keeps the user informed with how many plastic bottles have been saved.

• Flexible bubbler mouth guard to protect against injury
• Self-regulating bubbler flow – no need to adjust to varying incoming water pressures
• Anti-rotational screwed-in-place bubbler head
• Energy-Efficient Refrigeration Evaporator: Enhanced tankless evaporator coil using thermal mass cooling technology, with 100 percent water content flushed with every use
• Hands-free sensor operated bottle filler
• Vandal-resistant sensor resists scratching and water droplet fowling
• Auto purge feature automatically cycles once every 24 hours to assure a fresh water supply as well as trap integrity
• LED illuminated bottle fill area
• Quick 1.1 GPM fill rate (depending on incoming pressure) for water bottle fill station
• Smart energy savings feature powers down refrigeration system after 2 hours of non-use and the lights are shut off, and will automatically start again when used or light is restored to normal
• Programmable to be shut-down during planned facility closures, weekends, etc.
• Durable, easy to clean water fountian with bottle filler with a 304 stainless steel skin
• Retrofit installation compatibility over many existing water coolers
• 100% lead free waterways
• Unique basin design reduces water splashing and simplifies cleaning
• Galvanized steel frame
• Rated for indoor use
• Designed and assembled in the USA

CSA certified to comply with NSF/ANSI/CAN 61: Q ≤ 1, NSF/ANSI/CAN 372, ASME A112.18.1/CSA B125.1, UL 399 and CSA C22.2 No. 120. ADA compliant to ICC A117.1, CSA B651, DOJ’s 2010 ADA Standards for Accessible Design when properly installed. ASHRAE 18 compliant chilling capacity of 8.0 gallon per hour of 50 degree drinking water, based on 80 degree inlet water and 90 degree ambient temperature. FCC and CAN ICES – 3(A)/NMB-3(A).

Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine), and failure to heed these conditions may void warranty.

The Haws 1211SF wall-mount filtered ADA water cooler with bottle filler is the newest addition to the most comprehensive hydration offering in the industry. The modern, innovative design is tailored to meld with office spaces, universities and airports, or serve the functional needs of spaces like a school gymnasium. The electronic push bar activated solenoid valve provides easy activation, and the pressure-regulating bubbler with a flexible antimicrobial rubber mouth guard requires no adjusting. Sensor activated bottle filler allows for hands free operation, and intuitive LED electronic display keeps the user informed when the water is being filtered and how many plastic bottles have been saved. Fresh, always filtered water with the Electronic Lifecycle Control feature shuts water flow off when filter reaches its gallons capacity. Flow will begin again when filter is replaced.

• Flexible bubbler mouth guard to protect against injury
• Self-regulating bubbler flow – no need to adjust to varying incoming water pressures
• Anti-rotational screwed-in-place bubbler head
• Instantaneous tankless water cooler for consistent cool water during use of unit
• Hands-free sensor operated bottle filler
• Vandal-resistant sensor resists scratching and water droplet fowling
• Auto purge feature automatically cycles once every 24 hours to assure a fresh water supply as well as trap integrity
• LED illuminated bottle fill area
• Quick 1.1 GPM fill rate (depending on incoming pressure) for bottle filler
• Smart energy savings feature powers down refrigeration system after 2 hours of non-use and the lights are shut off, and will automatically start again when used
• Programmable to be shut-down during planned facility closures, weekends, etc.
• High traffic area ready with a 3000-gallon (11,356 L) capacity filter
• Durable, easy to clean 304 stainless steel skin
• Retrofit installation compatibility over many existing water coolers
• 100% lead free waterways
• Unique basin design reduces water splashing and simplifies cleaning
• Galvanized steel frame
• Rated for indoor use
• Designed and assembled in the USA

CSA certified to comply with NSF/ANSI 42, NSF/ANSI 53, NSF/ANSI/CAN 61: Q ≤ 1, NSF/ANSI/CAN 372, ASME A112.18.1/CSA B125.1, ASME112.19.3/CSA B45.4, UL 399 and CSA C22.2 No. 120. ADA compliant to ICC A117.1, CSA B651, DOJ s 2010 ADA Standards for Accessible Design when properly installed. ASHRAE 18 compliant chilling capacity of 8.0 gallon per hour of 50 degree drinking water, based on 80 degree inlet water and 90 degree ambient temperature. FCC ID: 2AUAN-1200SF and IC: 25959-1200SF.

Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine), and failure to heed these conditions may void warranty.

The Haws 1212S wall-mount Hi-Lo ADA water cooler with bottle filler is the newest addition to the most comprehensive hydration offering in the industry. The modern, innovative design is tailored to meld with office spaces, universities and airports, or serve the functional needs of spaces like a school gymnasium. The Hi-Lo dual station design allows for standard left-side high/right-side low ADA fountain access. The electronic push bar activated solenoid valves provide easy activation, and pressure-regulating bubblers with flexible antimicrobial rubber mouth guards requires no adjusting. Sensor activated bottle filler allows for hands free operation, and intuitive LED electronic display keeps the user informed with how many plastic bottles have been saved.

• Flexible bubbler mouth guard to protect against injury
• Self-regulating bubbler flow – no need to adjust to varying incoming water pressures
• Anti-rotational screwed-in-place bubbler head
• Energy-Efficient Refrigeration Evaporator: Enhanced tankless evaporator coil using thermal mass cooling technology, with 100 percent water content flushed with every use
• Hands-free sensor operated bottle filler
• Vandal-resistant sensor resists scratching and water droplet fowling
• LED illuminated bottle fill area
• Quick 1.1 GPM fill rate (depending on incoming pressure) for bottle filler
• Auto purge feature automatically cycles once every 24 hours to assure a fresh water supply as well as trap integrity
• Smart energy savings feature powers down refrigeration system after 2 hours of non-use and the lights are shut off, and will automatically start again when used or lights are restored to normal
• Programmable to be shut-down during planned facility closures, weekends, etc.
• Durable, easy to clean 304 stainless steel skin
• Retrofit installation compatibility over many existing water coolers
• 100% lead free waterways
• Unique basin design reduces water splashing and simplifies cleaning
• Galvanized steel frame
• Rated for indoor use
• Designed and assembled in the USA

CSA certified to comply with NSF/ANSI/CAN 61: Q ≤ 1, NSF/ANSI/CAN 372, ASME A112.18.1/CSA B125.1, UL 399 and CSA C22.2 No. 120. ADA compliant to ICC A117.1, CSA B651, DOJ’s 2010 ADA Standards for Accessible Design when properly installed. ASHRAE 18 compliant chilling capacity of 8.0 gallon per hour of 50 degree drinking water, based on 80 degree inlet water and 90 degree ambient temperature. FCC and CAN ICES – 3(A)/NMB-3(A).

Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine), and failure to heed these conditions may void warranty.

The Haws 1212SF wall-mount Hi-Lo ADA water cooler with water bottle filling station is the newest addition to the most comprehensive hydration offering in the industry. The modern, innovative design is tailored to meld with office spaces, universities and airports, or serve the functional needs of spaces like a school gymnasium. The Hi-Lo dual station design allows for standard left-side high/right-side low ADA fountain access. The electronic push bar activated solenoid valves provide easy activation, and the pressure-regulating bubblers with a flexible antimicrobial rubber mouth guards requires no adjusting. Sensor activated bottle filler allows for hands free operation, and intuitive LED electronic display keeps the user informed when the water is being filtered and how many plastic bottles have been saved. Fresh, always filtered water with the Electronic Lifecycle Control feature shuts water flow off when filter reaches its gallons capacity. Flow will begin again when filter is replaced.

• Flexible bubbler mouth guard to protect against injury
• Self-regulating bubbler flow – no need to adjust to varying incoming water pressures
• Anti-rotational screwed-in-place bubbler head
• Energy-Efficient Refrigeration Evaporator: Enhanced tankless evaporator coil using thermal mass cooling technology, with 100 percent water content flushed with every use
• Hands-free sensor operated bottle filler
• Vandal-resistant sensor resists scratching and water droplet fowling
• Auto purge feature automatically cycles once every 24 hours to assure a fresh water supply as well as trap integrity
• LED illuminated bottle fill area
• Quick 1.1 GPM fill rate (depending on incoming pressure) for water bottle filling station
• Smart energy savings feature powers down refrigeration system after 2 hours of non-use and the lights are shut off, and will automatically start again when used or light is restored to normal
• Programmable to be shut-down during planned facility closures, weekends, etc.
• High traffic area ready with a 3000-gallon (11,356 L) capacity filter
• Durable, easy to clean 304 Stainless Steel skin
• Retrofit installation compatibility over many existing water coolers
• 100% lead free waterways
• Unique basin design reduces water splashing and simplifies cleaning
• Galvanized steel frame
• Rated for indoor use
• Designed and assembled in the USA

CSA certified to comply with NSF/ANSI 42, NSF/ANSI 53, NSF/ANSI/CAN 61: Q ≤ 1, NSF/ANSI/CAN 372, ASME A112.18.1/CSA B125.1, UL 399 and CSA C22.2 No. 120. ADA compliant to ICC A117.1, CSA B651, DOJ s 2010 ADA Standards for Accessible Design when properly installed. ASHRAE 18 compliant chilling capacity of 8.0 gallon per hour of 50 degree drinking water, based on 80 degree inlet water and 90 degree ambient temperature. FCC ID: 2AUAN-1200SF and IC: 25959-1200SF.

Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine), and failure to heed these conditions may void warranty.

Trouble viewing this website?

Without an up-to-date browser, you may have trouble with some of our features.

Update Now

Edge

Firefox

Chrome