Model 1107.8P ADA vandal-resistant electric water cooler and bottle filler provides 8 gph (30.3 L) chilled water performance in an engineered stainless steel skin. This wall-mounted low profile bowl designed fountain offers the only all stainless-steel valve body that is machined out of solid bar stock, is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer, and has front access to the water stream height adjustment for easy maintenance without having to remove the valve.

• Optional 3000 gallon water filter available (model 6480)
• Only stainless steel valve body that is machined out of solid bar stock
• 100% Lead free waterways.
• Vandal resistant components include the bubbler, buttons, drain and bottom plates
• 14-gauge Type 304 Stainless Steel construction and required specialized mounting frame offer a well constructed sturdy fountain
• Maintenance is made easy with front access to valve adjustment and cartridge replacement
• Grille slots are designed to eliminate sharp edges and are backed with a foam filter to protect the fan motor and high displacement compressor from debris
• 1 gpm (3.78 L) bottle filler laminar flow
• Designed to run at a low energy usage, this water cooler is assured to have a long-lasting life
• One piece rectangular bowl is designed for extra durability and maintenance ease
• Beautiful satin finish resists stains and corrosion

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.

Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.

Product Includes: 

• 1107.8: Fountain
• HCR8: Remote Chiller
• 1920: Bottle Filler
• BP3: Fountain Back Panel
• BP15: Bottle Filler Back Panel
• 6700: In-Wall Mounting Plate
• MTGFR.7: Mounting Frame

The Haws 1001MSP stainless-steel ADA vandal-resistant drinking fountain and bottle filler uses patented stainless steel push-button valve assemblies allowing for front access stream adjustment as well as cartridge and strainer access. Wall mounted MS (mounting system) allows for front access of plumbing. This swirl bowl designed fountain offers the ‘only’ all stainless-steel valve body that is machined out of solid bar stock, is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer, and has front access to the water stream height adjustment for easy maintenance without having to remove the valve.

• Optional 3000 gallon water filter available (model 6480)
• Only stainless steel valve body that is machined out of solid bar stock
• 18 gauge Type 304 Stainless Steel bowl assembly mounted on a 14 gauge Type 304 Stainless Steel wall bracket
• Vandal resistant components include bubbler, bowl, button, drain and bottom plate
• 1 gpm (3.78 L) bottle filler laminar flow.
• 100% lead-free waterways
• Front access plate allows for front access of P-trap and stop
• Polished chrome-plated brass bubbler head with integral laminar anti-squirt flow eliminate water splash
• Easy maintenance with front access to valve adjustment and cartridge replacement

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.

The Haws 1001P barrier-free vandal-resistant drinking fountain and bottle filler uses patented stainless steel push-button valve assemblies allowing for front access stream adjustment as well as cartridge and strainer access. This wall mounted  fountain/bottle filler offers the ‘only’ all stainless-steel valve body that is machined out of solid bar stock, is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer, and has front access to the water stream height adjustment for easy maintenance without having to remove the valve.

• Optional 3000 gallon water filter available (model 6480)
• Only stainless steel valve body that is machined out of solid bar stock
• 18 gauge Type 304 Stainless Steel bowl assembly mounted on a 14 gauge Type 304 Stainless Steel wall bracket and bottle filler
• Vandal resistant components include the bubbler, bowl, buttons, drain and bottom plates
• 100% lead-free waterways
• 1 gpm (3.78 L) bottle filler laminar flow
• Trap and shut off must be in the wall
• Polished chrome-plated brass bubbler head with integral laminar anti-squirt flow eliminate water splash
• Easy maintenance with front access to valve adjustment and cartridge replacement

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.

The Haws 1210SF wall-mount filtered ADA bottle filling station is the newest addition to the most comprehensive hydration offering in the industry. The modern, innovative design is tailored to meld with office spaces, universities and airports, or serve the functional needs of spaces like a school gymnasium. Sensor activated bottle filler allows for hands free operation, and intuitive LED electronic display keeps the user informed with how many plastic bottles have been saved. Fresh, always filtered water with the Electronic Lifecycle Control feature shuts water flow off when filter reaches its gallons capacity. Flow will begin again when filter is replaced.

• Energy-Efficient Refrigeration Evaporator: Enhanced tankless evaporator coil using thermal mass cooling technology, with 100 percent water content flushed with every use
• Hygienic hands-free sensor operated bottle filler with vandal-resistant sensor that resists scratching and water droplet fowling
• Auto-purge feature automatically cycles once every 24 hours to assure a fresh water supply as well as trap integrity
• LED illuminated bottle fill area
• Quick 1.1 GPM fill rate (depending on incoming pressure) for bottle filler
• Smart energy savings feature powers down refrigeration system after 2 hours of non-use, and will automatically start again when used
• Programmable to be shut-down during planned facility closures, weekends, etc.
• High traffic area ready with a 3000-gallon (11,356 L) capacity filter
• Raised platform for easy bottle resting and filling
• Durable, easy to clean 304 stainless-steel skin
• Retrofit installation compatibility over many existing water coolers
• 100% lead free waterways
• Galvanized steel frame
• Rated for indoor use
• Designed and assembled in the USA

CSA certified to comply with NSF/ANSI 42, NSF/ANSI 53, NSF/ANSI/CAN 61: Q ≤ 1, NSF/ANSI/CAN 372, ASME A112.18.1/CSA B125.1, UL 399 and CSA C22.2 No. 120. ADA compliant to ICC A117.1, CSA B651, DOJ’s 2010 ADA Standards for Accessible Design when properly installed. ASHRAE 18 compliant chilling capacity. FCC ID: 2AUAN-1200SM and IC: 25359-1200SM

Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine), and failure to heed these conditions may void warranty.

The Haws 1210S indoor wall-mount ADA bottle filler is the newest addition to the most comprehensive hydration offering in the industry. The modern, innovative design is tailored to meld with office spaces, universities and airports, or serve the functional needs of spaces like a school gymnasium. Sensor-activated bottle filler allows for hands-free operation, and intuitive LED electronic display keeps the user informed with how many plastic bottles have been saved.

• Energy-Efficient Refrigeration Evaporator: Enhanced tankless evaporator coil using thermal mass cooling technology, with 100 percent water content flushed with every use
• Hygienic hands-free sensor operated bottle filler with vandal-resistant sensor that resists scratching and water droplet fowling
• Auto purge feature automatically cycles once every 24 hours to assure a fresh water supply as well as trap integrity
• LED illuminated bottle fill area
• Quick 1.1 GPM fill rate (depending on incoming pressure) for bottle filler
• Smart energy savings feature powers down refrigeration system after two hours of non-use, and will automatically start again when used
• Programmable to be shut-down during planned facility closures, weekends, etc.
• Raised platform for easy bottle resting and filling
• Durable, easy-to-clean 304 stainless-steel skin
• Retrofit installation compatibility over many existing competitor water coolers
• 100% lead free waterways
• Galvanized steel frame
• Rated for indoor use
• Designed and assembled in the USA

CSA certified to comply with NSF/ANSI/CAN 61: Q ≤ 1, NSF/ANSI/CAN 372, ASME A112.18.1/CSA B125.1, UL 399 and CSA C22.2 No. 120. ADA compliant to ICC A117.1, CSA B651, DOJ’s 2010 ADA Standards for Accessible Design when properly installed. ASHRAE 18 compliant chilling capacity. FCC and CAN ICES – 3(A)/NMB-3(A).

Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine), and failure to heed these conditions may void warranty.

Model 1922 vandal-resistant satin stainless steel bottle filler with drain uses a patented stainless steel push-button valve assembly allowing for front access stream adjustment as well as cartridge and strainer access. This wall mounted bottle filler offers the ‘only’ all stainless-steel valve body that is machined out of solid bar stock, is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer, and has front access to the water stream height adjustment for easy maintenance without having to remove the valve. The drip tray captures all unused water and is sent down the drain.

• Optional 3000 gallon water filter available (model 6480)
• Only stainless steel valve body that is machined out of solid bar stock
• Satin stainless steel finish
• Vandal resistant components include the button, drain and bottom plate
• Available steel wall mounting plate recommended
• 1 gpm (3.78 L) Laminar flow
• Maintenance is made easy with front access to valve adjustment and cartridge replacement
• If back panels are not required, order models 1920 and 6468
• This product requires a mounting plate; either the 6700 in-wall or the 6700R on-wall support plate. (See options below)

Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.

The Haws 1211SH wall-mount ADA touchless water cooler with bottle filler is the newest addition to the most comprehensive hydration offering in the industry. The modern, innovative design is tailored to meld with office spaces, universities and airports, or serve the functional needs of spaces like a school gymnasium. The sensor operated solenoid valve provides hands-free hygienic operation, and the pressure-regulating bubbler with a flexible antimicrobial rubber mouth guard requires no adjusting. Sensor activated bottle filler allows for hands free operation, and intuitive LED electronic display keeps the user informed with how many plastic bottles have been saved.

• Touchless operation for safety and peace of mind
• Flexible bubbler mouth guard to protect against injury
• Self-regulating bubbler flow – no need to adjust to varying incoming water pressures
• Anti-rotational screwed-in-place bubbler head
• Energy-Efficient Refrigeration Evaporator: Enhanced tankless evaporator coil using thermal mass cooling technology, with 100 percent water content flushed with every use
• Hands-free sensor operated bottle filler
• Vandal-resistant sensor resists scratching and water droplet fowling
• Auto purge feature automatically cycles once every 24 hours to assure a fresh water supply as well as trap integrity
• LED illuminated bottle fill area
• Quick 1.1 GPM fill rate (depending on incoming pressure) for bottle filler
• Smart energy savings feature powers down refrigeration system after 2 hours of non-use and the lights are shut off, and will automatically start again when used or light is restored to normal
• Programmable to be shut-down during planned facility closures, weekends, etc.
• Durable, easy to clean 304 stainless steel skin
• Retrofit installation compatibility over many existing water coolers
• 100% lead free waterways
• Unique basin design reduces water splashing and simplifies cleaning
• Galvanized steel frame
• Rated for indoor use
• Designed and assembled in the USA

CSA certified to comply with NSF/ANSI/CAN 61: Q ≤ 1, NSF/ANSI/CAN 372, ASME A112.18.1/CSA B125.1, UL 399 and CSA C22.2 No. 120. ADA compliant to ICC A117.1, CSA B651, DOJ’s 2010 ADA Standards for Accessible Design when properly installed. ASHRAE 18 compliant chilling capacity of 8.0 gallon per hour of 50 degree drinking water, based on 80 degree inlet water and 90 degree ambient temperature. FCC and CAN ICES – 3(A)/NMB-3(A).

Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine), and failure to heed these conditions may void warranty.

Model TWBS.EWE, low-lead Emergency Valve (patent pending) thermostatically mixes hot and cold water to provide a safe fluid supply for emergency eyewash equipment. The valve contains a secondary high temperature limit valve to provide additional protection to the user in the event of main tempering valve malfunction. Additionally, to ensure a fail-safe water supply for emergency shower and eyewash stations, a series of cold water by-pass valves open in the event of hot water pressure loss. (No gauges supplied – ASSE 1071 standard recommends gauges be placed 5 to 8 feet (1.52 to 2.44 m) downstream for the most accurate temperature measurement.)

• Optional recessed or surface mounted valve box available
• A flow rate of 1 to 12 gpm (3.8 to 45.4 L) for better temperature control across the operating range
• AXION’s superior design and technology provide a complete safety solution for increased victim comfort
• Lowest internal pressure drop for this class of valve (advantage where supply pressure is low)
• Wax based thermostat technology for fast response time with proven highly reliable temperature control
• Highest Cold Water Bypass flow rate in the industry (83% of rated tepid flow rate)
• Low-lead brass valve design with internal check stops
• Over-sized valve seats resist failures caused by foreign matter
• A new and efficient shuttle design eliminates valve binding
• A custom funnel design improves temperature control at low flow rates
• Outlet temperature is factory set to 85° F (29° C)
• Tempered water: High temperature limit is factory set to 87°F (30° C)
• Cold water by-pass valves are closed during normal operation, regardless of flow rate
• For important installation information, please read Scald Warning.

Listings: CSA certified per ASSE 1071, ANSI Z358.1, applicable sections of CSA B125.3, NSF/ANSI 372, NSF/ANSI 61-section 8, California Health and Safety Code 116875 (AB 1953).

Model TWBS.HF, low-lead Emergency Valve (patent pending), thermostatically mixes hot and cold water to provide a safe fluid supply for emergency shower and eyewash equipment. The valve contains a secondary high temperature limit valve to provide additional protection to the user in the event of main tempering valve malfunction. Additionally, to ensure a fail-safe water supply for emergency shower and eyewash stations, a pressure sensing diverter valve is provided that sends a pressure signal to open the cold water by-pass valve in the event of hot water pressure loss, main valve thermostat malfunction, or clogged cold water check-stop. (No gauges supplied – ASSE 1071 standard recommends gauges be placed 5 to 8 feet (1.52 to 2.44 m) downstream for the most accurate temperature measurement.)

• Optional recessed or surface mounted valve box available
• A flow rate of 1 to 78 gpm (295 L) for better temperature control across the operating range
• AXION’s superior design and technology provide a complete safety solution for increased victim comfort
• Lowest internal pressure drop for this class of valve (advantage where supply pressure is low)
• Wax based thermostat technology for fast response time with proven highly reliable temperature control
• Highest Cold Water Bypass flow rate in the industry (100% of rated tepid flow rate)
• Low-lead brass valve design with internal check stops
• Over-sized valve seats resist failures caused by foreign matter
• A new and efficient shuttle design eliminates valve sticking
• A custom funnel design improves temperature control at low flow rates
• Outlet temperature is factory set to 85° F (29° C)
• Tempered water: High temperature limit is factory set to 87° F (30° C)
• Cold water by-pass valves are closed during normal operation, regardless of flow rate
• For important installation information, please read Scald Warning.

Listings: CSA certified per ASSE 1071, ANSI Z358.1, applicable sections of CSA B125.3, NSF/ANSI 372, NSF/ANSI 61-section 8, California Health and Safety Code 116875 (AB 1953).

Model TWBS.SHE, low-lead Emergency Valve (patent pending), thermostatically mixes hot and cold water to provide a safe fluid supply for emergency shower and eyewash equipment. The valve contains a secondary high temperature limit valve to provide additional protection to the user in the event of main tempering valve malfunction. Additionally, to ensure a fail-safe water supply for emergency shower and eyewash stations, a series of cold water by-pass valves open in the event of hot water pressure loss. (No gauges supplied – ASSE 1071 standard recommends gauges be placed 5 to 8 feet (1.52 to 2.44 m) downstream for the most accurate temperature measurement.)

• Optional recessed or surface mounted valve box available
• A flow rate of 1 to 74 gpm (280 L) for better temperature control across the operating range
• AXION’s superior design and technology provide a complete safety solution for increased victim comfort
• Lowest internal pressure drop for this class of valve (advantage where supply pressure is low)
• Wax based thermostat technology for fast response time with proven highly reliable temperature control
• Highest Cold Water Bypass flow rate in the industry (68% of rated tepid flow rate)
• Low-lead brass valve design with internal check stops
• Over-sized valve seats resist failures caused by foreign matter
• A new and efficient shuttle design eliminates valve binding
• A custom funnel design improves temperature control at low flow rates
• Outlet temperature is factory set to 85° F (29° C)
• Tempered water: High temperature limit is factory set to 87° F (30° C)
• Cold water by-pass valves are closed during normal operation, regardless of flow rate
• For important installation information, please read Scald Warning.

Listings: CSA certified per ASSE 1071, ANSI Z358.1, applicable sections of CSA B125.3, NSF/ANSI 372, NSF/ANSI 61-section 8, California Health and Safety Code 116875 (AB 1953).

Model 1001.8 barrier-free vandal-resistant electric water cooler provides 8 gph (30.3 L) chilled water performance in an engineered stainless steel skin. This wall-mounted swirl bowl designed fountain offers the only all stainless-steel valve body that is machined out of solid bar stock, is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer, and has front access to the water stream height adjustment for easy maintenance without having to remove the valve. Outfitted with such protective features as vandal-resistant bubbler head, waste strainer, and bottom plate, this electric water cooler is quick to discourage vandals.

• Optional 3000 gallon water filter available (model 6480)
• Only stainless steel valve body that is machined out of solid bar stock
• 18-gauge Type 304 Stainless Steel bowl assembly mounted on a 14-gauge Type 304 Stainless Steel wall bracket
• Vandal resistant components include the bubbler, bowl, button, drain and bottom plate
• 100% lead-free waterways
• Grille slots are designed to eliminate sharp edges and are backed with a foam filter to protect the fan motor and high displacement compressor from debris
• Maintenance is made easy with front access to valve adjustment and cartridge replacement
• Designed to run at a low energy usage, this water cooler is assured to have a long-lasting life
• Laminar flow prevents splashing, keeping the drinking area contained and clean
• Beautiful satin finish resists stains and corrosion

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.

Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.

Model 1119.8 barrier-free electric vandal-resistant drinking fountain provides 8 gph (30.3 L) chilled water performance in an engineered stainless steel skin, and uses patented stainless steel, push button activated, valve assemblies allowing for front access stream adjustment as well as cartridge and strainer access. This wall-mounted fountain offers the only all stainless-steel valve body that is machined out of solid bar stock, is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer, and has front access to the water stream height adjustment for easy maintenance without having to remove the valve.

• Optional 3000 gallon water filter available (model 6480)
• Only stainless steel valve body that is machined out of solid bar stock
• 100% lead-free waterways
• Vandal resistant components include the bubblers, buttons, drains and bottom plates
• 18-gauge Type 304 Stainless Steel construction and required specialized mounting frame offer a well constructed sturdy fountain
• Easy maintenance with front access to valve adjustment and cartridge replacement
• Grille slots are designed to eliminate sharp edges and are backed with a foam filter to protect the fan motor and high displacement compressor from debris
• Designed to run at a low energy usage, this water cooler is assured to have a long-lasting life
• One piece rectangular bowl is designed for extra durability and maintenance ease
• Beautiful satin finish resists stains and corrosion

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.

Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.

Trouble viewing this website?

Without an up-to-date browser, you may have trouble with some of our features.

Update Now

Edge

Firefox

Chrome