Fully Assembled Archives

7324 – AXION® MSR Wall Mount Eye/Face Wash

Haws 7324 features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain.

Unit is equipped with a pop-off dust cover, so when debris is present, the irrigation process stays protected
Easily detected and maintained, emergency equipment is equipped with safety sign and test card to record weekly testing
Reducing installation time, eye/face wash and valve assembly is pre-built and fully water/pressure tested
Floor drain is recommended for this unit
ANSI/ISEA Z358.1 tempering compliance options

Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment.

7360BTWC – AXION® MSR Barrier-Free Eye/Face Wash

The Haws 7360BTWC barrier-free emergency eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain. Unit is equipped with an in-line 50 x 50 mesh water strainer and flip top dust covers, so when debris is present, the irrigation process stays protected. Space efficient design allows the 7360BTWC to be mounted in a number of easily accessible locations while providing a barrier-free standard.

- Low profile design accommodates wheelchair access
- Eyewash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
- Reducing installation time, eye/face wash and valve assembly is pre-built and fully water/pressure tested. Unit also comes with trap and tailpiece to meet desired wall mounting requirements
- ANSI/ISEA Z358.1 tempering compliance options

Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment.

7460 – AXION® MSR Unmounted Eye/Face Wash

Model 7460 unmounted eye and face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain.

Eyewash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
Features a round 11″ (27.9 cm) stainless steel receptor
Includes a mesh in-line strainer to collect line debris, and ball valve with stainless steel ball and stem for durability
Supply: 1/2″ NPT. Waste: 1- 1/4″ NPT
ANSI Z358.1 tempering compliance options

Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.

7500 – Portable Gravity Fed Eyewash

Haws portable Model 7500 is ideal for remote locations. Using gravity to supply a continuous flow of clean water to injured personnel for a full 15 minutes at .4 gpm (1.5 L), this model is a reliable source for safety. Recognizing the 7500’s full patterned flushing feature, those working in remote areas can’t help but feel confident with this piece of emergency equipment day after day.

Featuring a FDA approved high-density green polyethylene tank easily activated by pulling the yellow activation arm down to the open position
A wide-fill opening with threaded cap permits easy inspection, cleaning and filling
Relocation is simple due to the easily mounted (bracket included) and light design of this 16 gallon (60.6 L) portable
Measurements: 22-1/2″ high, 21-1/2″ wide, 19-1/2″ deep (57.2 x 54.6 x 49.5 cm)

Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment.

7501 – Portable Gravity Fed Eyewash

The newly retooled Haws 7501 compact portable eyewash is a 9-gallon (34.1 L) capacity gravity operated portable eyewash that supplies a continuous flow of water for a full 15 minutes at .4 gpm. This unit is a cost-effective solution ideal for locations without access to potable water, including temporary decontamination sites, temporary treatment facilities, and short-term job sites.

Product enhancements include:

Featuring a FDA approved high-density green polyethylene tank that is easily activated by pulling the yellow activation arm down to the open position
A wide-fill opening with a securely threaded cap, and a pronounced ‘Max Fill’ line permits easy inspection, cleaning and filling
Relocation is simple due to ‘Lift Here’ graphics, easily mounted bracket (included) and light design of this 9-gallon (34.1 L) portable
Measurements: 14-1/2″ high, 22″ wide, 10-1/8″ (36.8 x 55.9 x 25.7 cm) deep. *Note: Unit must be wall hung

Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment. This is clearly called out on the exterior of the unit.

7501T – Tempered, Gravity-Fed, Portable Eyewash

The newly retooled Haws 7501T compact portable tempered eyewash ideal for remote locations. The 9-gallon (34 L), gravity-fed, eyewash uses a heated, insulated blanket to provide ANSI compliant tempered potable water in operating temperatures between -20° F (-30° C) and 100° F (38° C) for locations without access to a continuous potable water source. 120VAC, 60Hz, 1.38A electrical requirement with supplied 8′ power cord. This unit is a cost-effective solution ideal for locations without access to potable water, including temporary decontamination sites, temporary treatment facilities, and short-term job sites.

A wide-fill opening with a securely threaded cap, and a pronounced “Max Fill” line that permits easy inspection, cleaning and filling
FDA approved high-density green polyethylene tank that is easily activated by pulling the yellow activation arm down to the open position
Ease of relocation due to “Lift Here” graphics, easily mounted bracket (included) and light design
Measurements: 16″ high, 24″ wide, 12″ deep (36.8 x 55.9 x 25.7 cm). *Note: Unit must be wall hung

QPS-C-US-Certified-Electrical-Safety for NEMA/Type 3R in ordinary locations, and to ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment, which is clearly called out on the exterior of the unit.

3670 – Pet Fountain Attachment

The Haws 3670 heavy-duty dog bowl uses a patented push-button stainless steel valve assembly allowing for front access stream adjustment as well as cartridge and strainer access. Heavy-duty fabricated stainless steel with matte silver powder-coated finish.

Easy maintenance with front access to valve adjustment and cartridge replacement
100% lead-free waterways
Optional push button relocation plate positions activation of the dog bowl higher for easy hand operation.

Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and NSF/ANSI/CAN 61: Q ≤ 1.

3680 – Drinking Fountain Bowl Attachment For 3600 Series

The Haws 3680 heavy-duty drinking fountain attachment for the 3600 pedestal series uses a patented push-button stainless steel valve assembly allowing for front access stream adjustment as well as cartridge and strainer access. This silver powder-coated stainless steel fountain offers the ‘only’ all stainless-steel valve body that is machined out of solid bar stock, is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer, and has front access to the water stream height adjustment for easy maintenance without having to remove the valve.

Easy maintenance with front access to valve adjustment and cartridge replacement
Polished chrome-plated brass vandal-resistant shielded bubbler head
100% lead-free waterways

3690 – Bottle Filler Attachment

The Haws 3690 heavy-duty bottle filler for the 3600 pedestal series fountains uses a patented push-button stainless steel valve assembly allowing for front access stream adjustment as well as cartridge and strainer access. This pedestal mounted stainless steel bottle filler offers the ‘only’ all stainless-steel valve body that is machined out of solid bar stock, is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer, and has front access to the water stream height adjustment for easy maintenance without having to remove the valve. Made of heavy-duty fabricated stainless steel with silver powder-coated finish, and a satin finish stainless steel drain plate with customization options.

Large-opening bottle filler with quick-fill 1 gpm flow rate
Easy maintenance with front access to valve adjustment and cartridge replacement
Polished chrome-plated vandal-resistant waste strainer, and vandal-resistant access plate
100% lead-free waterways

4010 – Deck Fountain

Deck-mounted units like the 4010 are installed in accessible countertop locations for quick locating and convenient operation. Push button operated stainless steel bubbler valve with adjustable stream regulation make this fountain easily activated and maintained. Slope down stream guide minimizes splashing, keeping the surrounding area clean. Equipped with mounting bracket and waste strainer, this fountain is vandal resistant and easily placed.

Stainless steel construction offers a good amount of durability and corrosion resistance
100% lead-free waterways
Anti-squirt flow prevents surging water, keeping the drinking area contained and clean

3377BFFR – Vandal-Resistant Outdoor Bottle Filler Attachment

Haws 3377BFFR vandal-resistant bottle filler attachment for the 3377FR pedestal drinking fountain uses a freeze-resistant valve assembly to provide year round operation. Equipped with vandal resistant components, this fountain is not easily disrupted, quickly discouraging vandals. A 3/16″ (.47 cm) galvanized steel extension with green powder-coated finish provides exceptional corrosion resistance.

Vandal resistant components include the button and bottom/access plates

3377BFG – Outdoor Vandal-Resistant Bottle Filler Attachment

Haws 3377BFG vandal-resistant bottle filler attachment for the 3377G pedestal drinking fountain uses a patented stainless steel push-button valve assembly allowing for front access stream adjustment as well as cartridge and strainer access. This pedestal mounted bottle filler offers the ‘only’ all stainless-steel valve body that is machined out of solid bar stock, is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer, and has front access to the water stream height adjustment for easy maintenance without having to remove the valve.

Only stainless steel valve body that is machined out of solid bar stock
14 gauge bottle filler bracket, and 3/16″ (.47 cm) thick steel pedestal extension with rough unfinished galvanized surface provides an exceptional corrosion resistance
Vandal resistant components include the button and bottom/access plates
100% lead-free waterways
Maintenance is made easy with front access to valve adjustment and cartridge replacement
1 gpm (3.8 L) Laminar flow limits bottle filler from splashing, keeping the drinking area contained and clean

Your Feedback Matters!