Model 9070 Eye Wash Filter is recommended for installation on all eyewash units for additional protection for eyes. Made of FDA approved polypropylene with disposable FDA approved viscose fiber filter media which removes particles down to 20 microns. Flow Capacity: 7 gpm (26.5 L) max (recommended). Maximum Working Pressure: 125 psi (8.62 bar) Size: 15″ (38.1 cm) overall by 5″ (12.7 cm) diameter Supply: 3/4″ NPT inlet and outlet.

Brita^® Hydration Stations^® feature advanced filtration options to deliver great-tasting, filtered water using an NSF certified filtration system that reduces chlorine (taste / odor), lead, and removes 99.99% of cysts. Model 6441 is a 1,500 gallon capacity 1 micron coconut carbon block filter. Filter 6441 is for model 2500.CT, 2500.FS, and 2520 systems.

Model 6429 replacement filter is used on the Brita® Hydration Station®. It is a carbon block filter cartridge with a service life of 1 year/2,500 gallon (9463 L). Filter contains an onboard chip to store total gallon usage; this chip interfaces with an electronic Lifecycle Control system to allow water flow only until the filter reaches its total gallon capacity.

• Tested and certified by CSA against NSF/ANSI Standard 42 for the reduction of chlorine (taste and odor) and against NSF/ANSI Standard 53 for the reduction of lead and 99.99% of cysts.

Model 6428-C replacement filter twelve-pack is used with the Haws 1200 series water coolers. They are carbon block filter cartridges with a service life of 1 year/3000-gallons (11356 L). Each filter contains an on-board chip to store total gallon usage; this chip interfaces with an Electronic Lifecycle Control system to allow water flow only until the filter reaches its total gallon capacity. Tested and certified by CSA against NSF/ANSI Standard 42 for the reduction of chlorine (taste and odor) and against NSF/ANSI Standard 53 for the reduction of lead and cysts.

Model 6422 quick change replacement filter cartridge provides great tasting “polished” water for Haws model 2000 HYDRATION STATION®. The carbon based filter effectively reduces unwanted tastes and odors, including chlorine taste & odor, and is designed for easy installation and cartridge change. A quarter-turn of the filter removes it from its housing, automatically shutting off the water supply, eliminating the need for shut-off valves to and from the filter system.

• Convenient quick change feature makes it easy to remove, easy to install.
• Effective unwanted taste & odor and chlorine & odor reduction.
• 2500 gallon (9463 L)filter life.

Product is compliant to California Health and Safety Code 116875 (AB 1953-2006).

Model 6423 replacement filter is used with the Hydration By Haws™ bottle filling stations. It is a carbon block filter cartridge with a service life of 1 year/2,500-gallons (9463 L). Filter contains an onboard chip to store total gallon usage; this chip interfaces with an Electronic Lifecycle Control system to allow water flow only until the filter reaches its total gallon capacity. Tested and certified by CSA against NSF/ANSI Standard 42 for the reduction of chlorine (taste and odor) and against NSF/ANSI Standard 53 for the reduction of lead and 99.99% of cysts.

Model 6424 Brita® Hydration Station® replacement filter cartridge is used on models 2000 and 2000SM systems which are tested and certified by CSA International against NSF/ANSI Standard 42 for the reduction of chlorine (taste and odor) and against NSF/ANSI Standard 53 for the reduction of lead and cysts. It is a 2,500 gallon (9463 L) capacity carbon block filter cartridge.

Haws model 6425 Activated Carbon granule filter removes chlorine taste and odor, and water born sediment. Polypropylene filter housing is 2″ (5.1 cm) in diameter by 6″ (15.2 cm) long, 3/8″ NPTF inlet and outlet. Rated for .5 gpm (1.9 L) and has a 1000 gallon capacity. This filter protects the water flow for one bubbler, two filters are required for Hi-Low, dual-height or multi-bubbler drinking fountains.

Haws manufactures drinking fountains and electric water coolers to be lead-free by all known definitions including ANSI/NSF Standard 61, Section 9, California Proposition 65 and the Federal Safe Drinking Water Act.

Model 6426 is a lead removal 10″ x 2″ (25.4 x 5.1 cm) in-line filter with 1/4″ NPTF inlet and outlet. Reduces lead from incoming water to levels below 15 ppb (@ flow rate = 0.5 gpm (1.3 L); pressure = 60 psi (4.2 bar)) for up to 500 gallons (1893 L). Filters particulate lead to 10 microns and absorbs soluble lead. Maximum flow of .5 gpm (1.9 L). Therefore, only one bubbler may be operated at a time on dual units. Does not leach lead once absorbed. Performance demonstrated under NSF Standard 53 and 42 by independent, certified testing laboratory.

Haws manufactures drinking fountains and electric water coolers to be lead-free by all known definitions including NSF/ANSI Standard 61, Section 9, California Proposition 65 and the Federal Safe Drinking Water Act.

Model 6428 replacement filter is used with the RIVIVE™ series and Haws 1200F series water coolers, and many indoor and outdoor fountains. It is a carbon block filter cartridge with a service life of 1 year/3000-gallons (11356 L). For the 1200F series, the filter contains an onboard chip to store total gallon usage; this chip interfaces with an Electronic Lifecycle Control system to allow water flow only until the filter reaches its total gallon capacity.

Tested and certified by CSA against

• NSF/ANSI Standard 42 for the reduction of chlorine (taste and odor)
• NSF/ANSI Standard 53 for the reduction of lead and cysts.

The Haws 1201SF wall mount filtered water cooler is the newest addition to the most comprehensive hydration offering in the industry. The modern, innovative design is tailored to meld with office spaces, universities and airports, or serve the functional needs of spaces like a school gymnasium. The electronic push bar activated solenoid valve provides easy activation, and the pressure-regulating bubbler with a flexible antimicrobial rubber mouth guard requires no adjusting. Fresh, always filtered water with the Electronic Lifecycle Control feature shuts water flow off when filter reaches its gallons capacity. Flow will begin again when filter is replaced.

• Flexible bubbler mouth guard to protect against injury
• Self-regulating flow – no need to adjust to varying incoming water pressures
• Anti-rotational screwed-in-place bubbler head
• Smart energy saving feature powers down cooler during periods of non-use; great for evenings and weekends
• High traffic area ready with a 3000-gallon (11,356 L) capacity filter
• Energy-Efficient Refrigeration Evaporator: Enhanced tankless evaporator coil using thermal mass cooling technology, with 100 percent water content flushed with every use.
• Durable, easy to clean 304 stainless steel skin
• Retrofit installation compatibility over many existing water coolers
• 100% lead free waterways
• Unique basin design reduces water splashing and simplifies cleaning
• Galvanized steel frame
• Rated for indoor use
• Designed and assembled in the USA

CSA certified to comply with NSF/ANSI 42, NSF/ANSI 53, NSF/ANSI/CAN 61: Q ≤ 1, NSF/ANSI/CAN 372, ASME A112.18.1/CSA B125.1, UL 399 and CSA C22.2 No. 120. ADA compliant to ICC A117.1, CSA B651, DOJ s 2010 ADA Standards for Accessible Design when properly installed. ASHRAE 18 compliant chilling capacity of 8.0 gallon per hour of 50 degree drinking water, based on 80 degree inlet water and 90 degree ambient temperature. FCC ID: 2AUAN-1200SF and IC: 25959-1200SF.

Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine), and failure to heed these conditions may void warranty.

The Haws 1212SF wall-mount Hi-Lo ADA water cooler with water bottle filling station is the newest addition to the most comprehensive hydration offering in the industry. The modern, innovative design is tailored to meld with office spaces, universities and airports, or serve the functional needs of spaces like a school gymnasium. The Hi-Lo dual station design allows for standard left-side high/right-side low ADA fountain access. The electronic push bar activated solenoid valves provide easy activation, and the pressure-regulating bubblers with a flexible antimicrobial rubber mouth guards requires no adjusting. Sensor activated bottle filler allows for hands free operation, and intuitive LED electronic display keeps the user informed when the water is being filtered and how many plastic bottles have been saved. Fresh, always filtered water with the Electronic Lifecycle Control feature shuts water flow off when filter reaches its gallons capacity. Flow will begin again when filter is replaced.

• Flexible bubbler mouth guard to protect against injury
• Self-regulating bubbler flow – no need to adjust to varying incoming water pressures
• Anti-rotational screwed-in-place bubbler head
• Energy-Efficient Refrigeration Evaporator: Enhanced tankless evaporator coil using thermal mass cooling technology, with 100 percent water content flushed with every use
• Hands-free sensor operated bottle filler
• Vandal-resistant sensor resists scratching and water droplet fowling
• Auto purge feature automatically cycles once every 24 hours to assure a fresh water supply as well as trap integrity
• LED illuminated bottle fill area
• Quick 1.1 GPM fill rate (depending on incoming pressure) for water bottle filling station
• Smart energy savings feature powers down refrigeration system after 2 hours of non-use and the lights are shut off, and will automatically start again when used or light is restored to normal
• Programmable to be shut-down during planned facility closures, weekends, etc.
• High traffic area ready with a 3000-gallon (11,356 L) capacity filter
• Durable, easy to clean 304 Stainless Steel skin
• Retrofit installation compatibility over many existing water coolers
• 100% lead free waterways
• Unique basin design reduces water splashing and simplifies cleaning
• Galvanized steel frame
• Rated for indoor use
• Designed and assembled in the USA

CSA certified to comply with NSF/ANSI 42, NSF/ANSI 53, NSF/ANSI/CAN 61: Q ≤ 1, NSF/ANSI/CAN 372, ASME A112.18.1/CSA B125.1, UL 399 and CSA C22.2 No. 120. ADA compliant to ICC A117.1, CSA B651, DOJ s 2010 ADA Standards for Accessible Design when properly installed. ASHRAE 18 compliant chilling capacity of 8.0 gallon per hour of 50 degree drinking water, based on 80 degree inlet water and 90 degree ambient temperature. FCC ID: 2AUAN-1200SF and IC: 25959-1200SF.

Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine), and failure to heed these conditions may void warranty.

Trouble viewing this website?

Without an up-to-date browser, you may have trouble with some of our features.

Update Now

Edge

Firefox

Chrome