Model SP121 auxiliary outlet is specifically designed for the 8315CTFP combination shower and eyewash. The configurable outlet design allows for both the SP145 drench hose and the SP158.8 freeze valve to be mounted at the same time, and/or to permit supply water re-circulation through the shower piping.
932X – Water Hammer Arrestor Piping KitThe Haws 932X water hammer arrestor and piping kit series is designed for use with the Haws 9321, 9326 and 9327 Instantaneous Water Heaters. The kit is supplied with stainless steel piping, 1-1/4″ lead-free brass supply valve and Y strainer, lead-free bronze 1-1/4″ pressure regulating valve, and a lead-free brass water hammer arrestor. There are 10 kits available according to the size of arrestor needed, and whether the heater is ordered with or without support legs (refer to the sizing chart below).
Water Hammer Arrestor Sizing Chart |
|||
| Pipe Length (header to shower) | Arrestor Size | 9326/7 Unit with Legs Kit # | 9321/6/7 Unit without Legs Kit # |
| 15′ | B | 932X-12 | 932X-11 |
| 15′ — 30′ | C | 932X-22 | 932X-21 |
| 30′ — 50′ | D | 932X-32 | 932X-31 |
| 50′ — 70′ | E | 932X-42 | 932X-41 |
| 75′ — 90′ | F | 932X-52 | 932X-51 |
Part 0000087773 is an aerator with housing for Haws eyePOD® with a flow of .5 gpm.
0000087801 – eyePOD NozzleP/N 0000087801 is a faucet nozzle, 1 gpm (3.8 L) for the AXION® eyePOD®.
0012506950 – Flow controlPart Number 0012506950 .25 gpm (.9 L) flow control. Controls water flow rate when flowing pressure is between 30 and 90 psi (2.1 and 6.2 bar) and is for use on Haws portable stainless steel tanks.
0006522676 – Tank ValvePart 0006522676 is an air fill valve for portable stainless steel tanks.
0006026148 – GratingPart 0006026148 made of heavy-duty galvanized steel, for use on model 8605WC (wheel chair compatible). Size 34-1/2″ x 31″
0006575900 – Shower ValvePart 0006575900 brass stay-open ball valve, equipped with stainless steel stem, 1″ IPS.
0006575890 – Ball ValvePart 0006575890 is a chrome-plated, stay-open, brass ball shower valve with stainless steel stem for horizontal installation. 1″ FIPS.<br>Models 8309WC and 8122HWC use a different handle valve. Please contact the Technical Department or Customer Service for further details.
0005987000 – TrapPart 0005987000 1-1/2″ IPS X 1-1/2″ O.D. satin chrome-plated brass trap with fittings to receive 1-1/4″ O.D. inlet.
0005717000 – Floor FlangePart 0005717000, 9″ (22.9 cm) diameter cast finish Type 304 Stainless Steel floor flange with three mounting holes. 1-1/4″ MIPS.
0005726850 – Flow SwitchPart number 0005726850 is a flow switch for use with the 9001.5 alarm. Switch will activate at 1.5 gallons (3.8 L) per minute of flow. AC, 125/250 volts, 5 amps, double pole, double throw. 1/2″ FIPS inlet and outlet. Class 1, Division 1, Group B, C, D. UL Listed.
