The Haws 9400 AXION® Steam Water Heater replaces hot water tanks when pressurized steam is available. When an emergency shower or eyewash is activated, the flow of water opens a steam control valve. The steam enters a brazed plate heat exchanger, instantly heating the water. This mixing valve blends hot and cold water to produce an output of 80° F (27° C ) tepid water. Additional valves keep the system preheated, freeze protected and scald protected. The steam valve will remain closed should there be a loss of water pressure. This station complies with the ANSI Z358.1 standard and mixing valve is designed to meet ASSE 1071

• For important installation information, please read Scald Warning.

The Haws 9400LPS AXION® Low Pressure Steam Water Heater replaces hot water tanks when pressurized steam is available. When an emergency shower or eyewash is activated, the flow of water opens a steam control valve. The steam enters a brazed plate heat exchanger, instantly heating the water. This mixing valve blends hot and cold water to produce an output of 80° F (27° C) tepid water. Additional valves keep the system preheated, freeze protected and scald protected. The steam valve will remain closed should there be a loss of water pressure. This station complies with the ANSI Z358.1 standard and mixing valve is designed to meet ASSE 1071

• For important installation information, please read Scald Warning.

Model 9201E emergency mixing valve (patent pending) thermostatically mixes hot and cold water to provide a safe fluid supply for emergency showers and eyewash equipment. Additionally, to ensure a fail-safe water supply for emergency shower and eyewash stations, a series of cold water by-pass valves open in the event of hot water pressure loss. (No gauges supplied – ASSE 1071 standard recommends gauges be placed 5 to 8 feet (1.52 to 2.44 m) downstream for the most accurate temperature measurement.)

• A flow rate of 1 to 31 gpm (3.8 to 117.3 L) for better temperature control across the operating range
• AXION’s superior design and technology provide a complete safety solution for increased victim comfort.
• Lowest internal pressure drop for this class of valve (advantage where supply pressure is low)
• Wax based thermostat technology for fast response time with proven highly reliable temperature control
• Highest Cold Water Bypass flow rate in the industry (65% of rated tepid flow rate)
• Brass valve design with internal check stops
• Over-sized valve seats resist failures caused by foreign matter
• A new and efficient shuttle design eliminates valve sticking
• A custom funnel design improves temperature control at low flow rates
• Outlet temperature is factory set to 85° F (29° C).
• Tempered water: High temperature limit is factory set to 90° F (32° C).
• Cold water by-pass valves are closed during normal operation, regardless of flow rate.
• For important installation information, please read Scald Warning.

CSA Listings: CSA certified per ASSE 1071, ANSI Z358.1, and applicable sections of CSA B125.3.

Model 9201EFE Emergency Thermostatic Mixing Valve (patent pending) thermostatically mixes hot and cold water to provide a safe fluid supply for emergency eyewash equipment. Additionally, to ensure a fail-safe water supply for emergency eyewash stations, a series of cold water by-pass valves open in the event of hot water pressure loss. (No gauges supplied – ASSE 1071 standard recommends gauges be placed 5 to 8 feet (1.52 to 2.44 m) downstream for the most accurate temperature measurement.)

• A flow rate of 1 to 12 gpm (3.8 to 45.4 L) for better temperature control across the operating range
• AXION’s superior design and technology provide a complete safety solution for increased victim comfort.
• Lowest internal pressure drop for this class of valve (advantage where supply pressure is low)
• Wax based thermostat technology for fast response time with proven highly reliable temperature control
• Highest Cold Water Bypass flow rate in the industry (83% of rated tepid flow rate)
• Brass valve design with internal check stops
• Over-sized valve seats resist failures caused by foreign matter
• A new and efficient shuttle design eliminates Thermostatic Mixing Valve sticking
• A custom funnel design improves temperature control at low flow rates
• Outlet temperature is factory set to 85° F (29° C).
• Tempered water: High temperature limit is factory set to 90° F (32° C).
• Cold water by-pass valves are closed during normal operation, regardless of flow rate.
• For important installation information, please read Scald Warning.

CSA Listings: CSA certified per ASSE 1071, ANSI/ISEA Z358.1 and applicable sections of CSA B125.3.

Model 9201EW Emergency Valve thermostatically mixes hot and cold water to provide a safe fluid supply for a single emergency eye/face wash. Additionally, to ensure a fail-safe water supply for emergency eyewash stations, a cold water by-pass valves open in the event of hot water pressure loss. (No gauges supplied – ASSE 1071 standard recommends gauges be placed 5 to 8 feet (1.52 to 2.44 m) downstream for the most accurate temperature measurement.)

• A flow rate of 1 to 10 gpm (3.8 to 37.8 L) for better temperature control across the operating range
• AXION’s superior design and technology provide a complete safety solution for increased victim comfort.
• Wax based thermostat technology for fast response time with proven highly reliable temperature control
• Cold Water Bypass flow rate of 3.8 gpm (14.4 L) (When tested under conditions specified in ASSE 1071)
• Brass valve design with supplied check valves
• Over-sized valve seats resist failures caused by foreign matter
• Efficient funnel design improves temperature control at low flow rates
• Outlet temperature is factory set to 85° F (29° C).
• Tempered water: High temperature limit is factory set to 90° F (32° C).
• For important installation information, please read Scald Warning.

CSA Listings: CSA certified per ASSE 1071, ANSI/ISEA Z358.1, NSF/ANSI/CAN 372, and applicable sections of CSA B125.3.

Model 9201H, low-lead Emergency Valve (patent pending), thermostatically mixes hot and cold water to provide a safe fluid supply for emergency showers and eyewash equipment. The valve contains a secondary high temperature limit valve to provide additional protection to the user in the event of main tempering valve malfunction. Additionally, to ensure a fail-safe water supply for emergency shower and eyewash stations, a series of cold water by-pass valves open in the event of hot water pressure loss. (No gauges supplied – ASSE 1071 standard recommends gauges be placed 5 to 8 feet downstream for the most accurate measurement.)

• A flow rate of 1 to 31 gpm (3.8 to 117.3 L) for better temperature control across the operating range
• AXION’s superior design and technology provide a complete safety solution for increased victim comfort.
• Lowest internal pressure drop for this class of valve (advantage where supply pressure is low)
• Wax based thermostat technology for fast response time with proven highly reliable temperature control
• Highest Cold Water Bypass flow rate in the industry (65% of rated tepid flow rate)
• Low-lead brass valve design with internal check stops
• Oversized valve seats resist failures caused by foreign matter
• A new and efficient shuttle design eliminates valve sticking
• A custom funnel design improves temperature control at low flow rates
• Outlet temperature is factory set to 85° F (29° C)
• Tempered water: High temperature limit is factory set to 87° F (30° C)
• Cold water by-pass valves are closed during normal operation, regardless of flow rate

Listings: CSA certified per ASSE 1071, ANSI Z358.1, applicable sections of CSA B125.3, NSF/ANSI 372, NSF/ANSI 61-section 8, California Health and Safety Code 116875 (AB 1953).

Haws 8905 features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eye washes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain. Unit is activated with simple squeeze lever operation.

• Eyewash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
• Dust cover allows for the 8905 to stay protected from debris when not in use
• Easily detected and maintained, emergency equipment is equipped with safety sign and test card to record weekly testing
• 12 foot (365.8 cm) yellow recoil hose provides an extended coverage area to further optimize the irrigation process
• In order to comply with state codes the use of a vacuum breaker is required with all hand held eye/face wash body spray units (Haws offers model SP212)

Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment.

Model 8760 ePOD™ shower and eye/face wash tempering skid mixes it’s pre-heated water supply in its onboard storage tank with low temperature facility water through its Haws Tempered Water Blending System, to produce an ANSI compliant water supply for all safety equipment in the plumbed system. It shall include an aluminum channel 5′ x 5′ (1.5 x 1.5 m) frame with a composite equipment platform, with safety green chemical and UV resistant polyester based powder coating. There is a 20 gpm (75.7 L) AXION shower head, an eyewash that features the medically acclaimed AXION® MSR eye/face wash head assembly. This single shower and/or eyewash or multiple shower/eyewash tempering unit provides an operating temperature range of 35° to 120° F (1.67° to 48.9° C), supplied with 480V single phase tie in, and is designed to operate with a number of tempering and electrical options. The tempered water blending system will include an integral hot water supply, and will incorporate fail-safe features like anti-scald protection and full flow cold water bypass. The electrical system can be easily adapted to voltages upon request. Combination shower and eyewash is certified by CSA to meet the ANSI Z358.1 Standard for emergency Eyewash and Shower Equipment. For the electrical certification, the system is certified by accredited Certification Body.

• Standardized platform provides shorter lead times and customizable configuration options
• Advanced Programmable Monitoring Control System with real-time digital display
• High visibility safety green for quick visual placement during an emergency
• AXION technology with inverted eye/face wash and hydrodynamic shower flows
• Ready-to-incorporate design variations including hot water supply, electrical type, temperature control, stainless steel piping, and more

Model 8780 skid-mounted tempering system is the heart of the Haws Integrated tempering solutions line, offering a wide range of options to apply the equipment to an extensive range of water tempering solutions. The 8780 tempering skid mixes it’s pre-heated water supply in its onboard storage tank with low temperature facility water through its Haws Tempered Water Blending System, to produce an ANSI compliant water supply for all safety equipment in the plumbed system. Included is an aluminum 5′ x 5′ (1.5 x 1.5 m) frame with a composite equipment platform, with HYTEX Black chemical and UV resistant polyester based powder coating. This multiple shower and eyewash feeder provides an operating temperature range of 32° to 104° F (0° to 40° C), and is designed to operate with a number of tempering and electrical options. The standard tempered water blending system includes a 318 gallon hot water tank with 480V 1ph, and will incorporate fail-safe features like anti-scald protection and full flow cold water bypass. The electrical system can be easily adapted to voltages upon request.

• CSA Certified to ASSE 1071 and QPS Electrically Certified for Ordinary Locations
• Standardized platform provides shorter lead times and customizable configuration options
• Ready-to-incorporate design variations including hot water supply, electrical type, blending capabilities, stainless steel piping, and more
• Optional VFD/Pump package for recirculation and/or pressure boosting applications

Model 8785 enclosed tempering system can be placed into any environment. Whether the intent is the protect the equipment from dirty or contaminated environments, shield from unpredictable outdoor weather, or provide a heated/cooled enclosure in extreme temperature installations the 8785 is your go-to choice for a rugged yet flexible water tempering skid solution. It shall include an all-weather 5′ x 5′ (1.52 x 1.52m) booth which provides optional operating temperature ranges of -50° to 120° F (-45.5° to 49.8° C), and is constructed of corrosion resistant aluminum paneling with polyester based powder coating. This single or multiple showers and/or eyewash tempering water unit with galvanized piping is designed to operate with several tempering and electrical options. Standard hook-up is a 480V, three phase inlet inside a TYPE 4 enclosure. The internal booth temperature can be maintained by an optional space heater. The tank water temperature is maintained by an immersion heater. The electrical system can be easily adapted to voltages upon request. The 8785 tempering booth utilizes the Haws Tempered Water Blending System to provide tempered water under dire situations, and incorporates fail-safe features like anti-scald protection and full flow cold water bypass in the event of hot water failure. 1-1/2″ tepid and cold water inlets.

• CSA Certified to ASSE 1071 and QPS Electrically Certified for Ordinary Locations
• Standardized platform provides shorter lead times and customizable configuration options
• Ready-to-incorporate design variations including hot water supply, electrical type, blending capabilities, stainless steel piping, and more
• Fully assembled and tested for quick placement and hook-up

Haws Model 8317CTFP heat traced combination shower and eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain. AXION MSR also offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets. Virtually eliminating mishaps, the unit’s safety features include: a thermal actuator bleed valve, 120V thermostat cable double wrapped piping, 3/4″ (1.9 cm) insulation surrounding piping and UV protected outside jacket to prevent freezing, as well as a universal emergency sign.

• Perfect for extreme weather conditions dropping down to -30° F (-34.4° C)
• Eyewash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
• Universal design allows for top or bottom water supply
• Requires minimal maintenance and is equipped with test card to record weekly testing
• Reducing installation time, entire unit is pre-built and fully pressure tested
• Solid stainless steel pipe stanchion and galvanized fittings make for a sturdy piece of corrosive resistant equipment
• Rated Class 1, Div 2, Group B, C & D. Temperature code T6

Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment. Model is QPS-C-US Certified, TYPE 4. (Nema 4 equivalent)

Haws Model 8317CTFP.220V heat traced combination shower and eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain. AXION MSR also offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets. Virtually eliminating mishaps, the unit’s safety features include: a thermal actuator bleed valve, 220V thermostat cable double wrapped piping, 3/4″ (1.9 cm) insulation surrounding piping and UV protected outside jacket to prevent freezing, as well as a universal emergency sign.

• Perfect for extreme weather conditions dropping down to -30° F (-34.4° C)
• Eyewash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
• Universal design allows for top or bottom water supply
• Requires minimal maintenance and is equipped with test card to record weekly testing
• Reducing installation time, entire unit is pre-built and fully pressure tested
• Solid stainless steel pipe stanchion and galvanized fittings make for one sturdy piece of corrosive resistant equipment
• Rated Class 1, Division 2, Group B, C and D

Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment. Model is CSA electrical certified, TYPE 4. (Nema 4 equivalent)

Trouble viewing this website?

Without an up-to-date browser, you may have trouble with some of our features.

Update Now

Edge

Firefox

Chrome