The newly retooled Haws 7501TH compact portable tempered eyewash is ideal for remote locations. The 9-gallon (34 L), gravity-fed, hazardous location eyewash uses a NEMA 4 heated, insulated blanket to provide ANSI compliant tempered water in operating temperatures to -20° F (-30° C) for locations without access to a continuous potable water source. This unit is a cost-effective solution ideal for locations without access to potable water, including temporary decontamination sites, temporary treatment facilities, and short-term job sites.

Product enhancements include:

• FDA approved high-density green polyethylene tank that is easily activated by pulling the yellow activation arm down to the open position
• A wide-fill opening with a securely threaded cap, and a pronounced “Max Fill” line that permits easy inspection, cleaning and filling
• Ease of relocation due to “Lift Here” graphics, easily mounted bracket (included) and light design
• Rated 120VAC, 60 Hz, 1.38A
• Measurements: 16″ high, 24″ wide, 12″ deep (36.8 x 55.9 x 25.7 cm). *Note: Unit must be wall hung

CSA certified for NEMA/Type 4 in Class 1, Division 2, Group B, C, D, T6, and Class 2, Division 2, Group F, G locations; and to ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment, which is clearly called out on the exterior of the unit.

The newly retooled Haws 7501T240H compact portable tempered eyewash ideal for remote locations. The 9-gallon (34 L), gravity-fed, hazardous location eyewash uses a NEMA 4 heated, insulated blanket to provide ANSI compliant tempered potable water in operating temperatures -20° F (-30° C) for locations without access to a continuous potable water source. 240VAC, 50/60Hz, 0.64A electrical requirement. This unit is a cost-effective solution ideal for locations without access to potable water, including temporary decontamination sites, temporary treatment facilities, and short-term job sites.

Product enhancements include:

• FDA approved high-density green polyethylene tank that is easily activated by pulling the yellow activation arm down to the open position
• A wide-fill opening with a securely threaded cap, and a pronounced “Max Fill” line that permits easy inspection, cleaning and filling
• Ease of relocation due to “Lift Here” graphics, easily mounted bracket (included) and light design
• Measurements: 16″ high, 24″ wide, 12″ deep (36.8 x 55.9 x 25.7 cm). *Note: Unit must be wall hung

CSA certified for NEMA/Type 4 in Class 1, Division 2, Group B, C, D, T6, and Class 2, Division 2, Group F, G locations; and to ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment, which is clearly called out on the exterior of the unit.

The newly retooled Haws 7501T240 compact portable tempered eyewash is ideal for remote locations. The 9-gallon (34 L), gravity-fed, eyewash uses a NEMA 4 heated, insulated blanket to provide ANSI compliant tempered potable water in operating temperatures between -20° F (-30° C) and 100° F (38° C) for locations without access to a continuous potable water source. The self-contained heating blanket electrical system uses NEMA 4 rated components. 240VAC, 50/60Hz, 0.64A electrical requirement. This unit is a cost-effective solution ideal for locations without access to potable water, including temporary decontamination sites, temporary treatment facilities, and short-term job sites.

Product enhancements include:

• FDA approved high-density green polyethylene tank that is easily activated by pulling the yellow activation arm down to the open position
• A wide-fill opening with a securely threaded cap, and a pronounced “Max Fill” line that permits easy inspection, cleaning and filling
• Ease of relocation due to ‘Lift Here’ graphics, easily mounted bracket (included) and light design
• Measurements: 16″ high, 24″ wide, 12″ deep (36.8 x 55.9 x 25.7 cm). *Note: Unit must be wall hung

CSA certified for NEMA/Type 4 in ordinary locations, and to ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment, which is clearly called out on the exterior of the unit

The newly retooled Haws 7501T compact portable tempered eyewash ideal for remote locations. The 9-gallon (34 L), gravity-fed, eyewash uses a heated, insulated blanket to provide ANSI compliant tempered potable water in operating temperatures between -20° F (-30° C) and 100° F (38° C) for locations without access to a continuous potable water source. 120VAC, 60Hz, 1.38A electrical requirement with supplied 8′ power cord. This unit is a cost-effective solution ideal for locations without access to potable water, including temporary decontamination sites, temporary treatment facilities, and short-term job sites.

Product enhancements include:

• FDA approved high-density green polyethylene tank that is easily activated by pulling the yellow activation arm down to the open position
• A wide-fill opening with a securely threaded cap, and a pronounced “Max Fill” line that permits easy inspection, cleaning and filling
• Ease of relocation due to “Lift Here” graphics, easily mounted bracket (included) and light design
• Measurements: 16″ high, 24″ wide, 12″ deep (36.8 x 55.9 x 25.7 cm). *Note: Unit must be wall hung

CSA certified for NEMA/Type 3R in ordinary locations, and to ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment, which is clearly called out on the exterior of the unit.

Haws heated portable Model 7500EB is ideal for remote locations. Using gravity to supply a continuous flow of clean water to injured personnel for a full 15 minutes at .4 gpm (1.5 L), this model is a reliable source for safety. The 7500’s full patterned flushing feature is capable of being used in sub-freezing temperatures.

• Featuring a FDA approved high-density green polyethylene tank easily activated by pulling the yellow activation arm down to the open position
• 1000 Watt, 120 VAC submersible thermostatically controlled heater element
• Fully functional to -30° F (-34.4° C) and should stay between 65° and 75° F (18.3 and 23.9° C)
• Model supplied with 9′ (274.3 cm) power cord, 3-prong plug, and fitted insulated protective cover
• A wide-fill opening with threaded cap permits easy inspection, cleaning and filling
• Relocation is simple due to the easily mounted (bracket included) and light design of this 16 gallon (60.6 L) portable
• Measurements: 22-1/2″ high, 21-1/2″ wide, 19-1/2″ deep (57.2 x 54.6 x 49.5 cm)

Model 7500EB is certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment. Electrical components are UL rated.

Haws emergency eyewash systems, like the freeze protected 7433FP, use anti-surge Soft-Flo heads that activate with the push of a stainless steel flag. Heads come equipped with pop-off dust covers, so when debris is present, the irrigation process stays protected. Space efficient design and integral wall bracket allow the 7433FP to be mounted in a number of easily accessible locations.

• A great addition to multiple unsafe environments where the eyes may be exposed to corrosive materials
• Easily detected and maintained, emergency equipment is equipped with safety sign and test card to record weekly testing
• Reducing installation time, eyewash and valve assembly is pre-built and fully water/pressure tested
• Fully functional in freezing environments when installed properly
• All unused water drains out of the unit through a drain valve behind the wall
• Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment

The Haws 6518FR freeze-resistant valve system is a fully engineered pneumatic operated valve for use on all Haws single bubbler freeze-resistant pedestal fountains. The placement of the valve below the frost line allows the system to function when freezing conditions are present at surface level. Its fully accessible design allows for reliable service year round.

• Installed below the frost line, the valve remains fully functional under the worst of weather conditions, with the fountain remaining functional as well
• If a maintenance issue ever arises, rest assured that the valve assembly is easily removed and replaced without disrupting the remainder of the fountain
• Flow is easily adjustable with supplied regulator valve
• Unit is applicable for single pedestal mounted fountain designs
• Consult with the local authority having jurisdiction before installation in order to determine if any additional regulations or requirements may apply

Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and NSF/ANSI/CAN 61: Q ≤ 1.

The Haws 6518.2FR freeze-resistant valve system is a fully-engineered pneumatic operated valve for use on all Haws hi-lo two bubbler freeze-resistant pedestal fountains. The placement of the valve below the frost line allows the system to function when freezing conditions are present at surface level. Its fully accessible design allows for reliable service year round.

• Installed below the frost line, the valve remains fully functional under the worst of weather conditions, with the fountain remaining functional as well
• If a maintenance issue ever arises, rest assured that the valve assembly is easily removed and replaced without disrupting the remainder of the fountain
• Flow is easily adjustable with supplied regulator valve
• Unit is applicable for dual pedestal mounted fountain designs
• Consult with the local authority having jurisdiction before installation in order to determine if any additional regulations or requirements may apply

Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and NSF/ANSI/CAN 61: Q ≤ 1.

The Haws 3612FR heavy-duty vandal-resistant outdoor, freeze-resistant ADA stainless-steel pedestal bottle filler and drinking fountain can be configured in multiple variations before or after installation. This model is standard with one bottle filler and two drinking fountain stations, and the option of adding/changing a drinking fountain, bottle filler, dog bowl and/or hose bib at any time. Water delivery is provided by a fully engineered pneumatic valve assembly that is one of the best in freeze-resistant technologies, and provides year-round operation. Equipped with vandal resistant components for long lasting durability.

• Interchangeable fountain and bottle filler arms help this unit to meet the changing needs of its environment
• Vandal resistant components include the bubblers, bottle filler nozzle, buttons, drains and access plates
• ADA compliant standing adult height, wheel chair, and child wheel chair arm positions to accommodate all users
• Large-opening bottle filler with quick-fill 1 gpm flow rate
• Heavy-duty fabricated stainless steel with matte silver powder-coated finish
• Custom color options available
• 100% lead-free waterways
• Consult with the local authority having jurisdiction before installation in order to determine if any additional regulations or requirements may apply

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.

The Haws 3602FR heavy-duty outdoor freeze-resistant ADA vandal-resistant pedestal drinking fountain can be configured in multiple variations before or after installation. This product is standard with two drinking fountain stations, with the option of adding/changing a drinking fountain, bottle filler, dog bowl and/or hose bib at any time. Water delivery is provided by a fully engineered pneumatic valve assembly that is one of the best in freeze-resistant technologies, and provides year-round operation. Equipped with vandal resistant components for long lasting durability.

• ADA compliant standing adult height, wheel chair, and child wheel chair arm positions to accommodate all users
• Vandal resistant components include the bubblers, buttons, drains and bottom/access plates
• Heavy-duty fabricated stainless steel with matte silver powder-coated finish
• Bowl and bubbler head can be rotated for location needs
• Custom color options available
• 100% lead-free waterways
• Consult with the local authority having jurisdiction before installation in order to determine if any additional regulations or requirements may apply

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.

The Haws 3610FR heavy-duty vandal-resistant outdoor freeze-resistant pedestal bottle filler can be configured in multiple variations before or after installation. This model is standard with one bottle filler station, and the option of adding/changing a drinking fountain, bottle filler, dog bowl and/or hose bib at any time. Water delivery is provided by a fully engineered pneumatic valve assembly that is one of the best in freeze-resistant technologies, and provides year-round operation. Equipped with vandal resistant components for long lasting durability.

• Modular design allows options and accessories to be added or removed at any time
• Vandal resistant components include the bottle filler nozzle, button, and access plates
• Large-opening bottle filler with quick-fill 1 gpm flow rate
• Heavy-duty fabricated stainless steel with matte silver powder-coated finish
• Custom color options available
• 100% lead-free waterways
• Consult with the local authority having jurisdiction before installation in order to determine if any additional regulations or requirements may apply

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.

The Haws 3611FR heavy-duty vandal-resistant outdoor freeze-resistant ADA stainless-steel pedestal bottle filler and drinking fountain can be configured in multiple variations before or after installation. This model is standard with one drinking fountain and one bottle filler, with the option of adding/changing a drinking fountain, bottle filler, dog bowl and/or hose bib at any time. Water delivery is provided by a fully engineered pneumatic valve assembly that is one of the best in freeze-resistant technologies, and provides year-round operation. Equipped with vandal resistant components for long lasting durability.

• Interchangeable fountain and bottle filler arms help this unit to meet the changing needs of its environment
• Vandal resistant components include the bubbler, bottle filler nozzle, buttons, drain and access plates
• ADA compliant standing adult height, wheel chair, and child wheel chair arm positions to accommodate all users
• Large-opening bottle filler provides 1 gallon per minute flow
• Heavy-duty fabricated stainless steel with matte silver powder-coated finish
• Bowl and bubbler head can be rotated for location needs
• Custom color options available
• 100% lead-free waterways
• Consult with the local authority having jurisdiction before installation in order to determine if any additional regulations or requirements may apply

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.

Trouble viewing this website?

Without an up-to-date browser, you may have trouble with some of our features.

Update Now

Edge

Firefox

Chrome