Model 3661 compression hose bib, turn-knob activated faucet is mounted with tamper-resistant screws to a ready-to-install panel, which is made of heavy-duty fabricated stainless steel with matte silver powder-coated finish. Connection is 3/4″ male hose thread x 1/2″ female NPT inlet. Certified by CSA to NSF/ANSI 61, section 9 and NSF/ANSI 372; and was evaluated to be compliant to US and Canada Plumbing Codes including Uniform Plumbing Code (UPC), International Plumbing Code (IPC) and National Plumbing Code of Canada (NPC) by CSA, & California Proposition 65.
3670 – Pet Fountain AttachmentThe Haws 3670 heavy-duty dog bowl uses a patented push-button stainless steel valve assembly allowing for front access stream adjustment as well as cartridge and strainer access. Heavy-duty fabricated stainless steel with matte silver powder-coated finish.
- Easy maintenance with front access to valve adjustment and cartridge replacement
- 100% lead-free waterways
- Optional push button relocation plate positions activation of the dog bowl higher for easy hand operation.
Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and NSF/ANSI/CAN 61: Q ≤ 1.
3671 – Pedestal Arm AttachmentThe Haws 3671 silver powder-coated stainless-steel pedestal arm allows for the mounting of the Haws 3690 series bottle filler attachment or the 3680 series drinking fountain attachment on to a 3600 series outdoor pedestal fountain.
3680 – Drinking Fountain Bowl Attachment For 3600 SeriesThe Haws 3680 heavy-duty drinking fountain attachment for the 3600 pedestal series uses a patented push-button stainless steel valve assembly allowing for front access stream adjustment as well as cartridge and strainer access. This silver powder-coated stainless steel fountain offers the ‘only’ all stainless-steel valve body that is machined out of solid bar stock, is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer, and has front access to the water stream height adjustment for easy maintenance without having to remove the valve.
- Easy maintenance with front access to valve adjustment and cartridge replacement
- Polished chrome-plated brass vandal-resistant shielded bubbler head
- 100% lead-free waterways
Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and NSF/ANSI/CAN 61: Q ≤ 1.
3680FR – Drinking Fountain, Freeze Resistant Attachment For 3600 SeriesThe Haws 3680FR heavy-duty freeze-resistant drinking fountain attachment for the 3600 pedestal series is made of heavy-duty 3/16″ fabricated stainless steel with silver powder-coated finish.
- Polished chrome-plated brass vandal-resistant shielded bubbler head
- Polished chrome-plated vandal-resistant waste strainer with top-down clean-out access
- 100% lead-free waterways.
Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and NSF/ANSI/CAN 61: Q ≤ 1.
3690 – Bottle Filler AttachmentThe Haws 3690 heavy-duty bottle filler for the 3600 pedestal series fountains uses a patented push-button stainless steel valve assembly allowing for front access stream adjustment as well as cartridge and strainer access. This pedestal mounted stainless steel bottle filler offers the ‘only’ all stainless-steel valve body that is machined out of solid bar stock, is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer, and has front access to the water stream height adjustment for easy maintenance without having to remove the valve. Made of heavy-duty fabricated stainless steel with silver powder-coated finish, and a satin finish stainless steel drain plate with customization options.
- Large-opening bottle filler with quick-fill 1 gpm flow rate
- Easy maintenance with front access to valve adjustment and cartridge replacement
- Polished chrome-plated vandal-resistant waste strainer, and vandal-resistant access plate
- 100% lead-free waterways
Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and NSF/ANSI/CAN 61: Q ≤ 1.
3690FR – Bottle Filler, Freeze Resistant AttachmentThe Haws 3690FR heavy-duty freeze-resistant bottle filler for the 3600 pedestal series uses a heavy-duty fabricated stainless steel with silver powder-coated finish.
- Large-opening bottle filler with quick-fill 1 gpm flow rate
- Polished chrome-plated vandal-resistant waste strainer, and vandal-resistant access plate
- 100% lead-free waterways.
Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and NSF/ANSI/CAN 61: Q ≤ 1.
4010 – Deck FountainDeck-mounted units like the 4010 are installed in accessible countertop locations for quick locating and convenient operation. Push button operated stainless steel bubbler valve with adjustable stream regulation make this fountain easily activated and maintained. Slope down stream guide minimizes splashing, keeping the surrounding area clean. Equipped with mounting bracket and waste strainer, this fountain is vandal resistant and easily placed.
- Stainless steel construction offers a good amount of durability and corrosion resistance
- 100% lead-free waterways
- Anti-squirt flow prevents surging water, keeping the drinking area contained and clean
Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.
4110ADA – Enameled Iron Deck SinkDeck mounted sink units like the 4110ADA are installed in accessible countertop locations for quick locating and convenient operation. Sunken down sink design with water tight fit and stainless steel mounting rim helps to minimize excess splashing, keeping the drinking area contained.
- White acid-resistant enameled iron sink makes for one of the toughest mounting surfaces Haws produces
- Measurements are 24″ x 16″ x 5″ (61 x 40.6 x 12.7 cm)
- Mounted at the correct height and equipped with proper drinking fountain and faucet, this unit complies with the Americans with Disabilities Act requirements for drinking fountains
Specify one of the following gooseneck faucets to be installed left rear side:
Model 5510LF stay-open lever handle, polished chrome-plated brass gooseneck faucet,
Model 5452LF, self-closing lever handle polished chrome-plated brass gooseneck faucet, or
Model 5530LF stay-open, hot and cold lever handle, polished chrome-plated brass gooseneck faucet.
Specify the following bubbler to be installed on right front side;
Model 5054LF lever handle polished chrome-plated brass drinking faucet,
Model 5017LF push button polished chrome-plated brass drinking faucet with renewable cartridge and vandal resistant lock pin, or
Model 5051LF self-closing lever handle drinking faucet with a polished chrome-plated brass finish, adjustable stream flow, and vandal resistant lock pin.
4210 – Deck SinkDeck-mounted sink units like the 4210 are installed in accessible countertop locations for quick locating and convenient operation. Sunken down sink design helps to minimize excess splashing and self-rimming feature allows for easy mounting.
- Stainless steel construction offers a good amount of durability and corrosion resistance
- Beautiful satin finish resists stains and corrosion
- Sitting watertight along with sound deadening underneath keep this unit mounted securely on any countertop
- Measurements are 25″ x 17″ x 5″ (63.5 x 43.2 x 12.7 cm)
- Mounted at the correct height and equipped with proper drinking fountain and faucet, this unit complies with the Americans with Disabilities Act requirements for drinking fountains
Haws manufactures drinking fountains and electric water coolers to be lead-free by all known definitions including NSF/ANSI Standard 61, Section 9, California Proposition 65, and the Federal Safe Drinking Water Act.
Specify one of the following gooseneck faucets to be installed left rear side:
Model 5510LF stay-open lever handle, polished chrome-plated brass gooseneck faucet,
Model 5452LF self-closing lever handle polished chrome-plated brass gooseneck faucet or,
Model 5530LF stay-open, hot and cold lever handle, polished chrome-plated brass gooseneck faucet.
Specify the following bubbler to be installed on right front side:
Model 5054LF lever handle polished chrome-plated brass drinking faucet,
Model 5017LF push button polished chrome-plated brass drinking faucet with renewable cartridge and vandal resistant lock pin, or
Model 5051LF self-closing lever handle drinking faucet with a polished chrome-plated brass finish, adjustable stream flow, and vandal resistant lock pin.
4230 – Deck SinkDeck-mounted sink units like the 4230 are installed in accessible countertop locations for quick locating and convenient operation. Sunken down sink design helps to minimize excess splashing and self-rimming feature allows for easy mounting.
- Stainless steel construction offers a good amount of durability and corrosion resistance
- Beautiful satin finish resists stains and corrosion
- Sitting watertight along with sound deadening underneath keep this unit mounted securely on any countertop
- Measurements are 31″ x 19″ x 5″ (78.7 x 48.2 x 12.7 cm)
- Mounted at the correct height and equipped with proper drinking fountain and faucet, this unit complies with the Americans with Disabilities Act requirements for drinking fountains
Haws manufactures drinking fountains and electric water coolers to be lead-free by all known definitions including NSF/ANSI Standard 61, Section 9, California Proposition 65, and the Federal Safe Drinking Water Act.
Specify one of the following gooseneck faucets to be installed left rear side:
Model 5510LF stay-open lever handle, polished chrome-plated brass gooseneck faucet.
Model 5452LF self-closing lever handle polished chrome-plated brass gooseneck faucet or,
Model 5530LF stay-open, hot and cold lever handle, polished chrome-plated brass gooseneck faucet.
Specify the following bubbler to be installed on right front side:
Model 5054LF lever handle polished chrome-plated brass drinking faucet.
Model 5017LF push button polished chrome-plated brass drinking faucet with renewable cartridge and vandal resistant lock pin, or
Model 5051LF self-closing lever handle drinking faucet with a polished chrome-plated brass finish, adjustable stream flow, and vandal resistant lock pin.
5010.6427SS – Drinking FaucetModel 5010.6427SS push button bubbler valve is designed with an adjustable stream regulation and a shielded bubbler to provide an anti-squirt drinking stream. Unit is self contained and is constructed from stainless steel with a polished finish, making this bubbler valve resistant to corrosive materials, and is easy to keep clean.
- Bubbler head includes: socket flange locked to bubbler inlet, washers, and locknut
- Dimensions: Flange diameter is 2-1/8″ (5.4 cm), shank is 7/8″ (2.2 cm) diameter x 1-1/8″ (3.2 cm) long, and connection is a 3/8″ IPS inlet
- Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372,
California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and NSF/ANSI/CAN 61: Q ≤ 1.
