Haws emergency eyewash systems, like the freeze protected 7433FP, use anti-surge Soft-Flo heads that activate with the push of a stainless steel flag. Heads come equipped with pop-off dust covers, so when debris is present, the irrigation process stays protected. Space efficient design and integral wall bracket allow the 7433FP to be mounted in a number of easily accessible locations.

• A great addition to multiple unsafe environments where the eyes may be exposed to corrosive materials
• Easily detected and maintained, emergency equipment is equipped with safety sign and test card to record weekly testing
• Reducing installation time, eyewash and valve assembly is pre-built and fully water/pressure tested
• Fully functional in freezing environments when installed properly
• All unused water drains out of the unit through a drain valve behind the wall
• Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment

Model 7460 unmounted eye and face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain.

• Eyewash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
• Features a round 11″ (27.9 cm) stainless steel receptor
• Includes a mesh in-line strainer to collect line debris, and ball valve with stainless steel ball and stem for durability
• Supply: 1/2″ NPT. Waste: 1- 1/4″ NPT
• ANSI Z358.1 tempering compliance options

Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.

Haws portable Model 7500 is ideal for remote locations. Using gravity to supply a continuous flow of clean water to injured personnel for a full 15 minutes at .4 gpm (1.5 L), this model is a reliable source for safety. Recognizing the 7500’s full patterned flushing feature, those working in remote areas can’t help but feel confident with this piece of emergency equipment day after day.

• Featuring a FDA approved high-density green polyethylene tank easily activated by pulling the yellow activation arm down to the open position
• A wide-fill opening with threaded cap permits easy inspection, cleaning and filling
• Relocation is simple due to the easily mounted (bracket included) and light design of this 16 gallon (60.6 L) portable
• Measurements: 22-1/2″ high, 21-1/2″ wide, 19-1/2″ deep (57.2 x 54.6 x 49.5 cm)

Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment.

Haws heated portable Model 7500EB is ideal for remote locations. Using gravity to supply a continuous flow of clean water to injured personnel for a full 15 minutes at .4 gpm (1.5 L), this model is a reliable source for safety. The 7500’s full patterned flushing feature is capable of being used in sub-freezing temperatures.

• Featuring a FDA approved high-density green polyethylene tank easily activated by pulling the yellow activation arm down to the open position
• 1000 Watt, 120 VAC submersible thermostatically controlled heater element
• Fully functional to -30° F (-34.4° C) and should stay between 65° and 75° F (18.3 and 23.9° C)
• Model supplied with 9′ (274.3 cm) power cord, 3-prong plug, and fitted insulated protective cover
• A wide-fill opening with threaded cap permits easy inspection, cleaning and filling
• Relocation is simple due to the easily mounted (bracket included) and light design of this 16 gallon (60.6 L) portable
• Measurements: 22-1/2″ high, 21-1/2″ wide, 19-1/2″ deep (57.2 x 54.6 x 49.5 cm)

Model 7500EB is certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment.

The newly retooled Haws 7501 compact portable eyewash is a 9-gallon (34.1 L) capacity gravity operated portable eyewash that supplies a continuous flow of water for a full 15 minutes at .4 gpm. This unit is a cost-effective solution ideal for locations without access to potable water, including temporary decontamination sites, temporary treatment facilities, and short-term job sites.

Product enhancements include:

• Featuring a FDA approved high-density green polyethylene tank that is easily activated by pulling the yellow activation arm down to the open position
• A wide-fill opening with a securely threaded cap, and a pronounced ‘Max Fill’ line permits easy inspection, cleaning and filling
• Relocation is simple due to ‘Lift Here’ graphics, easily mounted bracket (included) and light design of this 9-gallon (34.1 L) portable
• Measurements: 14-1/2″ high, 22″ wide, 10-1/8″ (36.8 x 55.9 x 25.7 cm) deep. *Note: Unit must be wall hung

Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment. This is clearly called out on the exterior of the unit.

Model 7501BL NEMA 3R heated, insulated blanket provides ANSI compliant tempered water in operating temperatures to -20° F (-30° C). The self-contained blanket easily installs on to existing model 7501. Eyewash and heating blanket offered as a package or individually. 120VAC, 60 Hz, 1.38A electrical requirement with supplied 8′ GFCI power cord. Voltage and Haz Loc options available. CSA certified for NEMA/Type 3R in ordinary locations, and to ANSI/ISEA Z358.1

The newly retooled Haws 7501T compact portable tempered eyewash ideal for remote locations. The 9-gallon (34 L), gravity-fed, eyewash uses a heated, insulated blanket to provide ANSI compliant tempered potable water in operating temperatures between -20° F (-30° C) and 100° F (38° C) for locations without access to a continuous potable water source. 120VAC, 60Hz, 1.38A electrical requirement with supplied 8′ power cord. This unit is a cost-effective solution ideal for locations without access to potable water, including temporary decontamination sites, temporary treatment facilities, and short-term job sites.

• A wide-fill opening with a securely threaded cap, and a pronounced “Max Fill” line that permits easy inspection, cleaning and filling
• FDA approved high-density green polyethylene tank that is easily activated by pulling the yellow activation arm down to the open position
• Ease of relocation due to “Lift Here” graphics, easily mounted bracket (included) and light design
• Measurements: 16″ high, 24″ wide, 12″ deep (36.8 x 55.9 x 25.7 cm). *Note: Unit must be wall hung

QPS-C-US-Certified-Electrical-Safety for NEMA/Type 3R in ordinary locations, and to ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment, which is clearly called out on the exterior of the unit.

Model 6800 In-wall floor mounted fixture carrier: Two 2½” x 1½” x 1/8” thick structural steel uprights having 6” x 3″ x 3/8” thick welded steel 4-bolt floor flanges, supplied with ‘U’ bolts and hardware. For use in conjunction with Haws in-wall mounting plates 6700, 6700.4, 6710, 6715, 6717, or 6776, for extra heavy duty fixture support. Fits inside standard 2” x 4” wall construction. Suitable for use with either 3/8″ or 1/2″ concrete anchors (by others). Includes mounting holes for plumbing stub out bracket and electrical boxes. Exceeds requirements when tested in accordance to ASME Standard A112.6.1M. Design was independently verified as suitable to meet HCAI and CBC anchor spacing requirements.

Trouble viewing this website?

Without an up-to-date browser, you may have trouble with some of our features.

Update Now

Edge

Firefox

Chrome