Model 6428-C replacement filter twelve-pack is used with the Haws 1200 series water coolers. They are carbon block filter cartridges with a service life of 1 year/3000-gallons (11356 L). Each filter contains an on-board chip to store total gallon usage; this chip interfaces with an Electronic Lifecycle Control system to allow water flow only until the filter reaches its total gallon capacity. Tested and certified by CSA against NSF/ANSI Standard 42 for the reduction of chlorine (taste and odor) and against NSF/ANSI Standard 53 for the reduction of lead and cysts.

Model 5017LF drinking faucet is designed with a shielded bubbler and self-closing push button with adjustable stream regulation to provide an anti-squirt drinking stream. Unit is to be mounted from sink or counter top and is constructed from a lead-free polished chrome-plated brass, making this bubbler valve resistant to corrosive materials and easy to keep clean.

• Drinking faucet includes: basin shank, locking pin, and mounting hardware
• Dimensions: 2″ (5.1 cm) high forged brass bubbler head with a 1/2″ O.D. (1.3 cm) slip-joint inlet.
• Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372,
  California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and NSF/ANSI/CAN 61.

Model 5051LF lever handle drinking faucet is designed with a shielded bubbler to provide an anti-squirt drinking stream. Unit is to be mounted from sink or counter top and is constructed from a lead-free polished chrome-plated brass, making this bubbler valve resistant to corrosive materials and easy too keep clean. Unit comes further equipped with vandal resistant pins to prevent the unit from turning.

• Dimensions: Bottom of flange to top is 6-1/2″ (16.5 cm); flange diameter is 2″ (5.1 cm)
• Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372,
  California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and NSF/ANSI/CAN 61.

Model 5054LF drinking faucet is designed with a shielded bubbler and self-closing lever handle valve with pressure regulating flow control to provide an anti-squirt drinking stream. Unit is to be mounted from a sink or counter top and is constructed from lead-free polished chrome-plated brass, making this bubbler valve resistant to corrosive materials and easy too keep clean.

• Drinking faucet includes: basin shank, locking pins, and valve mounting hardware
• Dimensions: 2″ (5.1 cm) high forged brass bubbler head with a 1/2″ O.D. (1.3 cm) slip-joint inlet.
• Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372,
  California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and NSF/ANSI/CAN 61.

Model 5060LF drinking faucet is designed with a shielded bubbler and self-closing lever handle valve with adjustable stream regulation to provide an anti-squirt drinking stream. Unit is to be mounted vertically on 1/2″ IPS pipe and is constructed from lead-free polished chrome-plated brass, making this bubbler valve resistant to corrosive materials and easy too keep clean.

• Connection is 1/2″ IPS inlet
• Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and NSF/ANSI/CAN 61.

Model 5452HST handle and stem assembly includes a PCP handle, cap, nylon lock nut, nylon and brass thrust washers, stainless steel wave washer, PCP lever handle with set screw, bearing set, bonnet cap, bonnet washer, gland packing, gland, spring, stem, seat washer, seat washer screw, renew seat and a seat o-ring. Used on models made in 2005 and newer.

Product is compliant to California Health and Safety Code 116875 (AB 1953-2006).

Model 5452LF gooseneck faucet is designed with a .5 gpm (1.9 L) aerator and self-closing lever handle action to provide a smooth flowing stream of water. Unit is to be mounted from sink or counter top and is constructed from lead-free polished chrome-plated brass, making this faucet resistant to corrosive materials and easy too keep clean.

• Dimensions: Center supply to center spout outlet is 4-1/2″ (11.4 cm), bottom of flange to extreme top of faucet is 10-3/8″ (26.3 cm), bottom of flange to spout outlet is 6-3/16″ (16 cm), flange diameter is 2″ (5.1 cm), shank diameter is 13/16″ (2.1 cm). Connection is a 1/2″ O.D. (1.3 cm) slip-joint inlet
• Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and NSF/ANSI/CAN 61: Q ≤ 1.

Model 5510LF compression gooseneck faucet is designed with a .5 gpm (1.9 L) aerator and stay-open lever handle action to provide a smooth flowing stream of water. Unit is to be mounted from sink or counter top and is constructed from lead-free polished chrome-plated brass, making this faucet resistant to corrosive materials and easy to keep clean.

• Gooseneck faucet incorporates: renewable seat, mounting pin to prevent base from turning, aerator with key, and integral basin shank
• Dimensions: Center supply to center spout outlet is 4-1/2″ (11.4 cm), bottom of flange to extreme top of faucet is 10-3/8″ (26.3 cm), bottom of flange to spout outlet is 6-3/16″ (16 cm), and flange diameter is 2″ (5.1 cm). Connection is a 1/2″ O.D. (1.3 cm) slip-joint inlet
• Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and NSF/ANSI/CAN 61: Q ≤ 1.

Model 5551 glassfiller faucet is designed with a self-closing lever handle valve to control the flow of the cold stream of water. Unit is to be mounted from sink or counter top and is constructed from a lead-free polished chrome-plated brass. Making this bubbler valve resistant to corrosive materials and easy too keep clean.

• Dimensions: Bottom of flange to spout outlet is 8-1/8″ (20.6 cm); flange diameter is 1-1/4″ (3.2 cm); and c-supply to c-spouts 1-11/16″ (4 cm). Connection is a 3/8″ NPT inlet.
• Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and NSF/ANSI/CAN 61: Q ≤ 1.

Model 5701 solid brass bubbler head is designed with a shielded bubbler incorporating an anti-squirt angled drinking stream. Combining the constructed lead-free solid forged brass with a polished chrome-plated finish, this bubbler is sure to last.

• Angled stream discourages direct mouth contact making the drinking area much more sanitary.
• Dimensions: Height is 3″ (7.6 cm). Connection is a 1/4″ NPT inlet.
• Haws manufactures drinking fountains and electric water coolers to be lead-free by all known definitions including NSF/ANSI Standard 61, Section 9, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006).

Model 5701SL solid brass bubbler head is designed with a shielded bubbler incorporating an anti-squirt angled drinking stream. Combining the constructed lead-free solid forged brass with a polished chrome-plated finish, this bubbler is sure to last. Unit comes further equipped with vandal-resistant mounting slot and lock washer to be used when mounting.

• Angled stream discourages direct mouth contact making the drinking area much more sanitary.
• Dimensions: Height is 3″ (7.6 cm). Connection is a 1/4″ inlet.
• Note: Unit does not include mounting hardware. If needed please see Model 5720.
• Haws manufactures drinking fountains and electric water coolers to be lead-free by all known definitions including NSF/ANSI Standard 61, Section 9, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006).

Model 5703M solid brass bubbler head is designed with a shielded bubbler incorporating an anti-squirt angled drinking stream. Combining the solid forged brass with a polished chrome-plated finish, this bubbler is sure to last. Unit comes further equipped with lock nut and washers to be used when mounting.

• 100% lead-free waterways
• Angled stream discourages direct mouth contact making the drinking area much more sanitary
• Dimensions: Height is 3″ (7.6 cm). Connection is a 3/8″ compression inlet
• Haws manufactures drinking fountains and electric water coolers to be lead-free by all known definitions including NSF/ANSI Standard 61, Section 9, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006)

Trouble viewing this website?

Without an up-to-date browser, you may have trouble with some of our features.

Update Now

Edge

Firefox

Chrome