Model 5881PBA is a polished chrome-plated brass push button assembly that delivers the push of air for the 5881 fountain valve.
6250LF – Faucet ValveModel 6250LF bib faucet is for use on some Haws pedestal fountains shall include a polished chrome-plated brass lever handle valve with integral mounting flange, mounting hardware and fittings, and 3/8″ NPT inlet.
- (A special access plate is needed if used with 3511, and part 0004499489 is required when used with Haws cement products)
- Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and NSF/ANSI/CAN 61: Q ≤ 1.
6252EHLF – Faucet Valve
Model 6252EHLF bib faucet is designed with a self-closing lever action and requires less then 3.5 pounds (1.6 kg) to activate. Combining the lead-free design, with a rough brass finish, this faucet is built to last in outdoor environments. Unit also comes equipped with extended lever handle for ease of use.
- Connection is 1/2″ NPT inlet.
- Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and NSF/ANSI/CAN 61: Q ≤ 1.
Model 6252HST is a handle and stem assembly for the 6252EHLF valve and shall include an extended lever handle and handle cap. Completely assembled with all supporting parts, and ready to install on valves 2005 and newer. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006).
6275 – Faucet ValveModel 6275 compression hose bib faucet is designed to activate through a turn knob on the top of the unit. Connection is 3/4″ male hose thread x 1/2″ NPT inlet.
6394 – Flow ControlModel 6394 flow control is engineered to provide a proper drinking stream height at pressures varying from 30 – 90 psi (2.1 – 6.2 bar). It is important that the flow control selected match the bubbler orifice. Lead-free Tellurium copper coupling with .4 gpm (1.5 L) flow rate. Includes cone, friction washers and slip joint nut. 9/16″ (1.4 cm) OD inlet x 1/2″ NPT(F) outlet. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006).
6422 – Water FilterModel 6422 quick change replacement filter cartridge provides great tasting “polished” water for Haws model 2000 HYDRATION STATION®. The carbon based filter effectively reduces unwanted tastes and odors, including chlorine taste & odor, and is designed for easy installation and cartridge change. A quarter-turn of the filter removes it from its housing, automatically shutting off the water supply, eliminating the need for shut-off valves to and from the filter system.
- Convenient quick change feature makes it easy to remove, easy to install.
- Effective unwanted taste & odor and chlorine & odor reduction.
- 2500 gallon (9463 L)filter life.
Product is compliant to California Health and Safety Code 116875 (AB 1953-2006).
6423 – Hydration By Hawsâ„¢ Replacement FilterModel 6423 replacement filter is used with the Hydration By Hawsâ„¢ bottle filling stations. It is a carbon block filter cartridge with a service life of 1 year/2,500-gallons (9463 L). Filter contains an onboard chip to store total gallon usage; this chip interfaces with an Electronic Lifecycle Control system to allow water flow only until the filter reaches its total gallon capacity. Tested and certified by CSA against NSF/ANSI Standard 42 for the reduction of chlorine (taste and odor) and against NSF/ANSI Standard 53 for the reduction of lead and 99.99% of cysts.
6424 – Brita® Hydration Station® Water FilterModel 6424 Brita® Hydration Station® replacement filter cartridge is used on models 2000 and 2000SM systems which are tested and certified by CSA International against NSF/ANSI Standard 42 for the reduction of chlorine (taste and odor) and against NSF/ANSI Standard 53 for the reduction of lead and cysts. It is a 2,500 gallon (9463 L) capacity carbon block filter cartridge.
6425 – Water FilterHaws model 6425 Activated Carbon granule filter removes chlorine taste and odor, and water born sediment. Polypropylene filter housing is 2″ (5.1 cm) in diameter by 6″ (15.2 cm) long, 3/8″ NPTF inlet and outlet. Rated for .5 gpm (1.9 L) and has a 1000 gallon capacity. This filter protects the water flow for one bubbler, two filters are required for Hi-Low, dual-height or multi-bubbler drinking fountains.
Haws manufactures drinking fountains and electric water coolers to be lead-free by all known definitions including ANSI/NSF Standard 61, Section 9, California Proposition 65 and the Federal Safe Drinking Water Act.
6426 – Water FilterModel 6426 is a lead removal 10″ x 2″ (25.4 x 5.1 cm) in-line filter with 1/4″ NPTF inlet and outlet. Reduces lead from incoming water to levels below 15 ppb (@ flow rate = 0.5 gpm (1.3 L); pressure = 60 psi (4.2 bar)) for up to 500 gallons (1893 L). Filters particulate lead to 10 microns and absorbs soluble lead. Maximum flow of .5 gpm (1.9 L). Therefore, only one bubbler may be operated at a time on dual units. Does not leach lead once absorbed. Performance demonstrated under NSF Standard 53 and 42 by independent, certified testing laboratory.
Haws manufactures drinking fountains and electric water coolers to be lead-free by all known definitions including NSF/ANSI Standard 61, Section 9, California Proposition 65 and the Federal Safe Drinking Water Act.
6428 – 3000 Gallon Replacement Water FilterModel 6428 replacement filter is used with the RIVIVEâ„¢ series and Haws 1200F series water coolers, and many indoor and outdoor fountains. It is a carbon block filter cartridge with a service life of 1 year/3000-gallons (11356 L). For the 1200F series, the filter contains an onboard chip to store total gallon usage; this chip interfaces with an Electronic Lifecycle Control system to allow water flow only until the filter reaches its total gallon capacity.
Tested and certified by CSA against
- NSF/ANSI Standard 42 for the reduction of chlorine (taste and odor)
- NSF/ANSI Standard 53 for the reduction of lead and cysts.