Model 7612LH sink or deck mounted eye/face wash features the medically acclaimed AXION MSR stainless steel eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain. When not in use, this unit utilizes a swing-away feature so the area stays clear for everyday use.
- A dust cover allows the 7612LH to stay protected from debris when not in use
- Eyewash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
- Requires minimal maintenance and is equipped with test card to record weekly testing
- Counter top mounted on the left side of a sink
- ANSI/ISEA Z358.1 tempering compliance options
Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment
7620 – Faucet-Mounted Eyewash AXION® eyePOD®Model 7620 AXION eyePOD faucet mounted eyewash incorporates the revolutionary inverted flow design, which is the only one the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctor office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain. The symmetrical ‘pod’ look of the eyewash is constructed of stainless steel and given a polished finish for a durable, esthetically pleasing piece of emergency equipment that can be used for industrial situations and doctors offices alike.
- Eyewash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
- Thermostatic shutoff to protect the user from water over 100° F (37.8° C) by shutting off the eyewash
- Supplied with a standard 55/64-27 female connection. Have a different size? Haws has that covered also with 4 other of the most commonly used faucet adapters including a 15/16-27 male, 13/16-27 male, 3/8-18 male and 13/16-24 female, to accommodate most home, commercial and lab faucet applications
- Also supplied is a 1 gpm (3.8 L) laminar flow faucet outlet for locations where a precise flow pattern is needed
- Dim; Diameter 3.5 in. (8.9 cm), height (from top to faucet outlet) 2 in. (5 cm)
- ANSI-Compliant eyePOD Activation Demo Video
Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment.
7612 – AXION® MSR Sink Mount Eye/Face WashModel 7612 sink or deck mounted eye/face wash features the medically acclaimed AXION MSR stainless steel eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain. When not in use, this unit utilizes a swing-away feature so the area stays clear for everyday use.
- A Dust cover allows the 7612 to stay protected from debris when not in use
- Eyewash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
- Requires minimal maintenance and is equipped with test card to record weekly testing
- Side mount design allows the unit to be mounted from the right side of the sink
- ANSI/ISEA Z358.1 tempering compliance options
Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment
7611 – AXION® MSR Sink Mount Eye/Face WashThe Haws 7611 swing-away eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain.
- Dust cover allows for the 7611 to stay protected from debris when not in use
- Eyewash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
- Requires minimal maintenance and is equipped with test card to record weekly testing
- Can be re-configured on-site to be left-hand operation
- ANSI/ISEA Z358.1 tempering compliance options
Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment
7610S – AXION® MSR Sink Mount Eye/Face WashThe Haws 7610S ADA accessible wall or deck mount pull down eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain.
- Unit can be deck or wall mounted with easy change-over instructions
- Eye/face wash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
- Dust cover allows for the 7610S to stay protected from debris when not in use
- Wheelchair accessible when properly installed
- Activation and deactivation occur at a 30-degree angle from horizontal limiting splash of water onto counter or wall
- Rear mount design allows the sink to remain open to other uses
- ANSI/ISEA Z358.1 tempering compliance options
Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment.
7610 – AXION® MSR Sink Mount Eye/Face WashThe Haws 7610 ADA accessible wall or deck mount pull down eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain.
- Unit can be deck or wall mounted with easy change-over instructions
- Extended-length pull down arms are designed to accommodate wheelchair access
- Eye/face wash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
- Dust cover allows for the 7610 to stay protected from debris when not in use
- Activation and deactivation occur at a 30 degree angle from horizontal limiting splash of water onto counter or wall
- Rear mount design allows the sink to remain open to other uses
- For sinks this model will not fit over, the 13 inch drop-down length of the Haws model 7610S fits nicely into most standard sinks.
- ANSI/ISEA Z358.1 tempering compliance options
Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment.
7260B-7270B – AXION® MSR Wall Mount Eye/Face WashModel 7260B-7270B wall mounted eye and face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain.
- Eyewash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
- Unit features a round 11″ (27.9 cm) green ABS plastic receptor and aluminum wall bracket for long life
- Includes a mesh in-line strainer to collect line debris, and ball valve with stainless steel ball and stem for durability
- Supply: 1/2″ NPT. Waste: 1- 1/4″ NPT
- ANSI/ISEA Z358.1 tempering compliance options
Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment.
Due to technology advancements these two models are now the same.
7460 – AXION® MSR Unmounted Eye/Face WashModel 7460 unmounted eye and face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain.
- Eyewash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
- Features a round 11″ (27.9 cm) stainless steel receptor
- Includes a mesh in-line strainer to collect line debris, and ball valve with stainless steel ball and stem for durability
- Supply: 1/2″ NPT. Waste: 1- 1/4″ NPT
- ANSI Z358.1 tempering compliance options
Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.
7433FP – Freeze Protected Wall Mount EyewashHaws emergency eyewash systems, like the freeze protected 7433FP, use anti-surge Soft-Flo heads that activate with the push of a stainless steel flag. Heads come equipped with pop-off dust covers, so when debris is present, the irrigation process stays protected. Space efficient design and integral wall bracket allow the 7433FP to be mounted in a number of easily accessible locations.
- A great addition to multiple unsafe environments where the eyes may be exposed to corrosive materials
- Easily detected and maintained, emergency equipment is equipped with safety sign and test card to record weekly testing
- Reducing installation time, eyewash and valve assembly is pre-built and fully water/pressure tested
- Fully functional in freezing environments when installed properly
- All unused water drains out of the unit through a drain valve behind the wall
- Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment
Model 7361-7461 pedestal mounted eye and face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain.
- Eyewash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
- Features a round 11″ (27.9 cm) stainless steel receptor and 1-1/4″ NPT galvanized stanchion
- Includes a mesh in-line strainer to collect line debris, and ball valve with stainless steel ball and stem for durability
- Supply: 1/2″ NPT. Waste: 1- 1/4″ NPT
- ANSI/ISEA Z358.1 tempering compliance options
Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment.
Due to technology advancements these (two models) are now the same.
7360BTWC – AXION® MSR Barrier-Free Eye/Face WashThe Haws 7360BTWC barrier-free emergency eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain. Unit is equipped with an in-line 50 x 50 mesh water strainer and flip top dust covers, so when debris is present, the irrigation process stays protected. Space efficient design allows the 7360BTWC to be mounted in a number of easily accessible locations while providing a barrier-free standard.
-
- Low profile design accommodates wheelchair access
- Eyewash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
- Reducing installation time, eye/face wash and valve assembly is pre-built and fully water/pressure tested. Unit also comes with trap and tailpiece to meet desired wall mounting requirements
- ANSI/ISEA Z358.1 tempering compliance options
Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment.
7360BT-7460BT – AXION® MSR Wall Mount Eye/Face WashModel 7360BT-7460BT wall mounted eye and face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain.
- Eyewash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
- Features a round 11″ (27.9 cm) stainless steel receptor, aluminum wall bracket and tailpiece and trap
- Includes a mesh in-line strainer to collect line debris, and ball valve with stainless steel ball and stem for durability
- Supply: 1/2″ NPT. Waste: 1- 1/2″ NPT
- ANSI/ISEA Z358.1 tempering compliance options
Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment.
Due to technology advancements these (two models) are now the same.