Model H1001.8HO-1920HO ADA vandal-resistant touchless electric water cooler and bottle filler provides 8 gph (30.3 L) chilled water performance in an engineered stainless steel skin. This wall-mounted swirl bowl designed fountain and bottle filler incorporates sensor operated stainless steel solenoid valves controlled by a transformer for hands-free operation. A pressure regulator is used to adjust the bubbler flow according to incoming water pressures. Outfitted with such protective features as vandal-resistant bubbler head, waste strainer, and bottom plate, this electric water cooler is quick to discourage vandals.

• Touchless operation for safety and peace of mind
• Vandal resistant components include the bubbler, bowl, drain and bottom plates
• 30-second obstruction time-out to reduce tampering of sensor
• 18-gauge Type 304 Stainless Steel bowl assembly mounted on a 14-gauge Type 304 Stainless Steel wall bracket
• 100% lead-free waterways
• 1 gpm (3.78 L) bottle filler laminar flow
• Grille slots are designed to eliminate sharp edges and are backed with a foam filter to protect the fan motor and high displacement compressor from debris
• Designed to run at a low energy usage, this water cooler is assured to have a long-lasting life
• Laminar flow prevents splashing, keeping the drinking area contained and clean
• Beautiful satin finish resists stains and corrosion
• The bottle filler requires a mounting plate; either the 6700 in-wall or the 6700R on-wall support plate (See options below)

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.

Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.

The Haws H1107.8HO-1920HO vandal-resistant low profile ADA electric drinking fountain and bottle filler provides 8 gph (30.3 L) chilled water performance in an engineered stainless-steel skin. This wall mounted fountain incorporates sensor operated stainless steel solenoid valves controlled by a transformer for hands-free operation. A pressure regulator is used to adjust the bubbler flow according to incoming water pressures.

• Touchless operation for safety and peace of mind
• Vandal resistant components include the bubbler, drain and bottom plates
• 30-second obstruction time-out to reduce tampering of sensor
• 100% lead-free waterways
• 1 gpm (3.78 L) bottle filler laminar flow
• 14 gauge Type 304 Stainless Steel design provides a well constructed sturdy fountain
• Grille slots are designed to eliminate sharp edges and are backed with a foam filter to protect the fan motor and high displacement compressor from debris
• Beautiful satin finish resists stains and corrosion
• Polished chrome-plated brass bubbler head with integral laminar anti-squirt flow eliminate water splash
• One-piece stamped bowl makes for an aesthetically pleasing and durable design
• The bottle filler requires a mounting plate; either the 6700 in-wall or the 6700R on-wall support plate. (See options below)

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.

Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.

The Haws H1109.8HO-1920HO ADA vandal-resistant electric drinking fountain and bottle filler provides 8 gph (30.3 L) chilled water performance in an engineered stainless-steel skin. This wall mounted fountain incorporates sensor operated stainless steel solenoid valves controlled by a transformer for hands-free operation. A pressure regulator is used to adjust the bubbler flow according to incoming water pressures.

• Touchless operation for safety and peace of mind
• Vandal resistant components include the bubbler, drain and bottom plates
• 30-second obstruction time-out to reduce tampering of sensor
• 100% lead-free waterways
• 18 gauge Type 304 Stainless Steel design provides a well constructed sturdy fountain
• Grille slots are designed to eliminate sharp edges and are backed with a foam filter to protect the fan motor and high displacement compressor from debris
• Beautiful satin finish resists stains and corrosion
• Polished chrome-plated brass bubbler head with integral laminar anti-squirt flow eliminate water splash
• One-piece stamped bowl makes for an aesthetically pleasing and durable design

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.

Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.

Model H1117LN.8HO2 ADA vandal-resistant electric drinking fountain provides 8 gph (30.3 L) chilled water performance in an engineered stainless-steel skin. This wall mounted fountain incorporates sensor operated stainless steel solenoid valves controlled by a transformer for hands-free operation. A pressure regulator is used to adjust the bubbler flow according to incoming water pressures.

• Touchless operation for safety and peace of mind
• Vandal resistant components include the bubblers, drains and bottom plates
• 30-second obstruction time-out to reduce tampering of sensor
• 100% lead free waterways
• Beautiful satin finish resists stains and corrosion
• 14 gauge Type 304 Stainless Steel design provides a well-constructed sturdy fountain
• Soft rounded corners prevent from mishaps and other accidents that may occur once the fountain is installed
• One-piece stamped bowls with low-profile basin make for an aesthetically pleasing and durable design

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.

Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.

The Haws H1117LN.8HO2-1920HO ADA vandal-resistant chilled combination touchless drinking fountain and bottle filler incorporates sensor operated stainless steel solenoid valves controlled by a transformer for hands-free operation. A pressure regulator is used to adjust the bubbler flow according to incoming water pressures.

• Touchless operation for safety and peace of mind
• Vandal resistant components include the bubblers, drains and bottom plates
• 30-second obstruction time-out to reduce tampering of sensor
• 1 gpm (3.78 L) bottle filler laminar flow
• Beautiful satin finish resists stains and corrosion
• 14 gauge Type 304 Stainless Steel design provides a well-constructed sturdy fountain
• Soft rounded corners prevent from mishaps and other accidents that may occur once the fountain is installed
• One-piece stamped bowls with low-profile basin make for an aesthetically pleasing and durable design
• The bottle filler requires a mounting plate; either the 6700 in-wall or the 6700R on-wall support plate. (See options below)

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.

Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.

The Haws H1119.8HO2-1920HO ADA vandal-resistant drinking fountain and bottle filler incorporates sensor operated stainless steel solenoid valves controlled by a transformer for hands-free operation. A pressure regulator is used to adjust the bubbler flow according to incoming water pressures.

• 100% lead-free waterways
• Vandal resistant components include the bubblers, drains and bottom plates
• Touchless operation for safety and peace of mind
• 30-second obstruction time-out to reduce tampering of sensor
• 18 gauge Type 304 Stainless Steel design provides a well constructed sturdy fountain
• 1 gpm (3.78 L) bottle filler laminar flow
• Beautiful satin finish resists stains and corrosion
• “Hi-Lo” design allows for twice the users as regular fountains and suits the needs for various user heights
• Soft rounded corners prevent from mishaps and other accidents that may occur once the fountain is installed
• One-piece stamped bowls make for an aesthetically pleasing and durable design
• The bottle filler requires a mounting plate; either the 6700 in-wall or the 6700R on-wall support plate. (See options below)

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.

Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.

The Haws H1117LN.8-1920 ADA vandal-resistant chilled drinking fountain and bottle filler uses patented stainless steel, push-button activated, valve assemblies allowing for front access stream adjustment as well as cartridge and strainer access. This wall mounted fountain offers the ‘only’ all stainless-steel valve body that is machined out of solid bar stock, is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer, and has front access to the water stream height adjustment for easy maintenance without having to remove the valve.

• Only stainless steel valve body that is machined out of solid bar stock
• 100% lead free waterways
• Vandal resistant components include the bubblers, buttons, drains and bottom plates
• 1 gpm (3.78 L) bottle filler laminar flow
• Maintenance is made easy with front access to valve adjustment and cartridge replacement
• Beautiful satin finish resists stains and corrosion
• 14 gauge Type 304 Stainless Steel design provides a well-constructed sturdy fountain
• Soft rounded corners prevent from mishaps and other accidents that may occur once the fountain is installed
• One-piece stamped bowls with low-profile basin make for an aesthetically pleasing and durable design
• The bottle filler requires a mounting plate; either the 6700 in-wall or the 6700R on-wall support plate. (See options below)

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.

Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.

Model H1011.8HPS-1920HPS ADA vandal-resistant electric drinking fountain and bottle filler provides 8 gph (30.3 L) chilled water performance in an engineered polished stainless steel skin. This wall-mounted swirl bowl designed fountain offers the only all stainless-steel valve body that is machined out of solid bar stock, is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer, and has front access to the water stream height adjustment for easy maintenance without having to remove the valve. Outfitted with such protective features as vandal-resistant bubbler heads, waste strainer, and bottom plates, these electric water coolers are quick to discourage vandals.

• Only stainless steel valve body that is machined out of solid bar stock
• 18-gauge Type 304 high-polished stainless steel bowl assembly mounted on a 14-gauge Type 304 high-polished stainless steel wall bracket
• Vandal resistant components include the bubblers, bowls, buttons, drains and bottom plates
• 100% lead-free waterways
• 1 gpm (3.78 L) bottle filler laminar flow
• Grille slots are designed to eliminate sharp edges and are backed with a foam filter to protect the fan motor and high displacement compressor from debris
• Designed to run at a low energy usage, this water cooler is assured to have a long-lasting life
• Laminar flow prevents splashing, keeping the drinking area contained and clean
• Maintenance is made easy with front access to valve adjustment and cartridge replacement
• Beautiful polished finish resists stains and corrosion
• The bottle filler requires a mounting plate; either the 6700 in-wall or the 6700R on-wall support plate. (See options below)

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.

Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.

The Haws H1117LN.8 ADA vandal-resistant chilled drinking fountain uses patented stainless steel, push-button activated, valve assemblies allowing for front access stream adjustment as well as cartridge and strainer access. This wall mounted fountain offers the ‘only’ all stainless-steel valve body that is machined out of solid bar stock, is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer, and has front access to the water stream height adjustment for easy maintenance without having to remove the valve.

• Only stainless steel valve body that is machined out of solid bar stock
• 100% lead free waterways
• Vandal resistant components include the bubblers, buttons, drains and bottom plates
• Maintenance is made easy with front access to valve adjustment and cartridge replacement
• Beautiful satin finish resists stains and corrosion
• 14 gauge Type 304 Stainless Steel design provides a well-constructed sturdy fountain
• Soft rounded corners prevent from mishaps and other accidents that may occur once the fountain is installed
• One-piece stamped bowls with low-profile basin make for an aesthetically pleasing and durable design

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.

Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.

Model H1011.8-1920 vandal-resistant electric ADA water cooler and bottle filler provides 8 gph (30.3 L) chilled water performance in an engineered stainless steel skin. This wall-mounted swirl bowl designed fountain offers the only all stainless-steel valve body that is machined out of solid bar stock, is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer, and has front access to the water stream height adjustment for easy maintenance without having to remove the valve.

• Only stainless steel valve body that is machined out of solid bar stock
• 18-gauge Type 304 Stainless Steel bowl assembly mounted on a 14-gauge Type 304 Stainless Steel wall bracket
• Vandal resistant components include the bubblers, bowls, buttons, drains and bottom plates
• 100% lead-free waterways
• 1 gpm (3.78 L) bottle filler laminar flow
• “Hi-lo” design allows for twice the users as regular fountains and suits the needs for various user heights
• Grille slots are designed to eliminate sharp edges and are backed with a foam filter to protect the fan motor and high displacement compressor from debris
• Easy maintenance with front access to valve adjustment and cartridge replacement
• Designed to run at a low energy usage, this water cooler and fountain are assured to have a long-lasting life
• Laminar flow prevents splashing, keeping the drinking area contained and clean
• Beautiful satin finish resists stains and corrosion

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.

Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.

The Haws 1210SF wall-mount filtered ADA bottle filling station is the newest addition to the most comprehensive hydration offering in the industry. The modern, innovative design is tailored to meld with office spaces, universities and airports, or serve the functional needs of spaces like a school gymnasium. Sensor activated bottle filler allows for hands free operation, and intuitive LED electronic display keeps the user informed with how many plastic bottles have been saved. Fresh, always filtered water with the Electronic Lifecycle Control feature shuts water flow off when filter reaches its gallons capacity. Flow will begin again when filter is replaced.

• Energy-Efficient Refrigeration Evaporator: Enhanced tankless evaporator coil using thermal mass cooling technology, with 100 percent water content flushed with every use
• Hygienic hands-free sensor operated bottle filler with vandal-resistant sensor that resists scratching and water droplet fowling
• Auto-purge feature automatically cycles once every 24 hours to assure a fresh water supply as well as trap integrity
• LED illuminated bottle fill area
• Quick 1.1 GPM fill rate (depending on incoming pressure) for bottle filler
• Smart energy savings feature powers down refrigeration system after 2 hours of non-use, and will automatically start again when used
• Programmable to be shut-down during planned facility closures, weekends, etc.
• High traffic area ready with a 3000-gallon (11,356 L) capacity filter
• Raised platform for easy bottle resting and filling
• Durable, easy to clean 304 stainless-steel skin
• Retrofit installation compatibility over many existing water coolers
• 100% lead free waterways
• Galvanized steel frame
• Rated for indoor use
• Designed and assembled in the USA

CSA certified to comply with NSF/ANSI 42, NSF/ANSI 53, NSF/ANSI/CAN 61: Q ≤ 1, NSF/ANSI/CAN 372, ASME A112.18.1/CSA B125.1, UL 399 and CSA C22.2 No. 120. ADA compliant to ICC A117.1, CSA B651, DOJ’s 2010 ADA Standards for Accessible Design when properly installed. ASHRAE 18 compliant chilling capacity. FCC ID: 2AUAN-1200SM and IC: 25359-1200SM

Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine), and failure to heed these conditions may void warranty.

The Haws 1210S indoor wall-mount ADA bottle filler is the newest addition to the most comprehensive hydration offering in the industry. The modern, innovative design is tailored to meld with office spaces, universities and airports, or serve the functional needs of spaces like a school gymnasium. Sensor-activated bottle filler allows for hands-free operation, and intuitive LED electronic display keeps the user informed with how many plastic bottles have been saved.

• Energy-Efficient Refrigeration Evaporator: Enhanced tankless evaporator coil using thermal mass cooling technology, with 100 percent water content flushed with every use
• Hygienic hands-free sensor operated bottle filler with vandal-resistant sensor that resists scratching and water droplet fowling
• Auto purge feature automatically cycles once every 24 hours to assure a fresh water supply as well as trap integrity
• LED illuminated bottle fill area
• Quick 1.1 GPM fill rate (depending on incoming pressure) for bottle filler
• Smart energy savings feature powers down refrigeration system after two hours of non-use, and will automatically start again when used
• Programmable to be shut-down during planned facility closures, weekends, etc.
• Raised platform for easy bottle resting and filling
• Durable, easy-to-clean 304 stainless-steel skin
• Retrofit installation compatibility over many existing competitor water coolers
• 100% lead free waterways
• Galvanized steel frame
• Rated for indoor use
• Designed and assembled in the USA

CSA certified to comply with NSF/ANSI/CAN 61: Q ≤ 1, NSF/ANSI/CAN 372, ASME A112.18.1/CSA B125.1, UL 399 and CSA C22.2 No. 120. ADA compliant to ICC A117.1, CSA B651, DOJ’s 2010 ADA Standards for Accessible Design when properly installed. ASHRAE 18 compliant chilling capacity. FCC and CAN ICES – 3(A)/NMB-3(A).

Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine), and failure to heed these conditions may void warranty.

Trouble viewing this website?

Without an up-to-date browser, you may have trouble with some of our features.

Update Now

Edge

Firefox

Chrome