The Haws 9400 AXION® Steam Water Heater replaces hot water tanks when pressurized steam is available. When an emergency shower or eyewash is activated, the flow of water opens a steam control valve. The steam enters a brazed plate heat exchanger, instantly heating the water. This mixing valve blends hot and cold water to produce an output of 80° F (27° C ) tepid water. Additional valves keep the system preheated, freeze protected and scald protected. The steam valve will remain closed should there be a loss of water pressure. This station complies with the ANSI Z358.1 standard and mixing valve is designed to meet ASSE 1071
- For important installation information, please read Scald Warning.
Haws Model 8317CTFPC1D1 heat traced combination shower and eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain. AXION MSR also offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets. Virtually eliminating mishaps, the unit’s safety features include: a thermal actuator bleed valve, 120V thermostat cable double wrapped piping, 3/4″ (1.9 cm) insulation surrounding piping and UV protected outside jacket to prevent freezing, as well as a universal emergency sign.
- Perfect for extreme weather conditions dropping down to -30° F (-34.4° C)
- Eyewash streams provide Zero Vertical Velocityâ„¢ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
- Universal design allows for top or bottom water supply
- Requires minimal maintenance and is equipped with test card to record weekly testing
- Reducing installation time, entire unit is pre-built and fully pressure tested
- Solid stainless steel pipe stanchion and galvanized fittings make for one sturdy piece of corrosive resistant equipment
- Rated Class 1, Div 1, Group B, C & D. Tempering code T6
Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment. Model is CSA electrical certified.
8317CTFP.220V – AXION® MSR Freeze Protected Shower and Eye/Face WashHaws Model 8317CTFP.220V heat traced combination shower and eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain. AXION MSR also offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets. Virtually eliminating mishaps, the unit’s safety features include: a thermal actuator bleed valve, 220V thermostat cable double wrapped piping, 3/4″ (1.9 cm) insulation surrounding piping and UV protected outside jacket to prevent freezing, as well as a universal emergency sign.
- Perfect for extreme weather conditions dropping down to -30° F (-34.4° C)
- Eyewash streams provide Zero Vertical Velocityâ„¢ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
- Universal design allows for top or bottom water supply
- Requires minimal maintenance and is equipped with test card to record weekly testing
- Reducing installation time, entire unit is pre-built and fully pressure tested
- Solid stainless steel pipe stanchion and galvanized fittings make for one sturdy piece of corrosive resistant equipment
- Rated Class 1, Division 2, Group B, C and D
Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment. Model is CSA electrical certified, TYPE 4. (Nema 4 equivalent)
8317CTFP – AXION® MSR Freeze-Protected Shower and Eye/Face WashHaws Model 8317CTFP heat traced combination shower and eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain. AXION MSR also offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets. Virtually eliminating mishaps, the unit’s safety features include: a thermal actuator bleed valve, 120V thermostat cable double wrapped piping, 3/4″ (1.9 cm) insulation surrounding piping and UV protected outside jacket to prevent freezing, as well as a universal emergency sign.
- Perfect for extreme weather conditions dropping down to -30° F (-34.4° C)
- Eyewash streams provide Zero Vertical Velocityâ„¢ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
- Universal design allows for top or bottom water supply
- Requires minimal maintenance and is equipped with test card to record weekly testing
- Reducing installation time, entire unit is pre-built and fully pressure tested
- Solid stainless steel pipe stanchion and galvanized fittings make for a sturdy piece of corrosive resistant equipment
- Rated Class 1, Div 2, Group B, C & D. Temperature code T6
Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment. Model is QPS-C-US Certified, TYPE 4. (Nema 4 equivalent)
8300FP – Emergency Freeze Protected Shower and EyewashThe Haws freeze protected 8300FP combines the use of an ABS showerhead and anti-surge Soft-Flo eyewash heads for the irrigation process. Emergency combination unit is equipped with pop-off dust covers, so when debris is present, the irrigation process stays protected. Virtually eliminating mishaps, the unit’s safety features include: universal emergency sign, high visibility stripe, and two labeled push plates.
- A great addition to unsafe environments where the eyes and body may be exposed to corrosive materials
- All unused water drains out of the unit through drain valves in the ground below the frost line
- Requires minimal maintenance and is equipped with test card to record weekly testing
- Reducing installation time, eyewash is pre-built and fully water/pressure tested
- Solid galvanized steel construction make for one sturdy piece of emergency equipment
Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment.
8300.158 – AXION® MSR Emergency Shower and EyewashThe Haws 8300.158 combines the use of a hydrodynamic ABS showerhead and anti-surge Soft-Flo eyewash heads for the irrigation process. Virtually eliminating mishaps, the unit’s safety features include: pop-off eyewash dust covers, universal emergency sign, high visibility stripe, and a thermal actuator bleed valve to protect from temporary internal freezing.
- Hydrodynamic ABS plastic drench showerhead with flow control delivers dispersed flow for uniform drenching
- A great addition to unsafe environments where the eyes and body may be exposed to corrosive materials
- Requires minimal maintenance and is equipped with test card to record weekly testing
- Reducing installation time, eyewash and valve assembly is pre-built and fully water/pressure tested
- Solid galvanized steel construction make for one sturdy piece of emergency equipment
- Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment
Model 8111FP AXION MSR freeze protected drench shower (patent pending) offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim of normal showerheads, making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets. Virtually eliminating mishaps, this unit’s safety features include a universal emergency sign, and valve installation that protects unit from freezing.
- A great addition to multiple potentially unsafe environments where the body may be exposed to corrosive materials
- AXION MSR ABS plastic drench showerhead with flow control delivers dispersed flow for uniform drenching
- Requires minimal maintenance and is equipped with test card to record weekly testing
- Reducing installation time, valve assembly is pre-built
Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment.
7603T – 120V Portable Air-Pressurized Tempered Emergency EyewashThe Haws 7603T is an ideal, cost-efficient solution for a facility’s ANSI eyewash requirements in locations without access to a continuous potable water source. The pressurized 15 gallon (56.8 L) portable eyewash uses a NEMA 3R heated, insulated blanket to provide ANSI compliant tempered water in operating temperatures between -20° F (-30° C) and 100° F (38° C) for locations without access to a continuous potable water source.
- Features a 15 gallon (56.8 L) stainless steel tank
- Upgraded ball valves with stainless steel ball and stem
- Protective measures include: air pressure gauge, pressure relief valve, and tire-type air fill valve
- Power cord included
- Measurements: 39-1/2″ (100.3 cm) high, 16″ (40.6 cm) diameter
- QPS-C-US-Certified-Electrical-Safety for NEMA/Type 3R in ordinary locations, and to ANSI/ISEA Z358.1
The newly retooled Haws 7501T compact portable tempered eyewash ideal for remote locations. The 9-gallon (34 L), gravity-fed, eyewash uses a heated, insulated blanket to provide ANSI compliant tempered potable water in operating temperatures between -20° F (-30° C) and 100° F (38° C) for locations without access to a continuous potable water source. 120VAC, 60Hz, 1.38A electrical requirement with supplied 8′ power cord. This unit is a cost-effective solution ideal for locations without access to potable water, including temporary decontamination sites, temporary treatment facilities, and short-term job sites.
- A wide-fill opening with a securely threaded cap, and a pronounced “Max Fill” line that permits easy inspection, cleaning and filling
- FDA approved high-density green polyethylene tank that is easily activated by pulling the yellow activation arm down to the open position
- Ease of relocation due to “Lift Here” graphics, easily mounted bracket (included) and light design
- Measurements: 16″ high, 24″ wide, 12″ deep (36.8 x 55.9 x 25.7 cm). *Note: Unit must be wall hung
QPS-C-US-Certified-Electrical-Safety for NEMA/Type 3R in ordinary locations, and to ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment, which is clearly called out on the exterior of the unit.
7500EB – Portable Self Contained Heated EyewashHaws heated portable Model 7500EB is ideal for remote locations. Using gravity to supply a continuous flow of clean water to injured personnel for a full 15 minutes at .4 gpm (1.5 L), this model is a reliable source for safety. The 7500’s full patterned flushing feature is capable of being used in sub-freezing temperatures.
- Featuring a FDA approved high-density green polyethylene tank easily activated by pulling the yellow activation arm down to the open position
- 1000 Watt, 120 VAC submersible thermostatically controlled heater element
- Fully functional to -30° F (-34.4° C) and should stay between 65° and 75° F (18.3 and 23.9° C)
- Model supplied with 9′ (274.3 cm) power cord, 3-prong plug, and fitted insulated protective cover
- A wide-fill opening with threaded cap permits easy inspection, cleaning and filling
- Relocation is simple due to the easily mounted (bracket included) and light design of this 16 gallon (60.6 L) portable
- Measurements: 22-1/2″ high, 21-1/2″ wide, 19-1/2″ deep (57.2 x 54.6 x 49.5 cm)
Model 7500EB is certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment.
7433FP – Freeze Protected Wall Mount EyewashHaws emergency eyewash systems, like the freeze protected 7433FP, use anti-surge Soft-Flo heads that activate with the push of a stainless steel flag. Heads come equipped with pop-off dust covers, so when debris is present, the irrigation process stays protected. Space efficient design and integral wall bracket allow the 7433FP to be mounted in a number of easily accessible locations.
- A great addition to multiple unsafe environments where the eyes may be exposed to corrosive materials
- Easily detected and maintained, emergency equipment is equipped with safety sign and test card to record weekly testing
- Reducing installation time, eyewash and valve assembly is pre-built and fully water/pressure tested
- Fully functional in freezing environments when installed properly
- All unused water drains out of the unit through a drain valve behind the wall
- Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment
The Haws 6518FR freeze-resistant valve system is a fully engineered pneumatic operated valve for use on all Haws single bubbler freeze-resistant pedestal fountains. The placement of the valve below the frost line allows the system to function when freezing conditions are present at surface level. Its fully accessible design allows for reliable service year round.
- Installed below the frost line, the valve remains fully functional under the worst of weather conditions, with the fountain remaining functional as well
- If a maintenance issue ever arises, rest assured that the valve assembly is easily removed and replaced without disrupting the remainder of the fountain
- Flow is easily adjustable with supplied regulator valve
- Unit is applicable for single pedestal mounted fountain designs
- Consult with the local authority having jurisdiction before installation in order to determine if any additional regulations or requirements may apply
Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and NSF/ANSI/CAN 61: Q ≤ 1.