Model 6608HPS is a 32″ x 9″ (81.2 x 22.9 cm) access panel designed to facilitate maintenance by allowing easier access to plumbing behind the wall. It is made of high-polished stainless steel for Model 1011HPSMS.
6611 – Sand TrapModel 6611 in ground sand trap, is designed to help prevent blockage of waste lines in pedestal drinking fountains. Installed adjacent to the fountain it collects sand and debris that can clog the drain line. Removable lid allows for easy maintenance.
Body and fittings are of hi-density black polyethylene. Cover is white polypropylene with eight stainless steel screws, cadmium plated steel anchoring nuts, rubber gasket and three anti-skid strips. Plastic collector bucket. Cover is intended for foot traffic only.
6620 – Concrete StepModel 6620 is a square concrete step that matches the color and finish of Haws concrete drinking fountains to allow children access to the drinking water stream. It is a wire reinforced square concrete step 10″ (25.4 cm) high for surface mounting. Standard color is Portland Gray cement with exposed aggregate finish. Anchor bolts supplied.
6635 – Sand TrapModel 6635 sand trap has a see through acrylic canister with lifting handle. Housed inside pedestal behind access door for easy dumping. Available on 3500, 3511 and 3600 series fountains. (This option cannot be used in conjunction with the 6250LF on Model 3511). The 6635 is not recommended for use on freeze resistant (FR) fountains unless it is removed during freezing conditions.
6700 – Mounting PlateModel 6700 is an in-wall 3/16″ thick steel mounting plate which provides the maximum support and facilitates for the installation of a single bubbler wall mounted Haws fountain or 1920 series bottle filler. Mounted prior to the finished wall, this mounting plate allows the fountain to be easily and quickly installed.
- Larger, thicker and stronger than any other mounting plate in the industry
- Steel construction provides a solid support system for Haws 1000 and 1100 series fountains.
- Measurements are 18″ W x 7″ H x 3/16″ (45.7 x 17.8 x .47 cm)
Model 6700.4 is an in-wall 3/16″ thick steel mounting plate which provides the maximum support and facilitates for the installation of “Hi-Lo”, wall mounted fountains. Mounted prior to the finished wall, this mounting plate allows the hi-lo fountains to be easily and quickly installed.
- Thicker and stronger than any other mounting plate in the industry
- Steel construction provides a solid support system for these “Hi-Lo” fountains.
- Measurements are 36″ W x 12″ H x 3/16″ (91 x 30.5 x .47 cm)
Model 6700R is an on-wall 3/16″ thick steel mounting plate is designed to aid the installation for and support of the 1920 series bottle filler on an existing wall. Plate is to be mounted on the surface of a finished wall and is concealed behind optional (or supplied) back panel.
- Thicker and stronger than any other mounting plate in the industry
- Steel construction provides a solid support system for Haws 1920, 1920HPS & 1920FR.
- Measurements are 14″ W x 7″ H x 3/16″ (35.6 x 17.8 x .47 cm)
The Haws model 6710 in-wall mounting plate for model 1441 provides the maximum support and facilitates the installation. Mounted prior to the finished wall, this mounting plate allows the fountain to be easily and quickly mounted.
- Heavy steel construction provides a solid support system
- Measurements are 36″ W x 6″ H x 1/4″ (91 x 15.2 x .6 cm)
The Haws model 6715 in-wall mounting plate provides the maximum support and facilitates the installation of “Hi-Lo”, barrier-free, 1501 series fountains. Mounted prior to the finished wall, this mounting plate allows the “Hi-Lo” fountains to be easily and quickly installed.
- Steel construction provides a solid support system for these “Hi-Lo” fountains.
- For use with model 1501 produced after Jan 1st, 2017
- Measurements are 36″ W x 14″ H x 3/16″ (91 x 35.6 x .47 cm)
Model 6429 replacement filter is used on the Brita® Hydration Station®. It is a carbon block filter cartridge with a service life of 1 year/2,500 gallon (9463 L). Filter contains an onboard chip to store total gallon usage; this chip interfaces with an electronic Lifecycle Control system to allow water flow only until the filter reaches its total gallon capacity.
- Tested and certified by CSA against NSF/ANSI Standard 42 for the reduction of chlorine (taste and odor) and against NSF/ANSI Standard 53 for the reduction of lead and 99.99% of cysts.
Model 6433 is a lead-free, celcon Y pattern water strainer with removable 100 mesh screen for easy cleaning. 1/4″ NPT(F) inlet and outlet. 1-7/8″ (4.8 cm) long with strainer arm extending to 2-15/16″ (5.6 cm) overall width.
6437 – Strainer In-Line for Haws Water CoolerThe Haws 6437 in-line Y-strainer is used for the Haws 1200 series water coolers. The Noryl plastic strainer uses a 100 mesh screen and is attached at the cold water inlet.
