Model 9015 eyewash gauge allows for easy testing of eyewashes per ANSI Standard Z358.1. Directions are in black on the clear Acrylic. Model 9015 also serves as a 6″ (15 cm) ruler.

Model 9020 ABS plastic 3-sided sign is for use on Haws combination shower and eyewash units. This large yellow ABS plastic sign with Safety Green printed stripes is visible from multiple directions. Features universal pictorial of an emergency shower and eyewash. It can be mounted on a wall for 2 way visibility, or on a shower upright for 3 sided visibility.

To be used only on combination shower and eyewash units.

The Haws 9035 three-sided enclosure provides privacy, and also protection from the elements for the user of emergency shower and eyewash equipment. This enclosure includes roof panels to protect your emergency equipment from the elements, and is spacious enough inside to meet ANSI and accessibility clearances.

• Provides shade and is wind-resistant
• Provides privacy when it is needed most
• Easily installed indoors or at outdoor job sites
• High visibility emergency UV protected signage for improved on-site safety
• Ideal for permanent or short-term job applications
• Ships in a compact wooden crate for easy transportation between job sites

Model 9037 protects your personnel by providing shower privacy for removal of contaminated clothing with our easy-to-install privacy curtain. It is designed to be used on horizontal emergency drench shower or combination emergency drench shower and eyewash units. This tyvek yellow curtain can be installed on new or previously installed models. With a quick sweep of the hand on both sides, the curtain wraps around to enclose the shower and user. Durability is provided by the corrosion resistant curtain rod. Partial water containment is provided by the curtain which helps minimize the danger of equipment damage. Privacy gown is included in the pocket of the curtain. Curtain length: 78″ (198.1 cm) diameter of Curtain Rod: 47-1/2″ (120.6 cm).

Model 9040 Privacy Curtain. This tyvek white shower curtain performs water containment and provides privacy to the employee who must disrobe in an emergency.

Model 9070 Eye Wash Filter is recommended for installation on all eyewash units for additional protection for eyes. Made of FDA approved polypropylene with disposable FDA approved viscose fiber filter media which removes particles down to 20 microns. Flow Capacity: 7 gpm (26.5 L) max (recommended). Maximum Working Pressure: 125 psi (8.62 bar) Size: 15″ (38.1 cm) overall by 5″ (12.7 cm) diameter Supply: 3/4″ NPT inlet and outlet.

Model 9070C is the replacement cartridge for Model 9070 Filter.

The Haws 8740 emergency overhead tank shower is designed for indoor installation. The ANSI/ISEA Z358.1 compliant design as a self contained shower is to be used in 60° – 100° F (16° – 38° C) ambient temperatures. Modular six piece galvanized frame is easily assembled and disassembled for flexible placement options. Frame includes mounting feet with 4 bolt holes each for increased stability, and integral forklift slots for easy mobility. This unit includes a 330-gal IBC high-density polyethylene tank, supply inlet piping, auto-fill valve for refill, breather vent and 2″ NPT ball valve integral to tank for shower piping. Adheres to International Building Code 2012. Min Fill pressure: 20 PSIG with a minimum fill flow rate of 15 GPM. Max fill pressure: 60 PSIG. Large high-visibility green and white universal signage for quick identification on three sides. Supply inlet: 1-1/4″ NPTM PVC fitting. Standard plugged pipe fitting supplied for optional AXION eye/face wash assembly. Optional model 9084 cleansing stick can be used to provide continual protection against pathogenic bacteria in the water for up to 3 years. Model 8740 is certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment. Note: This unit must be plumbed through the supply inlet for ANSI Z358.1 compliance.

The Haws 874301S eye/face wash option for the model 8740 overhead tank shower uses the medically acclaimed AXION® MSR eye/face wash head for emergency flushing. The green ABS plastic head uses an inverted directional laminar flow to sweep contaminants away from the vulnerable nasal cavity, and is protected by a yellow plastic pop-off dust cover. Assembly includes a chrome-plated brass ball valve with stainless steel ball and stem, galvanized piping and flexible polyvinyl tubing to allow it to be fitted to the 8740 by the customer. Refer to the Operation and Maintenance Manual for instructions. Eye/face wash valve is designed to make the flushing of the contaminants occur with the simple push of a stainless steel flag.

Model 8760 ePOD™ shower and eye/face wash tempering skid mixes it’s pre-heated water supply in its onboard storage tank with low temperature facility water through its Haws Tempered Water Blending System, to produce an ANSI compliant water supply for all safety equipment in the plumbed system. It shall include an aluminum channel 5′ x 5′ (1.5 x 1.5 m) frame with a composite equipment platform, with safety green chemical and UV resistant polyester based powder coating. There is a 20 gpm (75.7 L) AXION shower head, an eyewash that features the medically acclaimed AXION® MSR eye/face wash head assembly. This single shower and/or eyewash or multiple shower/eyewash tempering unit provides an operating temperature range of 35° to 120° F (1.67° to 48.9° C), supplied with 480V single phase tie in, and is designed to operate with a number of tempering and electrical options. The tempered water blending system will include an integral hot water supply, and will incorporate fail-safe features like anti-scald protection and full flow cold water bypass. The electrical system can be easily adapted to voltages upon request. Combination shower and eyewash is certified by CSA to meet the ANSI Z358.1 Standard for emergency Eyewash and Shower Equipment. For the electrical certification, the system is certified by accredited Certification Body.

• Standardized platform provides shorter lead times and customizable configuration options
• Advanced Programmable Monitoring Control System with real-time digital display
• High visibility safety green for quick visual placement during an emergency
• AXION technology with inverted eye/face wash and hydrodynamic shower flows
• Ready-to-incorporate design variations including hot water supply, electrical type, temperature control, stainless steel piping, and more

Model 8770 ePOD™ is the lightweight solution for conditions where there is no potable water available, or water that is available doesn’t meet the requirements for ANSI compliant safety shower operation. The 8770 overhead tank shower (OTS) design stores all the water required for a fully compliant safety shower/eyewash response in a custom engineered tank and tower design. This configuration allows the overhead tank to gravity feed water to both the shower and eyewash. The 8770 is the perfect solution for remote locations without on-site water, locations where plumbing is difficult or economically not feasible, or anywhere a quick, easy to install safety shower solution is needed. This unit includes an aluminum structure with bright green side panels and 530 gallon (2006 L) overhead molded plastic tank. Supplied with a NEMA 4 electrical enclosure with 480V, three phase inlet. The emergency flushing is provided by a hydrodynamic showerhead as well as the medically acclaimed AXION® MSR eyewash. This system is designed to operate with several electrical options. Optional model 9084 cleansing stick can be used to provide continual protection against pathogenic bacteria in the water for up to 3 years. 1-1/2″ and cold stainless-steel pipe inlet.

• Standardized platform provides shorter lead times and customizable configuration options
• High visibility safety green for quick visual placement during an emergency
• AXION technology with inverted eye/face wash and hydrodynamic shower flows
• Ready-to-incorporate design variations including hot water heaters, electrical type, alarm packages, stainless steel piping, and more

Model 8780 skid-mounted tempering system is the heart of the Haws Integrated tempering solutions line, offering a wide range of options to apply the equipment to an extensive range of water tempering solutions. The 8780 tempering skid mixes it’s pre-heated water supply in its onboard storage tank with low temperature facility water through its Haws Tempered Water Blending System, to produce an ANSI compliant water supply for all safety equipment in the plumbed system. Included is an aluminum 5′ x 5′ (1.5 x 1.5 m) frame with a composite equipment platform, with HYTEX Black chemical and UV resistant polyester based powder coating. This multiple shower and eyewash feeder provides an operating temperature range of 32° to 104° F (0° to 40° C), and is designed to operate with a number of tempering and electrical options. The standard tempered water blending system includes a 318 gallon hot water tank with 480V 1ph, and will incorporate fail-safe features like anti-scald protection and full flow cold water bypass. The electrical system can be easily adapted to voltages upon request.

• CSA Certified to ASSE 1071 and QPS Electrically Certified for Ordinary Locations
• Standardized platform provides shorter lead times and customizable configuration options
• Ready-to-incorporate design variations including hot water supply, electrical type, blending capabilities, stainless steel piping, and more
• Optional VFD/Pump package for recirculation and/or pressure boosting applications

Trouble viewing this website?

Without an up-to-date browser, you may have trouble with some of our features.

Update Now

Edge

Firefox

Chrome