Hydration Archives

9070C – Filter Cartridge

Model 9070C is the replacement cartridge for Model 9070 Filter.

6717 – Mounting Plate

The Haws model 6717 in-wall mounting plate provides maximum support and facilitates the installation of the ‘Hi-Lo’, barrier-free model 1117L. Mounted prior to the finished wall, this mounting plate allows the ‘Hi-Lo’ fountain to be easily and quickly installed.

Steel construction provides a solid support system for this fountain
Measurements are 36″ W x 14 -¾” H x 3/16″ (91 x 37.5 x .47 cm)

6800 – In-Wall Carrier

Model 6800 In-wall floor mounted fixture carrier: Two 2½” x 1½” x 1/8” thick structural steel uprights having 6” x 3″ x 3/8” thick welded steel 4-bolt floor flanges, supplied with ‘U’ bolts and hardware. For use in conjunction with Haws in-wall mounting plates 6700, 6700.4, 6710, 6715, 6717, or 6776, for extra heavy duty fixture support. Fits inside standard 2” x 4” wall construction. Suitable for use with either 3/8″ or 1/2″ concrete anchors (by others). Includes mounting holes for plumbing stub out bracket and electrical boxes. Exceeds requirements when tested in accordance to ASME Standard A112.6.1M. Design was independently verified as suitable to meet HCAI and CBC anchor spacing requirements.

6518.2FR – Freeze-Resistant Bury Valve For Dual Fountain

The Haws 6518.2FR freeze-resistant valve system is a fully-engineered pneumatic operated valve for use on all Haws hi-lo two bubbler freeze-resistant pedestal fountains. The placement of the valve below the frost line allows the system to function when freezing conditions are present at surface level. Its fully accessible design allows for reliable service year round.

Installed below the frost line, the valve remains fully functional under the worst of weather conditions, with the fountain remaining functional as well
If a maintenance issue ever arises, rest assured that the valve assembly is easily removed and replaced without disrupting the remainder of the fountain
Flow is easily adjustable with supplied regulator valve
Unit is applicable for dual pedestal mounted fountain designs
Consult with the local authority having jurisdiction before installation in order to determine if any additional regulations or requirements may apply

Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and NSF/ANSI/CAN 61: Q ≤ 1.

6518FR – Freeze Resistant Bury Valve For Single Fountain

The Haws 6518FR freeze-resistant valve system is a fully engineered pneumatic operated valve for use on all Haws single bubbler freeze-resistant pedestal fountains. The placement of the valve below the frost line allows the system to function when freezing conditions are present at surface level. Its fully accessible design allows for reliable service year round.

Installed below the frost line, the valve remains fully functional under the worst of weather conditions, with the fountain remaining functional as well
If a maintenance issue ever arises, rest assured that the valve assembly is easily removed and replaced without disrupting the remainder of the fountain
Flow is easily adjustable with supplied regulator valve
Unit is applicable for single pedestal mounted fountain designs
Consult with the local authority having jurisdiction before installation in order to determine if any additional regulations or requirements may apply

6518FRDV – Drain Valve

Model 6518FRDV is a drain valve assembly for use on freeze-resistant fountain valves. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006).

6521FR – Freeze Resistant In-Wall Valve

The Haws 6521FR freeze-resistant valve system is a fully engineered pneumatic operated valve for use on all Haws single bubbler wall mounted freeze-resistant fountains. The placement of the valve on an interior wall where the ambient temperature minimum is 50° F (10° C) allows the system to function when freezing conditions are present at the fountain outside the wall. Its fully accessible design allows for reliable service year round.

Installed in an area where the temperature remains at a minimum of 50° F (10° C), this unit will assist the fountain in remaining fully functional in freezing conditions
If a maintenance issue ever arises, rest assured that the valve system is easily accessed, making troubleshooting simpler
Flow is easily adjustable with supplied regulator valve
Unit is applicable for single bubbler wall mounted freeze-resistant fountain designs

6603 – Access Panel

Model 6603 is a 9″ x 9″ (22.9 x 22.9 cm) access panel designed to facilitate maintenance by allowing easier access to plumbing behind the wall. It is made of stainless steel with a satin finish and includes frame and screws.

6603HPS – Access Panel

Model 6603HPS is a 9″ x 9″ (22.9 x 22.9 cm) access panel designed to facilitate maintenance by allowing easier access to plumbing behind the wall. It is made of high-polished stainless steel, and includes frame and screws.

6606 – Access Panel

Model 6606 is a 15″ x 9″ (38.1 x 22.9 cm) access panel designed to facilitate maintenance by allowing easier access to plumbing behind the wall. It is made of stainless steel with a satin finish, and is made to facilitate maintenance by allowing easier access to plumbing behind the wall.

6606HPS – Access Panel

Model 6606HPS is a 15″ x 9″ (38.1 x 22.9 cm) access panel designed to facilitate maintenance by allowing easier access to plumbing behind the wall. It is made of stainless steel with a high-polished finish. It is made to facilitate maintenance by allowing easier access to plumbing behind the wall.

6608 – Access Panel

Model 6608 is a 32″ x 9″ (81.2 x 22.9 cm) access panel designed to facilitate maintenance by allowing easier access to plumbing behind the wall. It is made of stainless steel with a satin finish for Model 1011MS.

Your Feedback Matters!