The Haws model HC117 is a fan motor for the 1200 series water coolers chiller compartment.

The Haws model HCR8 remote chiller provides 8 gallons (30.3 L) per hour of 50° F (10° C) +/- 5° cold water to a wide variety of fountains. This model is rated at 115V, 60Hz, single phase, 5 amp service. It is constructed of heavy-gauge galvanized steel and its compact style can be concealed under a counter, between or within walls (check local codes) or high on a wall or column. There are many other applications including pre-cooling of beverage dispensers, and machine coolant cooling.

• Cooling capacity of 8 gph (30.3 L) , 115V – 60Hz system with full load amps of 5, with a minimum 4″ (10.2 cm) clearance for sides and back of unit.
• Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and NSF/ANSI/CAN 61: Q ≤ 1.

Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.

Model BP15 is a versatile and decorative back panel for model 1920 that increases location visibility of the bottle filler, and also helps protect wall from inadvertent splash. This back panel is 15″ x 17″ (38 x 43 cm) stainless steel with a satin finish. BP15 and 1920 can be used with 1001, 1107 and 1109 series models.

Model BP15HPS is a versatile and decorative back panel for model 1920HPS that increases location visibility of the bottle filler, and also helps protect wall from inadvertent splash. This back panel is 15″ x 15″ (38 x 38 cm) stainless steel with a polished finish. BP15HPS and 1920HPS can be used with model 1001HPS and H1001.8HPS.

Model BP3 is a versatile and decorative back panel that increases location visibility of the fountain and also helps protect wall from inadvertent splash. Model BP3 is 15″ x 9″ (38 x 23 cm) stainless steel with a satin finish. Used on 1105 and 1109 series models.

Model BP32 is a versatile and decorative back panel for model 1920 bottle filler that increases location visibility, and also helps protect wall from inadvertent splash. This back panel is 32″ x 9.5″ (81 x 24 cm) stainless steel with a satin finish. BP32 can be used with model 1920 over 1011, 1117 and 1119 series dual fountains.

Model BP32HPS is a versatile and decorative back panel for model 1920HPS bottle filler that increases location visibility, and also helps protect wall from inadvertent splash. This back panel is 32″ x 9.5″ (81 x 24 cm) stainless steel with a polished finish. BP32HPS can be used with model 1920HPS over fountain models 1011HPS and H1011.8HPS.

Model BP32R is a versatile and decorative reversed mount back panel for model 1920 bottle filler that increases location visibility, and also helps protect wall from inadvertent splash. This back panel is 32″ x 9.5″ (81 x 24 cm) stainless steel with a satin finish, and allows the bottle filler to be mounted over the left side low portion of the fountain that has been reversed from right side low. BP32R can be used with model 1920 over 1011, 1117 and 1119 series dual fountains.

Model BP32RW is a versatile and decorative reversed mount back panel for model 1920W bottle filler that increases location visibility, and also helps protect wall from inadvertent splash. This back panel is 32″ x 9.5″ (81 x 24 cm) white painted stainless steel, and allows the bottle filler to be mounted over the left side low fountain portion of model 1501 which is reversed from the standard right side low.

Model BP32W is a versatile and decorative back panel for model 1920W bottle filler that increases location visibility, and also helps protect wall from inadvertent splash. This back panel is 32″ x 9.5″ (81 x 24 cm) white painted stainless steel, and is mounted over model 1501.

Model BP6 is a versatile and decorative back panel that increases location visibility of the fountain and also helps protect wall from inadvertent splash. Model BP6 is 15″ x 9″ (38 x 23 cm) stainless steel with a satin finish.

Model 9070 Eye Wash Filter is recommended for installation on all eyewash units for additional protection for eyes. Made of FDA approved polypropylene with disposable FDA approved viscose fiber filter media which removes particles down to 20 microns. Flow Capacity: 7 gpm (26.5 L) max (recommended). Maximum Working Pressure: 125 psi (8.62 bar) Size: 15″ (38.1 cm) overall by 5″ (12.7 cm) diameter Supply: 3/4″ NPT inlet and outlet.

Trouble viewing this website?

Without an up-to-date browser, you may have trouble with some of our features.

Update Now

Edge

Firefox

Chrome