Part 0005982897, 1-1/4″ NPT x 1-1/4″ O.D. satin chrome-plated brass trap.
0005514039.1 – Cold Stem AssemblyPart 0005514039.1 cold stem assembly for 5530LF.
0002049640 – Door KeyPart 0002049640 is a tee handle door key for large access panel on Model 3500 series pedestal drinking fountains. Accommodates 5/16″ square head.
0002981127 – Hex KeyPart 0002981127 is a 5/32″ hex wrench with hole to accommodate pin in socket screw.
0310000203 – Hex Key ToolModel 0310000203 hex key tool for bottle filler drain cover plate on model 3690.
0001235211 – BubblerPush button bubbler valve is designed with an adjustable stream regulation and a shielded bubbler to provide an anti-squirt drinking stream. Constructed from stainless steel with a polished finish, this bubbler valve is resistant to corrosive materials and is easily kept clean. Uses locking pins for securing to fountain basin. Dimensions: Bottom of base to top of bubbler is 3-3/8″ (8.6 cm), base diameter is 1-1/4″ (3.2 cm), and connection is a 3/8″ IPS inlet.
0001632151 – CartridgePart # 0001632151 high flow replacement cartridge used with the 5874HF valve.
0001928775 – Electrical CordPart 0001928775 electrical cord for the surface mount Haws 2000SMS.
0006983506 – Spanner Wrench for 5874Part 0006983506 spanner wrench is used to remove the PBA6 and PBA7 push button cover used with the 5874 valve. Also used to remove retaining ring for replacing the cartridge and screen (VRK5874 kit) in 5874 valve assembly.
1920WHO – Vandal-Resistant Motion-Activated White Bottle FillerModel 1920WHO vandal-resistant touchless stainless-steel bottle filler powder-coated white uses a sensor operated stainless steel solenoid valve controlled by a transformer for hands-free operation. A pressure regulator is used to adjust the flow according to incoming water pressures. It can be a stand-alone station, or mounted above the Haws 1311 or 1501 series drinking fountains.
- Optional 3000 gallon water filter available (model 6480)
- Touchless operation for safety and peace of mind
- Vandal resistant components include the sensor casing and bottom plate
- 100% lead-free waterways
- 30-second obstruction time-out to reduce tampering of sensor
- Gloss white powder-coated finish
- Available steel wall mounting plate recommended
- 1 gpm (3.78 L) Laminar flow
- This product requires a mounting plate; either the 6700 in-wall or the 6700R on-wall support plate. (See options below)
Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.
1011.8HO2 – Chilled Vandal-Resistant ADA Motion-Activated Dual FountainModel 1011.8HO2 ADA vandal-resistant touchless electric drinking fountain provides 8 gph (30.3 L) chilled water performance in an engineered stainless-steel skin. This wall mounted swirl bowl designed fountain incorporates sensor operated stainless steel solenoid valves controlled by a transformer for hands-free operation. A pressure regulator is used to adjust the bubbler flow according to incoming water pressures.
- Optional 3000 gallon water filter available (model 6480)
- Touchless operation for safety and peace of mind
- Vandal resistant components include the bubblers, bowls, drains and bottom plates
- 30-second obstruction time-out to reduce tampering of sensor
- 18 gauge Type 304 Stainless Steel bowl assemblies mounted on 14 gauge Type 304 Stainless Steel wall brackets
- 100% lead-free waterways
- Grille slots are designed to eliminate sharp edges and are backed with a foam filter to protect the fan motor and high displacement compressor from debris
- Polished chrome-plated brass vandal-resistant bubbler heads with integral laminar anti-squirt flow eliminate water splash
- Beautiful satin finish resists stains and corrosion
Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.
Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.
1920HPSHO – Vandal-Resistant Motion-Activated Polished Bottle FillerModel 1920HPSHO vandal-resistant touchless polished stainless-steel bottle filler uses a sensor operated stainless steel solenoid valve controlled by a transformer for hands-free operation. A pressure regulator is used to adjust the flow according to incoming water pressures. It can be a stand-alone station, or mounted above the Haws 1001HPS and 1011HPS series drinking fountains.
- Optional 3000 gallon water filter available (model 6480)
- Touchless operation for safety and peace of mind
- Vandal resistant components include the sensor casing and bottom plate
- 100% lead-free waterways
- 30-second obstruction time-out to reduce tampering of sensor
- High polished stainless steel finish
- Available steel wall mounting plate recommended
- 1 gpm (3.78 L) Laminar flow
- This product requires a mounting plate; either the 6700 in-wall or the 6700R on-wall support plate. (See options below)
Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”
