The Haws freeze protected 8300FP combines the use of an ABS showerhead and anti-surge Soft-Flo eyewash heads for the irrigation process. Emergency combination unit is equipped with pop-off dust covers, so when debris is present, the irrigation process stays protected. Virtually eliminating mishaps, the unit’s safety features include: universal emergency sign, high visibility stripe, and two labeled push plates.
- A great addition to unsafe environments where the eyes and body may be exposed to corrosive materials
- All unused water drains out of the unit through drain valves in the ground below the frost line
- Requires minimal maintenance and is equipped with test card to record weekly testing
- Reducing installation time, eyewash is pre-built and fully water/pressure tested
- Solid galvanized steel construction make for one sturdy piece of emergency equipment
Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment.
7601.37 – Portable Emergency Air-Pressurized EyewashHazardous chemical spills occur in isolated areas all over the world everyday and, Haws is working to position models like this pressurized 37 gallon (140 L) portable eyewash and body spray in such areas, providing a reliable source of safety for the irrigation process. More specifically, Model 7601.37 is able to do so by combining the use of twin soft-flo eyewash heads with a face and body-spray head.
- Features a 37 gallon (140 L) ASME rated stainless steel tank
- Protective measures include: air pressure gauge, pressure relief valve, and tire-type air fill valve
- Includes a 6 foot (182.9 cm) hose that extends the body-spray reach expanding the unit’s protective capabilities
- Measurements: 60″ (152.4 cm) high, 27″ (68.6 cm) deep
Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment.
7603 – Portable Air-Pressurized Emergency EyewashThe Haws 7603 is an ideal, cost-efficient solution for a facility’s ANSI eyewash requirements in locations without access to a continuous potable water source. The pressurized 15 gallon (56.8 L) personal portable eyewash provides a reliable source of safety for the irrigation process.
- Features a 15 gallon (56.8 L) stainless steel tank
- Upgraded ball valves with stainless steel ball and stem
- Protective measures include: air pressure gauge, pressure relief valve, and tire-type air fill valve
- Measurements: 39-1/2″ (100.3 cm) high, 16″ (40.6 cm) diameter
Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment.
7603T – 120V Portable Air-Pressurized Tempered Emergency EyewashThe Haws 7603T is an ideal, cost-efficient solution for a facility’s ANSI eyewash requirements in locations without access to a continuous potable water source. The pressurized 15 gallon (56.8 L) portable eyewash uses a NEMA 3R heated, insulated blanket to provide ANSI compliant tempered water in operating temperatures between -20° F (-30° C) and 100° F (38° C) for locations without access to a continuous potable water source.
- Features a 15 gallon (56.8 L) stainless steel tank
- Upgraded ball valves with stainless steel ball and stem
- Protective measures include: air pressure gauge, pressure relief valve, and tire-type air fill valve
- Power cord included
- Measurements: 39-1/2″ (100.3 cm) high, 16″ (40.6 cm) diameter
- QPS-C-US-Certified-Electrical-Safety for NEMA/Type 3R in ordinary locations, and to ANSI/ISEA Z358.1
The Haws 7611 swing-away eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain.
- Dust cover allows for the 7611 to stay protected from debris when not in use
- Eyewash streams provide Zero Vertical Velocityâ„¢ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
- Requires minimal maintenance and is equipped with test card to record weekly testing
- Can be re-configured on-site to be left-hand operation
- ANSI/ISEA Z358.1 tempering compliance options
Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment
7612 – AXION® MSR Sink Mount Eye/Face WashModel 7612 sink or deck mounted eye/face wash features the medically acclaimed AXION MSR stainless steel eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain. When not in use, this unit utilizes a swing-away feature so the area stays clear for everyday use.
- A Dust cover allows the 7612 to stay protected from debris when not in use
- Eyewash streams provide Zero Vertical Velocityâ„¢ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
- Requires minimal maintenance and is equipped with test card to record weekly testing
- Side mount design allows the unit to be mounted from the right side of the sink
- ANSI/ISEA Z358.1 tempering compliance options
Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment
7612LH – AXION® MSR Sink Mount Eye/Face WashModel 7612LH sink or deck mounted eye/face wash features the medically acclaimed AXION MSR stainless steel eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain. When not in use, this unit utilizes a swing-away feature so the area stays clear for everyday use.
- A dust cover allows the 7612LH to stay protected from debris when not in use
- Eyewash streams provide Zero Vertical Velocityâ„¢ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
- Requires minimal maintenance and is equipped with test card to record weekly testing
- Counter top mounted on the left side of a sink
- ANSI/ISEA Z358.1 tempering compliance options
Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment
7260B-7270B – AXION® MSR Wall Mount Eye/Face WashModel 7260B-7270B wall mounted eye and face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain.
- Eyewash streams provide Zero Vertical VelocityÂâ„¢ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
- Unit features a round 11″ (27.9 cm) green ABS plastic receptor and aluminum wall bracket for long life
- Includes a mesh in-line strainer to collect line debris, and ball valve with stainless steel ball and stem for durability
- Supply: 1/2″ NPT. Waste: 1- 1/4″ NPT
- ANSI/ISEA Z358.1 tempering compliance options
Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment.
Due to technology advancements these two models are now the same.
7260BT-7270BT – AXION® MSR Wall Mount Eye/Face WashModel 7260BT-7270BT wall mounted eye and face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain.
- Eyewash streams provide Zero Vertical Velocityâ„¢ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
- Features a round 11″ (27.9 cm) green ABS plastic receptor, aluminum wall bracket, and tailpiece and trap
- Includes a mesh in-line strainer to collect line debris, and ball valve with stainless steel ball and stem for durability
- Supply: 1/2″ NPT. Waste: 1- 1/2″ NPT
- ANSI/ISEA Z358.1 tempering compliance options
Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment.
Due to technology advancements these (two models) are now the same.
7261-7271 – AXION® MSR Pedestal Mount Eye/Face WashModel 7261-7271 pedestal mounted eye and face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain.
- Eyewash streams provide Zero Vertical Velocityâ„¢ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
- Features a round 11″ (27.9 cm) green ABS plastic receptor and 1-1/4″ NPT galvanized stanchion
- Includes a mesh in-line strainer to collect line debris, and ball valve with stainless steel ball and stem for durability
- Supply: 1/2″ NPT. Waste: 1- 1/4″ NPT
- ANSI/ISEA Z358.1 tempering compliance options
Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment.
Due to technology advancements these (two models) are now the same.
7324 – AXION® MSR Wall Mount Eye/Face WashHaws 7324 features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain.
- Unit is equipped with a pop-off dust cover, so when debris is present, the irrigation process stays protected
- Easily detected and maintained, emergency equipment is equipped with safety sign and test card to record weekly testing
- Reducing installation time, eye/face wash and valve assembly is pre-built and fully water/pressure tested
- Floor drain is recommended for this unit
- ANSI/ISEA Z358.1 tempering compliance options
Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment.
7360B-7460B – AXION® MSR Wall Mount Eye/Face WashModel 7360B-7460B wall mounted, eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain.
- Eyewash streams provide Zero Vertical Velocityâ„¢ engineering with even laminar flow for enhanced comfort, stability and effectiveness
- Features a round 11″ (27.9 cm) stainless steel receptor and aluminum wall bracket for long life
- Includes a mesh in-line strainer to collect line debris, and ball valve with stainless steel ball and stem for durability
- Supply: 1/2″ NPT. Waste: 1- 1/4″ NPT
- ANSI/ISEA Z358.1 tempering compliance options
Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment.
Due to technology advancements these (two models) are now the same.