Model SP153DPDT is a flow switch for use with the 9001.5 series alarms. Switch will activate at 2 gallons (7.6 L) per minute of flow. 4A rating at 24 VDC & 120VAC; 3A rating at 240VAC.  Double pole, double throw.  Class 1, Division 1 and Class 1, Division 2 (Groups A, B, C, & D, T4A).  1/2” NPT inlet and outlet. (For horizontal use only)

The Haws 8605SS Config STD-UD, an enclosed emergency shower and eye wash with a universal drain, features the medically acclaimed AXION MSR stainless steel eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eye washes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain. AXION MSR also offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim of normal showerheads, making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets.

• Type 304 Stainless Steel booth and piping construction with a satin finish
• Integral center location drain strainer with 3 integral side flush drains
• Install flexibility with top or bottom inlet supply
• Large universal labeling and signage for easy locating
• Eyewash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
• A great addition to unsafe environments where the eyes, face, and body may be exposed to corrosive materials
• Requires minimal maintenance and is equipped with test card to record weekly testing
• Reducing installation time, the enclosed emergency shower and eye wash is pre-built and fully pressure tested

Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment.

The Haws® Model 9007 is a versatile, portable eyewash cart engineered for safety, durability, and convenience. Built with a strong 1-1/4″ diameter carbon steel frame and finished with a black powder coating, this stand securely supports the Haws 7500 and 7501 gravity-fed eyewash units—as well as most comparable competitor models. Ideal for use in locations without plumbed water, the Model 9007 helps facilities meet ANSI and OSHA emergency eyewash requirements. An integrated catch tank collects water during activation or routine testing, simplifying cleanup and reducing slip hazards. Four smooth-rolling casters—two of which lock—allow for easy relocation on flat surfaces while ensuring stability during use. The portable eyewash cart assembles quickly, making it a practical solution for warehouses, construction sites, and other temporary or remote work environments.  Eyewash and J-Bracket not included.

The Haws® Model 9006 is a durable, portable eyewash stand designed to support the Haws 7500 and 7501 gravity-fed units—as well as most comparable competitor models. Built from rugged 1-1/4″ diameter carbon steel tubing and finished with a black powder-coated surface, this stand delivers a stable, corrosion-resistant solution for environments without plumbed water access. Perfect for remote or temporary workspaces, the Model 9006 helps ensure ANSI-compliant emergency eyewash availability in accordance with OSHA standards. Protective plastic feet included for added stability and support. Eyewash and J-Bracket not included.

The Haws 9128 Dust Cover is designed to safeguard the Haws 7501 Portable Eyewash (Not Included) from dust and airborne particulates, ensuring continued reliability in critical environments. Constructed from clear, durable vinyl, this cover allows for easy visual inspection while providing a secure protective barrier. Engineered for seamless installation and dependable performance, it helps maintain the integrity of your emergency eyewash station, ensuring it is always ready for use.

The Haws 9126 Portable Eyewash Heat Shield is designed to keep water at safe temperatures in warm environments, helping to prevent overheating and ensure reliable emergency eye protection. Compatible with the Haws 7501 Portable Eyewash. Provides the flushing fluid with four additional layers of heat protection, including water-resistant and UV-resistant vinyl fabric, foam insulation, thermal bubble layers, and an air gap, it delivers superior durability and performance for workplace safety.

• Reduces conductive heat transfer by up to 98%
• Reflects up to 60% of solar radiation
• Four total layers of heat protection providing an R Value of 3.45
• Water-Resistant
• UV-resistant outer shell
• Easily fitted, no tools required

Efficiency subject to various ambient conditions and Eye Wash location

Haws Model 8317CTFP Config STD-SV heat traced combination shower and eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain. AXION MSR also offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets. Virtually eliminating mishaps, the unit’s safety features include: thermal actuator bleed valves for scalding and freezing situations, 120V thermostat cable double wrapped piping, 3/4″ (1.9 cm) insulation surrounding piping and UV protected outside jacket to prevent freezing, as well as a universal emergency sign.

• Perfect for extreme weather conditions dropping down to -30° F (-34.4° C)
• Eyewash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
• Universal design allows for top or bottom water supply
• Scald and freeze protect bleed valves help this unit remain viable in all weather situations
• Requires minimal maintenance and is equipped with test card to record weekly testing
• Reducing installation time, entire unit is pre-built and fully pressure tested
• Solid stainless steel pipe stanchion and galvanized fittings make for a sturdy piece of corrosive resistant equipment
• Rated Class 1, Div 2, Group B, C & D. Temperature code T6

Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment. Model is QPS-C-US Certified, TYPE 4. (Nema 4 equivalent)

The Haws 7501 Config STD-9083 compact portable eyewash is a 9-gallon (34.1 L) capacity gravity operated portable eyewash that supplies a continuous flow of water for a full 15 minutes at .4 gpm. This unit is a cost-effective solution ideal for locations without access to potable water, including temporary decontamination sites, temporary treatment facilities, and short-term job sites. The 9083 cleansing stick provides clean water and ANSI compliance in equipment up to 15 gallons (60 L) for up to three years when serviced just once annually.

• Featuring a FDA approved high-density green polyethylene tank that is easily activated by pulling the yellow activation arm down to the open position
• A wide-fill opening with a securely threaded cap, and a pronounced ‘Max Fill’ line permits easy inspection, cleaning and filling
• Relocation is simple due to ‘Lift Here’ graphics, easily mounted bracket (included) and light design of this 9-gallon (34.1 L) portable
• Measurements: 14-1/2″ high, 22″ wide, 10-1/8″ (36.8 x 55.9 x 25.7 cm) deep. *Note: Unit must be wall hung

Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment.

The Haws 8606SS walk-through booth enclosed combination shower and eye/face wash features the medically acclaimed AXION MSR stainless steel  eye/face wash head assembly. This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eye washes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain. AXION MSR also offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim of normal showerheads, making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets.

• Type 304 Stainless Steel dual-entry walk-through booth and piping construction with a satin finish
• Integral center location drain strainer
• Install flexibility with top or bottom inlet supply
• Large universal labeling and signage for easy locating
• Eyewash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
• A great addition to unsafe environments where the eyes, face, and body may be exposed to corrosive materials
• Requires minimal maintenance and is equipped with test card to record weekly testing
• Reducing installation time, the entire unit is pre-built and fully pressure tested

Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment.

The Haws 8605SS, an enclosed emergency shower and eye wash featuring the medically acclaimed AXION MSR stainless steel eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eye washes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain. AXION MSR also offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim of normal showerheads, making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets.

• Type 304 Stainless Steel booth and piping construction with a satin finish
• Integral center location drain strainer
• Install flexibility with top or bottom inlet supply
• Large universal labeling and signage for easy locating
• Eyewash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
• A great addition to unsafe environments where the eyes, face, and body may be exposed to corrosive materials
• Requires minimal maintenance and is equipped with test card to record weekly testing
• Reducing installation time, the enclosed emergency shower and eye wash is pre-built and fully pressure tested

Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment.

Learn More

Model 6810 In-wall floor mounted fixture carrier: Two 2½” x 1½” x 1/8” thick structural steel uprights having 6” x 3″ x 3/8” thick welded steel 4-bolt floor flanges, supplied with ‘U’ bolts and hardware. For use in conjunction with Haws in-wall mounting plates 6700, 6700.4, 6710, 6715, 6717, or 6776, for extra heavy duty fixture support. Fits inside standard 2” x 4” wall construction. Suitable for use with either 3/8″ or 1/2″ concrete anchors (by others). Includes mounting holes for plumbing stub out bracket and electrical boxes, and a on-site custom-fit side drain port. This port can be placed at any height. Exceeds requirements when tested in accordance to ASME Standard A112.6.1M. Design was independently verified as suitable to meet HCAI and CBC anchor spacing requirements.

Haws part number 0110000459 is a nickel-plated brass pressure relief valve for the Haws 7603 model series.

Trouble viewing this website?

Without an up-to-date browser, you may have trouble with some of our features.

Update Now

Edge

Firefox

Chrome