9400 – AXION® Steam Water Heater

The Haws 9400 AXION® Steam Water Heater replaces hot water tanks when pressurized steam is available. When an emergency shower or eyewash is activated, the flow of water opens a steam control valve. The steam enters a brazed plate heat exchanger, instantly heating the water. This mixing valve blends hot and cold water to produce an output of 80° F (27° C ) tepid water. Additional valves keep the system preheated, freeze protected and scald protected. The steam valve will remain closed should there be a loss of water pressure. This station complies with the ANSI Z358.1 standard and mixing valve is designed to meet ASSE 1071

9400LPS – AXION® Low Pressure Steam Water Heater

The Haws 9400LPS AXION® Low Pressure Steam Water Heater replaces hot water tanks when pressurized steam is available. When an emergency shower or eyewash is activated, the flow of water opens a steam control valve. The steam enters a brazed plate heat exchanger, instantly heating the water. This mixing valve blends hot and cold water to produce an output of 80° F (27° C) tepid water. Additional valves keep the system preheated, freeze protected and scald protected. The steam valve will remain closed should there be a loss of water pressure. This station complies with the ANSI Z358.1 standard and mixing valve is designed to meet ASSE 1071

8905 – AXION® MSR Wall Mount Eye/Face Wash

Haws 8905 features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eye washes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain. Unit is activated with simple squeeze lever operation.

Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment.

9009 – Waste Container

Model 9009 waste water container adapts to model 9008 to be used with models 7500 or 9010. Twenty gallon (75.7 L) yellow container constructed of tough polymer resin.

8720 – ePOD­™ Indoor/Outdoor Overhead Tank Combination Shower and Eye/Face Wash

Model 8720 ePOD™ indoor/outdoor insulated overhead tank heated enclosed shower and eye/face wash expands upon the unique Overhead Tank Shower design of the 8770 by adding and enclosed booth for victim protection and comfort. This enclosure allows the 8720 to be placed both indoors and outdoors in locations with extreme weather and exposure in order to maintain victim comfort and to protect both the equipment and users from exposure to dirty and harsh conditions. It shall include a 5’ x 5’ (1.52 x 1.52 m) bright green, chemically resistant, water-proof coated booth made with an aluminum base, frame, and enclosure. This superior design provides optional operating temperature ranges of -50° to 120° F (-40° to 49° C), and shall include spring-loaded, self-closing shower doors. The booth is with large directional arrows, large and small universal shower/eyewash signs, fiberglass floor grate, and 3” IPS floor drain. The use of an Advanced Programmable Monitoring Control System allows for real-time control of the operating system. The internal booth temperature is maintained by a space heater. The overhead 530-gallon (2006 L) tanks is constructed of insulated HDPE with water temperature controlled by immersion heating. Optional model 9084 cleansing stick can be used to provide continual protection against pathogenic bacteria in the water for up to 3 years. The standard electrical system comes with 480V 3ph standard (other voltages available). Emergency flushing is provided by an AXION® MSR eye/face wash head with greater than 3 gpm flow. The entire system meets the ANSI Z358.1 standard for emergency eyewash and shower equipment.

8730 – ePOD™ Indoor/Outdoor Heated Shower and Eye/Face Wash Booth

Model 8730 ePOD™ enclosed shower and eye/face wash unit provides a sheltered, safe environment for the use of the safety shower and/or eyewash station. While it does not provide its own tempering system, the 8730 can be coupled with a separate tempering unit or an ANSI compliant water source to provide a refuge from the elements to maintain a comfortable space for victim response. It shall include a completely enclosed 5’ x 5’ (1.52 x 1.52m) all-weather, aluminum structure covered with safety green chemical and UV resistant polyester based powder coating which provides an optional operating temperature range of -50° to 120° (-45° to 48.9° C). It shall include spring-loaded, self-closing shower doors, is trimmed with large directional arrows, universal shower/eyewash sign, fiberglass floor grate, and 3″ IPS inside caulk drain. There is a 20 gpm (75.7 L) AXION® hydrodynamic showerhead, an eye/face wash that features the medically acclaimed AXION® MSR eye/face wash head assembly. Chrome-plated brass stay-open shower and eye/face ball valves equipped with stainless steel ball and stem, and can be protected by scald and freeze bleed valves. The internal booth temperature can be maintained by an optional space heater. The available alarm system is proximity switch activated, and provides local audible and visible alarms. Combination shower and eyewash is certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment. For the electrical certification, the system is certified by accredited Certification Body.

8780 – Indoor Emergency Water Tempering Skid

Model 8780 skid-mounted tempering system is the heart of the Haws Integrated tempering solutions line, offering a wide range of options to apply the equipment to an extensive range of water tempering solutions. The 8780 tempering skid mixes it’s pre-heated water supply in its onboard storage tank with low temperature facility water through its Haws Tempered Water Blending System, to produce an ANSI compliant water supply for all safety equipment in the plumbed system. Included is an aluminum 5′ x 5′ (1.5 x 1.5 m) frame with a composite equipment platform, with HYTEX Black chemical and UV resistant polyester based powder coating. This multiple shower and eyewash feeder provides an operating temperature range of 35° to 120° F (45.5° to 48.9° C), and is designed to operate with a number of tempering and electrical options. The standard tempered water blending system includes a 318 gallon hot water tank with 480V 1ph, and will incorporate fail-safe features like anti-scald protection and full flow cold water bypass. The electrical system can be easily adapted to voltages upon request.

8785 – All-Weather Emergency Water Tempering Booth

Model 8785 enclosed tempering system can be placed into any environment. Whether the intent is the protect the equipment from dirty or contaminated environments, shield from unpredictable outdoor weather, or provide a heated/cooled enclosure in extreme temperature installations the 8785 is your go-to choice for a rugged yet flexible water tempering skid solution. It shall include an all-weather 5′ x 5′ (1.52 x 1.52m) booth which provides optional operating temperature ranges of -50° to 120° F (-45.5° to 49.8° C), and is constructed of corrosion resistant aluminum paneling with polyester based powder coating. This single or multiple showers and/or eyewash tempering water unit with galvanized piping is designed to operate with several tempering and electrical options. Standard hook-up is a 480V, three phase inlet inside a NEMA 4 enclosure. The internal booth temperature can be maintained by an optional space heater. The tank water temperature is maintained by an immersion heater. The electrical system can be easily adapted to voltages upon request. The 8785 tempering booth utilizes the Haws Tempered Water Blending System to provide tempered water under dire situations, and incorporates fail-safe features like anti-scald protection and full flow cold water bypass in the event of hot water failure. 1-1/2″ tepid and cold water inlets.

8710 – ePOD­™ Indoor/Outdoor Tempered Shower and Eye/Face Wash System

Model 8710 ePOD™ Indoor/Outdoor heated enclosed shower and eye/face wash combines all the features of the 8780, 8785, and 8760 into one streamlined package that can provide protection for both the tempering equipment as well as the victim using the included safety shower eyewash combo unit. It shall include a 5’ x 10’ (1.52 x 3.04 m) bright green, chemically resistant, water-proof coated booth made with an aluminum base, frame, and enclosure. This superior design provides optional operating temperature ranges of -50° to 120° F (-40° to 49° C), and shall include spring-loaded, self-closing shower doors, equipment room door, and removable service panel. The use of an Advanced Programmable Monitoring Control System allows for real-time control of the operating system. The booth is trimmed with large directional arrows, large and small universal shower/eyewash signs, fiberglass floor grate, and 3” IPS inside caulk drain. Temperature extremes are protected by scald and freeze bleed valves. The internal booth temperature is maintained by a space heater. The standard alarm system is flow switch activated and provides local audible and visible alarms. The tempered blending system will include an integral hot water supply and will incorporate fail-safe features like anti-scald protection and full flow cold water bypass. There is the medically acclaimed AXION® 20 gpm (75.7 L) showerhead and AXION® MSR 3.7 gpm (14 L) eye/face wash head assembly, along with a 3 gpm (11.4 L) side hanging drench hose.

Win a $250 Gift Card

Complete our customer experience survey to be entered to WIN a $250 Amazon gift card. Drawings held quarterly.

Enter to Win!