Theย Haws 1311-1920W ADA vandal-resistant drinking fountain and bottle filler uses patented stainless steel, push-button activated, valve assemblies allowing for front access stream adjustment as well as cartridge and strainer access. This wall mounted fountain offers the ‘only’ all stainless-steel valve body that is machined out of solid bar stock, is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer, and has front access to the water stream height adjustment for easy maintenance without having to remove the valve.
- Optional 3000 gallon water filter available (model 6480)
- Only stainless steel valve body that is machined out of solid bar stock
- 100% lead-free waterways
- Vandal resistant components include the bubbler, buttons, drain and bottom plates
- White enameled-iron fountain design provides toughness for the worst of environments
- 1 gpm (3.78 L) bottle filler laminar flow
- Easy maintenance with front access to valve adjustment and cartridge replacement
- Beautiful white enamel fountain and powder-coated bottle filler combination brings pleasing aesthetics to any environment
- Soft rounded corners prevent from mishaps and other accidents that may occur once the fountain is installed
- The bottle filler requires a mounting plate; either the 6700 in-wall or the 6700R on-wall support plate. (See options below)
Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q โค 1”.
1920WHO – Vandal-Resistant Motion-Activated White Bottle FillerModel 1920WHO vandal-resistant touchless stainless-steel bottle filler powder-coated white uses a sensor operated stainless steel solenoid valve controlled by a transformer for hands-free operation. A pressure regulator is used to adjust the flow according to incoming water pressures. It can be a stand-alone station, or mounted above the Haws 1311 or 1501 series drinking fountains.
- Optional 3000 gallon water filter available (model 6480)
- Touchless operation for safety and peace of mind
- Vandal resistant components include the sensor casing and bottom plate
- 100% lead-free waterways
- 30-second obstruction time-out to reduce tampering of sensor
- Gloss white powder-coated finish
- Available steel wall mounting plate recommended
- 1 gpm (3.78 L) Laminar flow
- This product requires a mounting plate; either the 6700 in-wall or the 6700R on-wall support plate. (See options below)
Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q โค 1”.
BP32RW – Back PanelModel BP32RW is a versatile and decorative reversed mount back panel for model 1920W bottle filler that increases location visibility, and also helps protect wall from inadvertent splash. This back panel is 32″ x 9.5″ (81 x 24 cm) white painted stainless steel, and allows the bottle filler to be mounted over the left side low fountain portion of model 1501 which is reversed from the standard right side low.
BP32W – Back PanelModel BP32W is a versatile and decorative back panel for model 1920W bottle filler that increases location visibility, and also helps protect wall from inadvertent splash. This back panel is 32″ x 9.5″ (81 x 24 cm) white painted stainless steel, and is mounted over model 1501.
1920W – Vandal-Resistant White Powder-Coated Bottle fillerModel 1920W vandal-resistant painted white stainless steel bottle filler uses a patented stainless steel push-button valve assembly allowing for front access stream adjustment as well as cartridge and strainer access. This wall mounted bottle filler offers the ‘only’ all stainless-steel valve body that is machined out of solid bar stock, is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer, and has front access to the water stream height adjustment for easy maintenance without having to remove the valve. It can be a stand-alone station, or mounted above the Haws 1311 or 1501 drinking fountains.
- Optional 3000 gallon water filter available (model 6480)
- Only stainless steel valve body that is machined out of solid bar stock
- 100% lead-free waterways
- Vandal resistant components include the button and bottom plate
- Painted white finish
- Available steel wall mounting plate recommended
- 1 gpm (3.78 L) Laminar flow
- Maintenance is made easy with front access to valve adjustment and cartridge replacement
- This product requires a mounting plate; either the 6700 in-wall or the 6700R on-wall support plate. (See options below)
Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q โค 1”.