Complete our customer experience survey to be entered to with a $250 Amazon gift card. Drawings held quarterly.
The Haws 1210SF wall-mount filtered ADA bottle filling station is the newest addition to the most comprehensive hydration offering in the industry. The modern, innovative design is tailored to meld with office spaces, universities and airports, or serve the functional needs of spaces like a school gymnasium. Sensor activated bottle filler allows for hands free operation, and intuitive LED electronic display keeps the user informed with how many plastic bottles have been saved. Fresh, always filtered water with the Electronic Lifecycle Control feature shuts water flow off when filter reaches its gallons capacity. Flow will begin again when filter is replaced.
- Instantaneous tankless water cooler for consistent cool water during use of unit
- Hands-free sensor operated bottle filling station
- Auto-purge feature automatically cycles once every 24 hours to assure a fresh water supply as well as trap integrity
- LED illuminated bottle fill area
- Quick 1.1 GPM fill rate (depending on incoming pressure) for bottle filler
- Smart energy savings feature powers down refrigeration system after 2 hours of non-use, and will automatically start again when used
- Programmable to be shut-down during planned facility closures, weekends, etc.
- High traffic area ready with a 3000-gallon (11,356 L) capacity filter
- Raised platform for easy bottle resting and filling
- Durable, easy to clean 304 stainless-steel skin
- Retrofit installation compatibility over many existing water coolers
- 100% lead free waterways
- Galvanized steel frame
- Rated for indoor use
- Designed and assembled in the USA
CSA certified to comply with NSF/ANSI 42, NSF/ANSI 53, NSF/ANSI/CAN 61: Q ≤ 1, NSF/ANSI/CAN 372, ASME A112.18.1/CSA B125.1, ASME112.19.3/CSA B45.4, UL 399 and CSA C22.2 No. 120. ADA compliant to ICC A117.1, CSA B651, DOJ’s 2010 ADA Standards for Accessible Design when properly installed. ASHRAE 18 compliant chilling capacity. FCC ID: 2AUAN-1200SM and IC: 25359-1200SM
Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine), and failure to heed these conditions may void warranty.
1210S – Wall Mount ADA Bottle FillerThe Haws 1210S indoor wall-mount ADA bottle filler is the newest addition to the most comprehensive hydration offering in the industry. The modern, innovative design is tailored to meld with office spaces, universities and airports, or serve the functional needs of spaces like a school gymnasium. Sensor-activated bottle filler allows for hands-free operation, and intuitive LED electronic display keeps the user informed with how many plastic bottles have been saved.
- Instantaneous tankless water cooler for consistent cool water during use of unit
- Hygienic hands-free sensor operated bottle filler
- Auto purge feature automatically cycles once every 24 hours to assure a fresh water supply as well as trap integrity
- LED illuminated bottle fill area
- Quick 1.1 GPM fill rate (depending on incoming pressure) for bottle filler
- Smart energy savings feature powers down refrigeration system after two hours of non-use, and will automatically start again when used
- Programmable to be shut-down during planned facility closures, weekends, etc.
- Raised platform for easy bottle resting and filling
- Durable, easy-to-clean 304 stainless-steel skin
- Retrofit installation compatibility over many existing competitor water coolers
- 100% lead free waterways
- Galvanized steel frame
- Rated for indoor use
- Designed and assembled in the USA
CSA certified to comply with NSF/ANSI/CAN 61: Q ≤ 1, NSF/ANSI/CAN 372, ASME A112.18.1/CSA B125.1, ASME 112.19.3/CSA B45.4, UL 399 and CSA C22.2 No. 120. ADA compliant to ICC A117.1, CSA B651, DOJ’s 2010 ADA Standards for Accessible Design when properly installed. ASHRAE 18 compliant chilling capacity. FCC and CAN ICES – 3(A)/NMB-3(A).
Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine), and failure to heed these conditions may void warranty.
1011MSHO – ADA Vandal-Resistant Motion-Activated/Push Button Fountain w/Mounting SystemThe Haws 1011MSHO ADA Hi-Lo vandal-resistant stainless-steel drinking fountain with mounting system incorporates a sensor operated stainless steel solenoid valve controlled by a transformer for hands-free operation on one side, and offers the ‘only’ all stainless-steel valve body that is machined out of solid bar stock on the other. It is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer, and has front access to the water stream height adjustment for easy maintenance without having to remove the valve.
- Touchless operation on one side for safety and peace of mind
- Vandal resistant components include the bubblers, bowls, button, drains and bottom plates
- 30-second obstruction time-out to reduce tampering of sensor
- 18 gauge Type 304 Stainless Steel bowl assemblies mounted on 14 gauge Type 304 Stainless Steel wall brackets
- Front access plate allows for front access of P-trap and stop
- 100% lead-free waterways
- Polished chrome-plated brass bubbler heads with integral laminar anti-squirt flow eliminate water splash
- Easy maintenance with front access to push button valve adjustment and cartridge replacement
- Beautiful satin finish resists stains and corrosion
- “Hi-Lo” design allows for twice the users as regular fountains and suits the needs for various user heights
Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and NSF/ANSI/CAN 61: Q ≤ 1.
SP829SS – AXION® MSR ShowerheadModel SP829SS AXION® MSR 10-5/8″ (27 cm) stainless steel drench showerhead delivers dispersed flow for uniform drenching. This new hydrodynamic design minimizes the strong physical pressure that drives the water to the outer rim making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets. Inlet 1″ NPT.
SP90 – Eyewash BowlModel SP90 11″ (27.9 cm) round stainless steel with No. 2L bright finish on exterior. Includes the rubber seat washer.
SP829HPS – AXION® MSR ShowerheadModel SP829HPS AXION® MSR 10-5/8″ (27 cm) polished stainless steel drench showerhead delivers dispersed flow for uniform drenching. This new hydrodynamic design minimizes the strong physical pressure that drives the water to the outer rim making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets. Inlet 1″ NPT.
SP232 – Ball Valve With FlagModel SP232 is a Type 316 stainless steel stay-open ball valve, equipped with a stainless steel ball and stem. Full flow occurs with push on stainless steel flag. 1/2″ IPS inlet and outlet.
SP265 – Shower Ball ValveModel SP265 is a stay-open stainless steel ball shower valve with stainless steel stem for horizontal or vertical installation. Model includes handle. 1″ NPT.
SP509SS – In-Line StrainerModel SP509SS is a Type 304 stainless steel in-line 50 x 50 mesh water strainer that prevents debris from reaching the eye/face wash. Easily serviceable.
SP65SS – AXION® MSR Eye/face Wash HeadModel SP65SS AXION MSR Type 304 Stainless Steel eye/face wash head is the only product on the market to use an inverted flow design which provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drains. Eyewash streams provide Zero Vertical Velocityâ„¢ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness. (Not for use with freeze protected models)
SP8 – Eyewash BendModel SP8 electropolished Type 304 stainless steel eye/face wash bend. Used on eye and face wash head assemblies. 1/4″ NPT.
SP200 – Pull Rod 28″Model SP200 is a 28″ (71.1 cm) long stainless steel pull rod with triangular handle.