Model H1011.8HPSHO2-1920HPSHO vandal-resistant ADA electric drinking fountain and bottle filler provides 8 gph (30.3 L) chilled water performance in an engineered polished stainless steel skin. This wall-mounted swirl bowl designed fountain incorporates sensor operated stainless steel solenoid valves controlled by a transformer for hands-free operation. A pressure regulator is used to adjust the bubbler flow according to incoming water pressures.

• Touchless operation for safety and peace of mind
• Vandal resistant components include the bubblers, bowls, drains and bottom plates
• 18-gauge Type 304 high-polished stainless steel bowl assembly mounted on a 14-gauge Type 304 high-polished stainless steel wall bracket
• 30-second obstruction time-out to reduce tampering of sensor
• 100% lead-free waterways
• 1 gpm (3.78 L) bottle filler laminar flow
• Grille slots are designed to eliminate sharp edges and are backed with a foam filter to protect the fan motor and high displacement compressor from debris
• Designed to run at a low energy usage, this water cooler is assured to have a long-lasting life
• Laminar flow prevents splashing, keeping the drinking area contained and clean
• Beautiful polished finish resists stains and corrosion
• The bottle filler requires a mounting plate; either the 6700 in-wall or the 6700R on-wall support plate. (See options below)

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.

Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.

The Haws 1011HPSMS-1920HPSHO ADA Hi-Lo vandal-resistant polished stainless-steel drinking fountain and touchless bottle filler uses patented stainless steel, push-button activated, valve assemblies allowing for front access stream adjustment as well as cartridge and strainer access. This wall mounted fountain incorporates a sensor operated stainless steel solenoid valve controlled by a transformer for hands-free operation on the bottle filler, and offers the ‘only’ all stainless-steel valve body that is machined out of solid bar stock on the fountain. It is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer and has front access to the water stream height adjustment for easy maintenance without having to remove the valve.

• Only stainless steel valve body that is machined out of solid bar stock
• 18 gauge Type 304 Stainless Steel bowl assemblies mounted on a 14 gauge Type 304 Stainless Steel wall brackets
• Vandal resistant components include bubblers, bowls, buttons, drains and bottom plates
• 30-second obstruction time-out to reduce tampering of sensor
• Front access plate allows for front access of P-trap and stop
• 100% lead-free waterways
• Polished chrome-plated brass bubbler heads with integral laminar anti-squirt flow eliminate water splash
• 1 gpm (3.78 L) bottle filler laminar flow
• Easy maintenance with front access to valve adjustment and cartridge replacement
• Beautiful polished finish resists stains and corrosion
• “Hi-Lo” design allows for twice the users as regular fountains and suits the needs for various user heights
• The bottle filler requires a mounting plate; either the 6700 in-wall or the 6700R on-wall support plate. (See options below)

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.

Model H1001.8HPS-1920HPSHO ADA vandal-resistant polished stainless steel electric water cooler and touchless bottle filler provides 8 gph (30.3 L) chilled water performance in an engineered stainless steel skin. This wall-mounted swirl bowl designed fountain and bottle filler incorporates a touchless sensor operated stainless steel solenoid valve controlled by a transformer for hands-free operation on the bottle filler, and offers the ‘only’ all stainless-steel valve body that is machined out of solid bar stock on the fountain. It is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer and has front access to the water stream height adjustment for easy maintenance without having to remove the valve. Outfitted with such protective features as vandal-resistant bubbler head, waste strainer, and bottom plate, this electric water cooler is quick to discourage vandals.

• Only stainless steel valve body that is machined out of solid bar stock
• 18-gauge Type 304 polished stainless steel bowl assembly mounted on a 14-gauge Type 304 polished stainless steel wall bracket
• Vandal resistant components include the bubbler, bowl, button, drain and bottom plates
• 30-second obstruction time-out to reduce tampering of sensor
• 100% lead-free waterways
• 1 gpm (3.78 L) bottle filler laminar flow
• Grille slots are designed to eliminate sharp edges and are backed with a foam filter to protect the fan motor and high displacement compressor from debris
• Maintenance is made easy with front access to valve adjustment and cartridge replacement
• Designed to run at a low energy usage, this water cooler is assured to have a long-lasting life
• Laminar flow prevents splashing, keeping the drinking area contained and clean
• Beautiful polished finish resists stains and corrosion
• The bottle filler requires a mounting plate; either the 6700 in-wall or the 6700R on-wall support plate (See options below)

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.

Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.

Model H1011.8HPS-1920HPSHO ADA vandal-resistant electric drinking fountain and touchless bottle filler provides 8 gph (30.3 L) chilled water performance in an engineered polished stainless steel skin. This wall-mounted swirl bowl designed fountain incorporates a sensor operated stainless steel solenoid valve controlled by a transformer for hands-free operation on the bottle filler, and offers the ‘only’ all stainless-steel valve body that is machined out of solid bar stock on the fountain. It is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer and has front access to the water stream height adjustment for easy maintenance without having to remove the valve. Outfitted with such protective features as vandal-resistant bubbler heads, waste strainer, and bottom plates, these electric water coolers are quick to discourage vandals.

• Only stainless steel valve body that is machined out of solid bar stock
• 18-gauge Type 304 high-polished stainless steel bowl assembly mounted on a 14-gauge Type 304 high-polished stainless steel wall bracket
• Vandal resistant components include the bubblers, bowls, buttons, drains and bottom plates
• 30-second obstruction time-out to reduce tampering of sensor
• 100% lead-free waterways
• 1 gpm (3.78 L) bottle filler laminar flow
• Grille slots are designed to eliminate sharp edges and are backed with a foam filter to protect the fan motor and high displacement compressor from debris
• Designed to run at a low energy usage, this water cooler is assured to have a long-lasting life
• Laminar flow prevents splashing, keeping the drinking area contained and clean
• Maintenance is made easy with front access to valve adjustment and cartridge replacement
• Beautiful polished finish resists stains and corrosion
• The bottle filler requires a mounting plate; either the 6700 in-wall or the 6700R on-wall support plate. (See options below)

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.

Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.

The Haws 1011HPS-1920HPSHO ADA Hi-Lo high-polished stainless-steel vandal-resistant drinking fountain and touchless bottle filler incorporates a sensor operated stainless steel solenoid valve controlled by a transformer for hands-free operation on the bottle filler, and offers the ‘only’ all stainless-steel valve body that is machined out of solid bar stock on the fountain. It is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer and has front access to the water stream height adjustment for easy maintenance without having to remove the valve.

• Only stainless steel valve body that is machined out of solid bar stock
• 18 gauge Type 304 high-polished stainless steel bowl assemblies mounted on a 14 gauge Type 304 high-polished stainless steel wall brackets
• Vandal resistant components include bubblers, bowls, buttons, drains and bottom plates
• 30-second obstruction time-out to reduce tampering of sensor
• 100% lead-free waterways
• Polished chrome-plated brass vandal-resistant bubbler heads with integral laminar anti-squirt flow eliminate water splash
• 1 gpm (3.78 L) bottle filler laminar flow
• Easy maintenance with front access to valve adjustment and cartridge replacement
• Beautiful polished finish resists stains and corrosion
• “Hi-Lo” design allows for twice the users as regular fountains and suits the needs for various user heights
• The bottle filler requires a mounting plate; either the 6700 in-wall or the 6700R on-wall support plate. (See options below)

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.

The Haws 1001HPSMS-1920HPSHO vandal-resistant polished stainless-steel ADA drinking fountain and touchless bottle filler incorporates a sensor operated stainless steel solenoid valve controlled by a transformer for hands-free operation on the bottle filler, and offers the ‘only’ all stainless-steel valve body that is machined out of solid bar stock on the fountain. It is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer and has front access to the water stream height adjustment for easy maintenance without having to remove the valve.

• Only stainless steel valve body that is machined out of solid bar stock
• 18 gauge Type 304 polished Stainless Steel bowl assembly mounted on a 14 gauge Type 304 polished Stainless Steel wall bracket
• Vandal resistant components include the bubbler, bowl, button, drain and bottom plates
• 1 gpm (3.78 L) bottle filler laminar flow.
• 30-second obstruction time-out to reduce tampering of sensor
• 100% lead-free waterways
• Front access plate allows for front access of P-trap and stop
• Polished chrome-plated brass bubbler head with integral laminar anti-squirt flow eliminate water splash
• Easy maintenance with front access to valve adjustment and cartridge replacement
• Beautiful polished finish resists stains and corrosion
• The bottle filler requires a mounting plate; either the 6700 in-wall or the 6700R on-wall support plate. (See options below)

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.

Model H1001.8HPSHO-1920HPSHO ADA vandal-resistant polished stainless steel touchless electric water cooler and bottle filler provides 8 gph (30.3 L) chilled water performance in an engineered stainless steel skin. This wall-mounted swirl bowl designed fountain and bottle filler incorporates sensor operated stainless steel solenoid valves controlled by a transformer for hands-free operation. A pressure regulator is used to adjust the bubbler flow according to incoming water pressures. Outfitted with such protective features as vandal-resistant bubbler head, waste strainer, and bottom plate, this electric water cooler is quick to discourage vandals.

• 18-gauge Type 304 polished stainless steel bowl assembly mounted on a 14-gauge Type 304 polished stainless steel wall bracket
• Vandal resistant components include the bubbler, bowl, drain and bottom plates
• Touchless operation for safety and peace of mind
• 30-second obstruction time-out to reduce tampering of sensor
• 100% lead-free waterways
• 1 gpm (3.78 L) bottle filler laminar flow
• Grille slots are designed to eliminate sharp edges and are backed with a foam filter to protect the fan motor and high displacement compressor from debris
• Designed to run at a low energy usage, this water cooler is assured to have a long-lasting life
• Laminar flow prevents splashing, keeping the drinking area contained and clean
• Beautiful polished finish resists stains and corrosion
• The bottle filler requires a mounting plate; either the 6700 in-wall or the 6700R on-wall support plate. (See options below)

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.

Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.

The Haws 1001HPS-1920HPSHO ADA vandal-resistant stainless-steel drinking fountain and touchless bottle filler incorporates a sensor operated stainless steel solenoid valve controlled by a transformer for hands-free operation on the bottle filler, and offers the ‘only’ all stainless-steel valve body that is machined out of solid bar stock on the fountain. It is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer and has front access to the water stream height adjustment for easy maintenance without having to remove the valve.

• Only stainless steel valve body that is machined out of solid bar stock
• Touchless operation on the bottle filler for safety and peace of mind
• Vandal resistant components include the bubbler, bowl, button, drain and bottom plates
• 18 gauge Type 304 polished stainless steel bowl assembly mounted on a 14 gauge Type 304 polished stainless steel wall bracket and bottle filler
• 1 gpm (3.78 L) bottle filler laminar flow
• 30-second obstruction time-out to reduce tampering of sensor
• 100% lead-free waterways
• Polished chrome-plated brass bubbler head with integral laminar anti-squirt flow eliminates water splash
• Beautiful polished finish resists stains and corrosion
• Trap and shut off must be in the wall
• The bottle filler requires a mounting plate; either the 6700 in-wall or the 6700R on-wall support plate. (See options below)

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.

Model H1001.8HPS-1920HPS ADA polished stainless steel vandal-resistant electric water cooler and bottle filler provides 8 gph (30.3 L) chilled water performance in an engineered stainless steel skin. This wall-mounted swirl bowl designed fountain and bottle filler offers the only all stainless-steel valve body that is machined out of solid bar stock, is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer, and has front access to the water stream height adjustment for easy maintenance without having to remove the valve. Outfitted with such protective features as vandal-resistant bubbler head, waste strainer, and bottom plate, this electric water cooler is quick to discourage vandals.

• Only stainless steel valve body that is machined out of solid bar stock
• 18-gauge Type 304 polished stainless steel bowl assembly mounted on a 14-gauge Type 304 polished stainless steel wall bracket
• Vandal resistant components include the bubbler, bowl, buttons, drain and bottom plates
• 100% lead-free waterways
• 1 gpm (3.78 L) bottle filler laminar flow
• Grille slots are designed to eliminate sharp edges and are backed with a foam filter to protect the fan motor and high displacement compressor from debris
• Maintenance is made easy with front access to valve adjustment and cartridge replacement
• Designed to run at a low energy usage, this water cooler is assured to have a long-lasting life
• Laminar flow prevents splashing, keeping the drinking area contained and clean
• Beautiful polished finish resists stains and corrosion
• The bottle filler requires a mounting plate; either the 6700 in-wall or the 6700R on-wall support plate (See options below)

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.

Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.

The Haws 1011HPSMSHO2-1920HPSHO ADA Hi-Lo vandal-resistant touchless polished stainless-steel drinking fountain and bottle filler incorporates sensor operated stainless steel solenoid valves controlled by a transformer for hands-free operation. A pressure regulator is used to adjust the bubbler flow according to incoming water pressures.

• 18 gauge Type 304 high-polished stainless steel bowl assemblies mounted on a 14 gauge Type 304 high-polished stainless steel wall brackets
• Vandal resistant components include bubblers, bowls, drains and bottom plates
• Touchless operation for safety and peace of mind
• 30-second obstruction time-out to reduce tampering of sensor
• Front access plate allows for front access of P-trap and stop
• 100% lead-free waterways
• Polished chrome-plated brass bubbler heads with integral laminar anti-squirt flow eliminate water splash
• 1 gpm (3.78 L) bottle filler laminar flow
• Beautiful polished finish resists stains and corrosion
• “Hi-Lo” design allows for twice the users as regular fountains and suits the needs for various user heights
• The bottle filler requires a mounting plate; either the 6700 in-wall or the 6700R on-wall support plate. (See options below)

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.

The Haws 1011HPSHO2-1920HPSHO ADA Hi-Lo high-polished stainless-steel vandal-resistant drinking fountain and bottle filler incorporates sensor operated stainless steel solenoid valves controlled by a transformer for hands-free operation. A pressure regulator is used to adjust the bubbler flow according to incoming water pressures.

• Touchless operation for safety and peace of mind
• Vandal resistant components include bubblers, bowls, drains and bottom plates
• 30-second obstruction time-out to reduce tampering of sensor
• 18 gauge Type 304 high-polished stainless steel bowl assemblies mounted on 14 gauge Type 304 high polished stainless steel wall brackets
• 100% lead-free waterways
• 1 gpm (3.78 L) bottle filler laminar flow
• Polished chrome-plated brass bubbler heads with integral laminar anti-squirt flow eliminate water splash
• Beautiful polished finish resists stains and corrosion
• “Hi-Lo” design allows for twice the users as regular fountains and suits the needs for various user heights
• The bottle filler requires a mounting plate; either the 6700 in-wall or the 6700R on-wall support plate. (See options below)

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.

The Haws 1001HPSMSHO-1920HPSHO ADA vandal-resistant touchless stainless-steel drinking fountain and bottle filler incorporates sensor operated stainless steel solenoid valves controlled by transformers for hands-free operation. A pressure regulator is used to adjust the bubbler flow according to incoming water pressures.

• Touchless operation for safety and peace of mind
• Vandal resistant components include the bubbler, bowl, drain and bottom plates
• 30-second obstruction time-out to reduce tampering of sensor
• High-polished 18 gauge Type 304 Stainless Steel bowl assembly mounted on a 14 gauge Type 304 Stainless Steel wall bracket
• Front access plate allows for front access of P-trap and stop
• 100% lead-free waterways
• 1 gpm (3.78 L) bottle filler laminar flow
• Polished chrome-plated brass bubbler head with integral laminar anti-squirt flow eliminates water splash
• Beautiful polished-stainless finish resists stains and corrosion
• The bottle filler requires a mounting plate; either the 6700 in-wall or the 6700R on-wall support plate. (See options below)

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.

Trouble viewing this website?

Without an up-to-date browser, you may have trouble with some of our features.

Update Now

Edge

Firefox

Chrome