Model HS12 in-wall mounting frame provides the maximum support and facilitates the installation of dual bubbler RIVIVE™ series fountains and bottle fillers. Mounted during “rough-in” phase of construction, this mounting frame allows the dual fountains to be easily and quickly installed.

• One-piece 12 gauge heavy duty mounting plate is welded to the 18 gauge wall frame
• Heavy gauge galvanized steel construction provides a solid support system for these dual bubbler fountains that is not only sturdy but provides a certain amount of corrosion resistance as well.
• Wall opening size required is 31-1/8″ wide, 47-7/8″ high, and 6″ deep (75.1 x 121.6 x 15.2 cm)
• Power cord included

Haws 3377BFG vandal-resistant bottle filler attachment for the 3377G pedestal drinking fountain uses a patented stainless steel push-button valve assembly allowing for front access stream adjustment as well as cartridge and strainer access. This pedestal mounted bottle filler offers the ‘only’ all stainless-steel valve body that is machined out of solid bar stock, is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer, and has front access to the water stream height adjustment for easy maintenance without having to remove the valve.

• Only stainless steel valve body that is machined out of solid bar stock
• 14 gauge bottle filler bracket, and 3/16″ (.47 cm) thick steel pedestal extension with rough unfinished galvanized surface provides an exceptional corrosion resistance
• Vandal resistant components include the button and bottom/access plates
• 100% lead-free waterways
• Maintenance is made easy with front access to valve adjustment and cartridge replacement
• 1 gpm (3.8 L) Laminar flow limits bottle filler from splashing, keeping the drinking area contained and clean

Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.

The Haws 3377G ADA outdoor vandal-resistant galvanized pedestal and stainless steel fountain incorporates a patented stainless steel push-button valve assembly allowing for front access stream adjustment as well as cartridge and strainer access. This pedestal mounted fountain offers the ‘only’ all stainless-steel valve body that is machined out of solid bar stock, is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer, and has front access to the water stream height adjustment for easy maintenance without having to remove the valve. Equipped with vandal resistant components, this fountain is not easily disrupted, quickly discouraging the worst of vandals.

• Only stainless steel valve body that is machined out of solid bar stock
• 14 gauge stainless steel bracket and 3/16″ (.47 cm) thick steel pedestal with rough unfinished galvanized surface provides an exceptional corrosion resistance
• Vandal resistant components include the bubbler, button, bowl, drain and bottom/access plates
• 100% lead-free waterways
• Maintenance is made easy with front access to valve adjustment and cartridge replacement
• Laminar flow prevents from splashing, keeping the drinking area contained and clean

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.

The Haws 3380G ADA outdoor vandal-resistant pedestal drinking fountain incorporates a patented stainless steel push-button valve assembly allowing for front access stream adjustment as well as cartridge and strainer access. This pedestal mounted fountain offers the ‘only’ all stainless-steel valve body that is machined out of solid bar stock, is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer, and has front access to the water stream height adjustment for easy maintenance without having to remove the valve. Equipped with vandal resistant components, this fountain is not easily disrupted, quickly discouraging the worst of vandals.

• Only stainless steel valve body that is machined out of solid bar stock
• Heavy-duty 11 gauge thick steel with rough unfinished galvanized surface provides an exceptional corrosion resistance in one of our toughest made fountains
• Vandal resistant components include the bubbler, button, bowl, drain and access plate
• 100% lead-free waterways
• Maintenance is made easy with front access to valve adjustment and cartridge replacement

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.

The Haws 3380GFR ADA outdoor vandal-resistant pedestal drinking fountain incorporates a freeze-resistant valve assembly to provide year round operation. Our fully engineered pneumatic valve assembly is one of the best in freeze-resistant technologies. The barrier-free design of the 3380GFR allows the circular pedestal to be placed securely in multiple locations without taking up excess space. Equipped with vandal resistant components, this fountain is not easily disrupted, quickly discouraging the worst of vandals.

• Heavy-duty 11 gauge thick steel with rough unfinished galvanized surface provides an exceptional corrosion resistance in one of our toughest made fountains
• Vandal resistant components include the bubbler, button, bowl, drain and bottom plate
• Consult with the local authority having jurisdiction before installation in order to determine if any additional regulations or requirements may apply

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.

Haws heavy-duty pedestal drinking fountains, like the 3202G, use a patented push-button stainless steel valve assembly allowing for front access stream adjustment as well as cartridge and strainer access. This pedestal mounted fountain offers the ‘only’ all stainless-steel valve body that is machined out of solid bar stock, is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer, and has front access to the water stream height adjustment for easy maintenance without having to remove the valve. The angled barrier-free design of the 3202G allows the square pedestal to be placed securely in multiple locations where a gravel fill is present or can be installed. Gravel fill and trough design completely eliminate the need for traditional drains that can be clogged with sand and other contaminates. Fountain comes further equipped with multiple vandal resistant components, making it uneasily disrupted, quickly discouraging the worst of vandals.

• Only stainless steel valve body that is machined out of solid bar stock
• Heavy-duty 12 gauge fabricated steel; with rough unfinished galvanized surface provide an exceptional vandal-resistance and corrosion resistant product
• 100% lead-free waterways
• Maintenance is made easy with front access to valve adjustment and cartridge replacement
• Welded heavy-duty bubbler guard protects the drinking point from misuse
• Large access panel allows for a comfortable fit when adjusting components or when maintenance is needed

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.

The Haws 3300G outdoor galvanized coated pedestal drinking fountain incorporates a patented push-button valve assembly allowing for front access stream adjustment as well as cartridge and strainer access. This pedestal mounted fountain offers the ‘only’ all stainless-steel valve body that is machined out of solid bar stock, is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer, and has front access to the water stream height adjustment for easy maintenance without having to remove the valve. The “Hi-Lo” barrier-free design of the 3300G allows the square pedestal to be placed securely in multiple locations, all while providing for twice the users as regular drinking fountains. Equipped with vandal resistant components, this fountain is not easily disrupted, quickly discouraging the worst of vandals.

• Only stainless steel valve body that is machined out of solid bar stock
• Heavy-duty 11 gauge rough unfinished galvanized surface steel provides exceptional corrosion resistance in one of the most vandal-resistant fountains Haws produces
• Vandal resistant components include the bubbler, button, drain and bottom/access plates
• Easy maintenance with front access to valve adjustment and cartridge replacement
• 100% lead-free waterways

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.

The Haws 1025G outdoor barrier-free vandal-resistant drinking fountain uses a patented push-button stainless steel valve assembly allowing for front access stream adjustment as well as cartridge and strainer access. This wall mounted fountain offers the ‘only’ all stainless-steel valve body that is machined out of solid bar stock, is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer, and has front access to the water stream height adjustment for easy maintenance without having to remove the valve.

• Only stainless steel valve body that is machined out of solid bar stock
• Heavy-duty 11 gauge fabricated galvanized steel provides exceptional corrosion resistance in one tough built fountain
• Vandal resistant components include the bubbler, button, drain and bottom plate
• 100% lead-free waterways
• Maintenance is made easy with front access to valve adjustment and cartridge replacement
• Welded heavy-duty bubbler guard protects the drinking point from misuse

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.

Trouble viewing this website?

Without an up-to-date browser, you may have trouble with some of our features.

Update Now

Edge

Firefox

Chrome