The Haws 8606SS walk-through booth enclosed combination shower and eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly. This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eye washes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain. AXION MSRÂ also offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim of normal showerheads, making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets.
- Type 304 Stainless Steel dual-entry walk-through booth and piping construction with a satin finish
- Integral center location drain strainer
- Install flexibility with top or bottom inlet supply
- Large universal labeling and signage for easy locating
- Eyewash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
- A great addition to unsafe environments where the eyes, face, and body may be exposed to corrosive materials
- Requires minimal maintenance and is equipped with test card to record weekly testing
- Reducing installation time, the entire unit is pre-built and fully pressure tested
Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.
8605SS – AXION® MSR Stainless Steel Booth Enclosed Shower and Eye/Face WashThe Haws 8605SS booth enclosed combination shower and eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eye washes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain. AXION MSR also offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim of normal showerheads, making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets.
- Type 304 Stainless Steel booth and piping construction with a satin finish
- Integral center location drain strainer
- Install flexibility with top or bottom inlet supply
- Large universal labeling and signage for easy locating
- Eyewash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
- A great addition to unsafe environments where the eyes, face, and body may be exposed to corrosive materials
- Requires minimal maintenance and is equipped with test card to record weekly testing
- Reducing installation time, the entire unit is pre-built and fully pressure tested
Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.
SP259 – Shower Ball ValveModel SP259 is an emergency shower, chrome-plated brass, stay-open, 1″ NPT ball valve with stainless steel ball and stem for horizontal or vertical installation. For a horizontal installation, also order handle part number 0410000858.
8315CTFP.220V.8 – AXION® MSR Freeze-Protected Shower and Eye/Face WashHaws Model 8315CTFP.220V.8 heat traced combination 220 VAC shower and eye/face wash with redundant freeze bleed valve shall include the 3-way “easy activation, easy return” valve design that provides less ‘dead leg’ water, reducing the threat of Legionella growth. The compact design also allows for economical, safe and fast shipment via UPS. Also provided is the AXION® MSR hydrodynamic designed green ABS plastic 10-5/8″ (26.9 cm) showerhead with integral self-regulating 20 gpm flow control, and AXION MSR eye/face wash head shall feature inverted directional laminar flow which achieves Zero Vertical Velocity™ supplied by an integral 4 gpm flow control. Unit shall also include thermostatically controlled electric heat traced cable protected by 1″ (2.5 cm) insulation and an ABS plastic green jacket that prevents freezing down to ambient temperatures of -30° F, powder-coated cast-iron 9″ (22.9 cm) diameter floor flange, universal sign, 1-1/4″ NPT supply, and rated Class 1, Div 2, Group B, C & D with 1.09 amp max. (For Class 1, Div 1 application, please see the 8317CTFPC1D1)
- Unique 3-way valve design reduces the amount of “dead leg” water in the system resulting in less opportunity for Legionella growth
- “Easy activation, easy return” static handle eliminates free-floating pull handle designs
- Reduced packaging size allows for UPS shipment with greatly lowered chance for shipping mishaps
- Perfect for extreme weather conditions dropping down to -30° F (-34.4° C)
- Eyewash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
- Electrical system and pressurized plumbing are factory-built and tested
- Basic layout is configurable to accept a variety of accessories to suit each specific installation, including thermal actuator bleed valves, drench hose, foot treadle, and re-circulation loop
- Galvanized steel pipe and fittings requires minimal maintenance and is equipped with test card to record weekly testing
- Rated Class 1, Div 2, Group B, C & D. Temperature code T6. Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment. Model is CSA electrical certified, TYPE 4. (Nema 4 equivalent)
The Haws 1117L-1920 adjustable barrier-free Hi-Lo vandal-resistant drinking fountain and bottle filler uses patented stainless steel, push-button activated, valve assemblies allowing for front access stream adjustment as well as cartridge and strainer access. This wall mounted fountain offers the ‘only’ all stainless-steel valve body that is machined out of solid bar stock, is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer, and has front access to the water stream height adjustment for easy maintenance without having to remove the valve.
- 100% lead free waterways
- Vandal resistant components include the bubbler, buttons, drain and bottom plates
- Easy maintenance with front access to valve adjustment and cartridge replacement
- 1 gpm (3.78 L) bottle filler laminar flow
- Beautiful satin finish resists stains and corrosion
- 14 gauge Type 304 Stainless Steel design provides a well-constructed sturdy fountain
- “Hi-Lo” adjustable design allows for twice the users as regular fountains and suits the needs for various user heights
- Soft rounded corners prevent from mishaps and other accidents that may occur once the fountain is installed
- One-piece stamped bowls with low-profile basin make for an aesthetically pleasing and durable design
- The bottle filler requires a mounting plate; either the 6700 in-wall or the 6700R on-wall support plate. (See options below)
Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and NSF/ANSI/CAN 61: Q ≤ 1.
8730 – ePOD™ Indoor/Outdoor Heated Shower and Eye/Face Wash BoothModel 8730 ePOD™ enclosed shower and eye/face wash unit provides a sheltered, safe environment for the use of the safety shower and/or eyewash station. While it does not provide its own tempering system, the 8730 can be coupled with a separate tempering unit or an ANSI compliant water source to provide a refuge from the elements to maintain a comfortable space for victim response. It shall include a completely enclosed 5’ x 5’ (1.52 x 1.52m) all-weather, aluminum structure covered with safety green chemical and UV resistant polyester based powder coating which provides an optional operating temperature range of -50° to 120° (-45° to 48.9° C). It shall include spring-loaded, self-closing shower doors, is trimmed with large directional arrows, universal shower/eyewash sign, fiberglass floor grate, and 3″ IPS inside caulk drain. There is a 20 gpm (75.7 L) AXION® hydrodynamic showerhead, an eye/face wash that features the medically acclaimed AXION® MSR eye/face wash head assembly. Chrome-plated brass stay-open shower and eye/face ball valves equipped with stainless steel ball and stem, and can be protected by scald and freeze bleed valves. The internal booth temperature can be maintained by an optional space heater. The available alarm system is proximity switch activated, and provides local audible and visible alarms. Combination shower and eyewash is certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment. For the electrical certification, the system is certified by accredited Certification Body.
- Standardized platform provides shorter lead times and customizable configuration options
- High visibility safety green for quick visual placement during an emergency
- AXION technology with inverted eye/face wash and hydrodynamic shower flows
- Ready-to-incorporate design variations including hot water supply, electrical type, temperature control, stainless steel piping, and more
Model 8720 ePOD™ indoor/outdoor insulated overhead tank heated enclosed shower and eye/face wash expands upon the unique Overhead Tank Shower design of the 8770 by adding and enclosed booth for victim protection and comfort. This enclosure allows the 8720 to be placed both indoors and outdoors in locations with extreme weather and exposure in order to maintain victim comfort and to protect both the equipment and users from exposure to dirty and harsh conditions. It shall include a 5’ x 5’ (1.52 x 1.52 m) bright green, chemically resistant, water-proof coated booth made with an aluminum base, frame, and enclosure. This superior design provides optional operating temperature ranges of -50° to 120° F (-40° to 49° C), and shall include spring-loaded, self-closing shower doors. The booth is with large directional arrows, large and small universal shower/eyewash signs, fiberglass floor grate, and 3” IPS floor drain. The use of an Advanced Programmable Monitoring Control System allows for real-time control of the operating system. The internal booth temperature is maintained by a space heater. The overhead 530-gallon (2006 L) tanks is constructed of insulated HDPE with water temperature controlled by immersion heating. Optional model 9084 cleansing stick can be used to provide continual protection against pathogenic bacteria in the water for up to 3 years. The standard electrical system comes with 480V 3ph standard (other voltages available). Emergency flushing is provided by an AXION® MSR eye/face wash head with greater than 3 gpm flow. The entire system meets the ANSI Z358.1 standard for emergency eyewash and shower equipment.
- Standardized platform provides shorter lead times and customizable configuration options
- High visibility safety green for quick visual placement during an emergency
- Best alternative to supply emergency protection when no potable water is available
- Advanced Programmable Monitoring Control System with real-time digital display
- AXION technology with inverted eye/face wash and hydrodynamic shower flows
- Ready-to-incorporate design variations including hot water supply, electrical type, temperature control, stainless steel piping, and more
Model 8760 ePOD™ shower and eye/face wash tempering skid mixes it’s pre-heated water supply in its onboard storage tank with low temperature facility water through its Haws Tempered Water Blending System, to produce an ANSI compliant water supply for all safety equipment in the plumbed system. It shall include an aluminum channel 5′ x 5′ (1.5 x 1.5 m) frame with a composite equipment platform, with safety green chemical and UV resistant polyester based powder coating. There is a 20 gpm (75.7 L) AXION shower head, an eyewash that features the medically acclaimed AXION® MSR eye/face wash head assembly. This single shower and/or eyewash or multiple shower/eyewash tempering unit provides an operating temperature range of 35° to 120° F (1.67° to 48.9° C), supplied with 480V single phase tie in, and is designed to operate with a number of tempering and electrical options. The tempered water blending system will include an integral hot water supply, and will incorporate fail-safe features like anti-scald protection and full flow cold water bypass. The electrical system can be easily adapted to voltages upon request. Combination shower and eyewash is certified by CSA to meet the ANSI Z358.1 Standard for emergency Eyewash and Shower Equipment. For the electrical certification, the system is certified by accredited Certification Body.
- Standardized platform provides shorter lead times and customizable configuration options
- Advanced Programmable Monitoring Control System with real-time digital display
- High visibility safety green for quick visual placement during an emergency
- AXION technology with inverted eye/face wash and hydrodynamic shower flows
- Ready-to-incorporate design variations including hot water supply, electrical type, temperature control, stainless steel piping, and more
Model 8780 skid-mounted tempering system is the heart of the Haws Integrated tempering solutions line, offering a wide range of options to apply the equipment to an extensive range of water tempering solutions. The 8780 tempering skid mixes it’s pre-heated water supply in its onboard storage tank with low temperature facility water through its Haws Tempered Water Blending System, to produce an ANSI compliant water supply for all safety equipment in the plumbed system. Included is an aluminum 5′ x 5′ (1.5 x 1.5 m) frame with a composite equipment platform, with HYTEX Black chemical and UV resistant polyester based powder coating. This multiple shower and eyewash feeder provides an operating temperature range of 35° to 120° F (45.5° to 48.9° C), and is designed to operate with a number of tempering and electrical options. The standard tempered water blending system includes a 318 gallon hot water tank with 480V 1ph, and will incorporate fail-safe features like anti-scald protection and full flow cold water bypass. The electrical system can be easily adapted to voltages upon request.
- Standardized platform provides shorter lead times and customizable configuration options
- Ready-to-incorporate design variations including hot water supply, electrical type, blending capabilities, stainless steel piping, and more
- Optional VFD/Pump package for recirculation and/or pressure boosting applications
Model 8785 enclosed tempering system can be placed into any environment. Whether the intent is the protect the equipment from dirty or contaminated environments, shield from unpredictable outdoor weather, or provide a heated/cooled enclosure in extreme temperature installations the 8785 is your go-to choice for a rugged yet flexible water tempering skid solution. It shall include an all-weather 5′ x 5′ (1.52 x 1.52m) booth which provides optional operating temperature ranges of -50° to 120° F (-45.5° to 49.8° C), and is constructed of corrosion resistant aluminum paneling with polyester based powder coating. This single or multiple showers and/or eyewash tempering water unit with galvanized piping is designed to operate with several tempering and electrical options. Standard hook-up is a 480V, three phase inlet inside a NEMA 4 enclosure. The internal booth temperature can be maintained by an optional space heater. The tank water temperature is maintained by an immersion heater. The electrical system can be easily adapted to voltages upon request. The 8785 tempering booth utilizes the Haws Tempered Water Blending System to provide tempered water under dire situations, and incorporates fail-safe features like anti-scald protection and full flow cold water bypass in the event of hot water failure. 1-1/2″ tepid and cold water inlets.
- Standardized platform provides shorter lead times and customizable configuration options
- Ready-to-incorporate design variations including hot water supply, electrical type, blending capabilities, stainless steel piping, and more
- Fully assembled and tested for quick placement and hook-up
Model 8356WCC barrier-free, wall-mounted, fully recessed combination shower and eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). The revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eye washes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain.
Emergency combination unit is equipped with a stainless steel drain pan, so when the irrigation process begins, the unit is draining waste properly. AXION MSR also offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim of normal showerheads, making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets.
- Eyewash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
- Flexible design of the shower allows for flush in the ceiling mounting, or to hang down from the ceiling
- Easy access exterior mounted in-line strainer
- One piece drain tray catches waste fluid during eyewash use
- 18 Gauge Type 304 Stainless Steel recessed cabinet is a deep-drawn heavy duty structure with smooth electro-polished finish
- Reducing installation time, eyewash and valve assembly are pre-built and fully water/pressure tested
Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.
8309WC – AXION® MSR Combination Shower and Eye/Face WashModel 8309WC barrier-free combination shower and eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly. This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain. AXION MSR also offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim of normal showerheads, making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets.
- Eyewash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
- AXION MSR ABS plastic drench showerhead with flow control delivers dispersed flow for uniform drenching
- Barrier-free design offers a low profile loop assembly allowing for better wheel chair access as well as a longer pull rod for shower activation
- Also features a stainless steel push flag for eyewash activation, a round 11″ (27.9 cm) stainless steel bowl, stainless steel pull rod for shower activation, and ball valves with stainless steel ball and stem for durability
- Pipe and fitting: 1-1/4″ Schedule 40 hot-dipped galvanized steel. Supply and Waste: 1-1/4″ NPT
- ANSI Z358.1 tempering compliance options
Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.