Model TWBS.EW.H An on-demand, prepackaged, fully engineered and tested tempering system to provide tempered water instantaneously. System is designed to increase cold water temperature by a minimum of 34° F (19° C) at 4 gpm (15.1 L) flow and 68° F (38° C) at 2.0 gpm (7.5 L); thus it is suitable for single eyewash application. Outlet water temperature is factory set at 80° F (26° C).
- It is ideal for areas where supply water temperatures fall below 60° F (15° C) while hot water is not present
- System consists of an 20 KW electrical instantaneous water heater, a hot shutoff valve, a bypass valve, an in-line 50 x 50 mesh filter, and an outlet temperature gauge
- Requires 45 – 90 psi (3 – 6 ATM) flowing pressure
- Inlet and Outlet: 1/2″ IPS.
- Electrical Supply: 480 VAC, 3-phase, 3 wire and ground. 24 amp per phase (optional 208/240 3-phase available – ask for quote).
- UL listed for indoor use only.
The Haws Model 9321 Tankless Heater Solution, an electric water heating system designed to eliminate the need for large water storage tanks, as well as the continuous energy demand to maintain them at higher temperatures. This system will provide safety showers and eyewashes with an unlimited supply of tepid water with flow rates up to 30 gpm, eliminating the “recovery time” needed to reheat large storage tanks after use. Unit measures 18″ H x 27″ W x 11″ D. Unit is designed to be wall mounted.
9326 – Instantaneous Electric Water Heating SystemThe Haws Model 9326 Tankless Heater Solution, an electric water heating system designed to eliminate the need for large water storage tanks, as well as the continuous energy demand to maintain them at higher temperatures. This instantaneous eyewash water heater will provide safety showers and eyewashes with an unlimited supply of tepid water with flow rates up to 30 gpm, eliminating the “recovery time” needed to reheat large storage tanks after use. Manufactured with NSF-61 listed materials. Unit measures 30″ x 24″ x 13.5″. For all options, the cabinet will measure 30″ x 36″ x 17.3″.
9327 – Instantaneous Electric Water Heating SystemThe Haws Model 9327 Tankless Heater Solution, an electric water heating system enclosed in a stainless steel NEMA4X rated cabinet, designed to eliminate the need for large water storage tanks, as well as the continuous energy demand to maintain them at higher temperatures. This system will provide safety showers and eyewashes with an unlimited supply of tepid water, eliminating the “recovery time” needed to reheat large storage tanks after use. Unit measures 30″ x 24″ x 13.5″. For all options, the cabinet will measure 30″ x 36″ x 17.3″.
9400 – AXION® Steam Water HeaterThe Haws 9400 AXION® Steam Water Heater replaces hot water tanks when pressurized steam is available. When an emergency shower or eyewash is activated, the flow of water opens a steam control valve. The steam enters a brazed plate heat exchanger, instantly heating the water. This mixing valve blends hot and cold water to produce an output of 80° F (27° C ) tepid water. Additional valves keep the system preheated, freeze protected and scald protected. The steam valve will remain closed should there be a loss of water pressure. This station complies with the ANSI Z358.1 standard and mixing valve is designed to meet ASSE 1071
- For important installation information, please read Scald Warning.
The Haws 9400LPS AXION® Low Pressure Steam Water Heater replaces hot water tanks when pressurized steam is available. When an emergency shower or eyewash is activated, the flow of water opens a steam control valve. The steam enters a brazed plate heat exchanger, instantly heating the water. This mixing valve blends hot and cold water to produce an output of 80° F (27° C) tepid water. Additional valves keep the system preheated, freeze protected and scald protected. The steam valve will remain closed should there be a loss of water pressure. This station complies with the ANSI Z358.1 standard and mixing valve is designed to meet ASSE 1071
- For important installation information, please read Scald Warning.
