The Haws 1119FRP barrier-free Hi-Lo vandal-resistant drinking fountain and bottle filler incorporates fully engineered pneumatic operated freeze-resistant valve assemblies. Wall mounted design allows the 1119FR to be placed securely in multiple locations without taking up excess space. Equipped with vandal resistant components, this fountain is not easily disrupted, quickly discouraging vandals.

• 18 gauge Type 304 Stainless Steel design provides a well constructed sturdy fountain
• Vandal resistant components include the bubblers, buttons, drains and bottom plates
• Valves are installed in an area where the temperature remains at a minimum of 50° F (10° C) so the fountain remains fully functional in freezing conditions
• Drip tray for bottle placement during filling
• 1 gpm (3.78 L) laminar flow bottle filler
• Beautiful satin finish resists stains and corrosion
• Soft rounded corners prevent mishaps and other accidents that may occur once the fountain is installed
• “Hi-Lo” design allows for twice the users as regular fountains and suits the needs for various user heights
• One-piece stamped bowls make for an aesthetically pleasing and durable design
• The bottle filler requires a mounting plate; either the 6700 in-wall or the 6700R on-wall support plate. (See options below)

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains and electric water coolers to be lead-free by all known definitions including NSF/ANSI Standard 61, Section 9, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and NSF/ANSI/CAN 61: Q ≤ 1.

The Haws 1119FRB barrier-free Hi-Lo vandal-resistant drinking fountain uses fully engineered pneumatic operated freeze-resistant valve assemblies. Wall mounted design allows it to be placed securely in multiple locations without taking up excess space. Equipped with vandal resistant components, this fountain is not easily disrupted, quickly discouraging vandals.

• 18 gauge Type 304 Stainless Steel design provides a well constructed sturdy fountain
• Vandal resistant components include the bubblers, buttons, drains and bottom plates
• Valves are installed in an area where the temperature remains at a minimum of 50° F (10° C) so the fountain remains fully functional in freezing conditions
• Beautiful satin finish resists stains and corrosion
• Soft rounded corners prevent mishaps and other accidents that may occur once the fountain is installed
• “Hi-Lo” design allows for twice the users as regular fountains and suits the needs for various user heights
• One-piece stamped bowls make for an aesthetically pleasing and durable design

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains and electric water coolers to be lead-free by all known definitions including NSF/ANSI Standard 61, Section 9, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and NSF/ANSI/CAN 61: Q ≤ 1.

The Haws 1109FRP barrier-free vandal-resistant drinking fountain and bottle filler includes fully engineered pneumatic operated freeze-resistant valve assemblies for continual use during winter months. Wall mounted design allows the unit to be placed securely in multiple locations without taking up excess space. Equipped with vandal resistant components, this fountain is not easily disrupted, quickly discouraging vandals.

• 18 gauge Type 304 Stainless Steel design provides a well constructed sturdy fountain
• Drip tray for bottle placement during filling
• Vandal resistant components include the bubbler, buttons, drain and bottom plates
• Valves are installed in an area where the temperature remains at a minimum of 50° F (10° C), this unit will assist the fountain in remaining fully functional in freezing conditions
• Flow is easily adjustable with supplied regulator valves
• Beautiful satin finish resists stains and corrosion
• Soft rounded corners prevent mishaps and other accidents that may occur once the fountain is installed
• One-piece stamped bowl makes for an aesthetically pleasing and durable design
• The bottle filler requires a mounting plate; either the 6700 in-wall or the 6700R on-wall support plate. (See options below)

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and NSF/ANSI/CAN 61: Q ≤ 1.

The Haws 1109FRB barrier-free vandal-resistant drinking fountain includes a fully engineered pneumatic operated freeze-resistant valve assembly for continual use during winter months. Wall mounted design allows the unit to be placed securely in multiple locations without taking up excess space. Equipped with vandal resistant components, this fountain is not easily disrupted, quickly discouraging vandals.

• 18 gauge Type 304 Stainless Steel design provides a well constructed sturdy fountain
• Vandal resistant components include the bubbler, button, drain and bottom plate
• Valve is installed in an area where the temperature remains at a minimum of 50° F (10° C), this unit will assist the fountain in remaining fully functional in freezing conditions
• Flow is easily adjustable with supplied regulator valve
• Beautiful satin finish resists stains and corrosion
• Soft rounded corners prevent mishaps and other accidents that may occur once the fountain is installed
• One-piece stamped bowl makes for an aesthetically pleasing and durable design

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and NSF/ANSI/CAN 61: Q ≤ 1.

The Haws 3603FR heavy-duty outdoor freeze-resistant ADA vandal-resistant pedestal drinking fountain can be configured in multiple variations before or after installation. This product is standard with three drinking fountain stations, with the option of adding/changing a drinking fountain, bottle filler, dog bowl and/or hose bib at any time. Water delivery is provided by a fully engineered pneumatic valve assembly that is one of the best in freeze-resistant technologies, and provides year-round operation. Equipped with vandal resistant components for long lasting durability.

• ADA compliant standing adult height, wheel chair, and child wheel chair arm positions to accommodate all users
• Vandal resistant components include the bubblers, buttons, drains and access plates
• Heavy-duty fabricated stainless steel with matte silver powder-coated finish
• Bowl and bubbler head can be rotated for location needs
• Custom color options available
• 100% lead-free waterways
• Consult with the local authority having jurisdiction before installation in order to determine if any additional regulations or requirements may apply

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and NSF/ANSI/CAN 61: Q ≤ 1.

The Haws 7603TH is an ideal, cost-efficient solution for a facility’s ANSI eyewash requirements in locations without access to a continuous potable water source. The pressurized 15 gallon (56.8 L) portable hazardous location eyewash uses a NEMA 4 heated, insulated blanket to provide ANSI compliant tempered water in operating temperatures between -20° F (-30° C) and 100° F (38° C) for locations without access to a continuous potable water source.

• Features a 15 gallon (56.8 L) stainless steel tank
• Upgraded ball valves with stainless steel ball and stem
• Protective measures include: air pressure gauge, pressure relief valve, and tire-type air fill valve
• Measurements: 39-1/2″ (100.3 cm) high, 16″ (40.6 cm) diameter
• 120VAC, 60Hz, 1.38A electrical requirement, with voltage options available
• Power cord not provided – power connection must be made according to code using Class I Division 2 compliant equipment
• CSA certified for NEMA/Type 4 in Class 1, Division 2, Group B, C, D, T6, and Class 2, Division 2, Group F, G locations; and to ANSI/ISEA Z358.1

The Haws 7603T240H is an ideal, cost-efficient solution for a facility’s ANSI eyewash requirements in locations without access to a continuous potable water source. The pressurized 15 gallon (56.8 L) portable hazardous location eyewash uses a NEMA 4 heated, insulated blanket to provide ANSI compliant tempered water in operating temperatures between -20° F (-30° C) and 100° F (38° C) for locations without access to a continuous potable water source.

• Features a 15 gallon (56.8 L) stainless steel tank
• Upgraded ball valves with stainless steel ball and stem
• Protective measures include: air pressure gauge, pressure relief valve, and tire-type air fill valve
• Measurements: 39-1/2″ (100.3 cm) high, 16″ (40.6 cm) diameter
• 240VAC, 50/60Hz, 0.64A electrical requirement
• Power cord not provided – power connection must be made according to code using Class I Division 2 compliant equipment
• CSA certified for NEMA/Type 4 in Class 1, Division 2, Group B, C, D, T6, and Class 2, Division 2, Group F, G locations; and to ANSI/ISEA Z358.1

The Haws 7603T240 is an ideal, cost-efficient solution for a facility’s ANSI eyewash requirements in locations without access to a continuous potable water source. The pressurized 15 gallon (56.8 L) portable eyewash uses a NEMA 4 heated, insulated blanket to provide ANSI compliant tempered water in operating temperatures between -20° F (-30° C) and 100° F (38° C) for locations without access to a continuous portable water source.

• Features a 15 gallon (56.8 L) stainless steel tank
• Upgraded ball valves with stainless steel ball and stem
• Protective measures include: air pressure gauge, pressure relief valve, and tire-type air fill valve
• Measurements: 39-1/2″ (100.3 cm) high, 16″ (40.6 cm) diameter
• 240VAC, 50/60Hz, 0.64A electrical requirement
• CSA certified for NEMA/Type 4 in ordinary locations, and to ANSI/ISEA Z358.1

The Haws 7603T is an ideal, cost-efficient solution for a facility’s ANSI eyewash requirements in locations without access to a continuous potable water source. The pressurized 15 gallon (56.8 L) portable eyewash uses a NEMA 3R heated, insulated blanket to provide ANSI compliant tempered water in operating temperatures between -20° F (-30° C) and 100° F (38° C) for locations without access to a continuous potable water source.

• Features a 15 gallon (56.8 L) stainless steel tank
• Upgraded ball valves with stainless steel ball and stem
• Protective measures include: air pressure gauge, pressure relief valve, and tire-type air fill valve
• Power cord included
• Measurements: 39-1/2″ (100.3 cm) high, 16″ (40.6 cm) diameter
• CSA certified for NEMA/Type 3R in ordinary locations, and to ANSI/ISEA Z358.1

Haws heated portable Model 7500EB is ideal for remote locations. Using gravity to supply a continuous flow of clean water to injured personnel for a full 15 minutes at .4 gpm (1.5 L), this model is a reliable source for safety. The 7500’s full patterned flushing feature is capable of being used in sub-freezing temperatures.

• Featuring a FDA approved high-density green polyethylene tank easily activated by pulling the yellow activation arm down to the open position
• 1000 Watt, 120 VAC submersible thermostatically controlled heater element
• Fully functional to -30° F (-34.4° C) and should stay between 65° and 75° F (18.3 and 23.9° C)
• Model supplied with 9′ (274.3 cm) power cord, 3-prong plug, and fitted insulated protective cover
• A wide-fill opening with threaded cap permits easy inspection, cleaning and filling
• Relocation is simple due to the easily mounted (bracket included) and light design of this 16 gallon (60.6 L) portable
• Measurements: 22-1/2″ high, 21-1/2″ wide, 19-1/2″ deep (57.2 x 54.6 x 49.5 cm)

Model 7500EB is certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment. Electrical components are UL rated.

The Haws 6518FR freeze-resistant valve system is a fully engineered pneumatic operated valve for use on all Haws single bubbler freeze-resistant pedestal fountains. The placement of the valve below the frost line allows the system to function when freezing conditions are present at surface level. Its fully accessible design allows for reliable service year round.

• Installed below the frost line, the valve remains fully functional under the worst of weather conditions, with the fountain remaining functional as well
• If a maintenance issue ever arises, rest assured that the valve assembly is easily removed and replaced without disrupting the remainder of the fountain
• Flow is easily adjustable with supplied regulator valve
• Unit is applicable for single pedestal mounted fountain designs
• Consult with the local authority having jurisdiction before installation in order to determine if any additional regulations or requirements may apply

Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and NSF/ANSI/CAN 61: Q ≤ 0.5.

The Haws 6518.2FR freeze-resistant valve system is a fully-engineered pneumatic operated valve for use on all Haws hi-lo two bubbler freeze-resistant pedestal fountains. The placement of the valve below the frost line allows the system to function when freezing conditions are present at surface level. Its fully accessible design allows for reliable service year round.

• Installed below the frost line, the valve remains fully functional under the worst of weather conditions, with the fountain remaining functional as well
• If a maintenance issue ever arises, rest assured that the valve assembly is easily removed and replaced without disrupting the remainder of the fountain
• Flow is easily adjustable with supplied regulator valve
• Unit is applicable for dual pedestal mounted fountain designs
• Consult with the local authority having jurisdiction before installation in order to determine if any additional regulations or requirements may apply

Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and NSF/ANSI/CAN 61: Q ≤ 0.5.

Trouble viewing this website?

Without an up-to-date browser, you may have trouble with some of our features.

Update Now

Edge

Firefox

Chrome