The Haws 1210SF wall-mount filtered ADA bottle filling station is the newest addition to the most comprehensive hydration offering in the industry. The modern, innovative design is tailored to meld with office spaces, universities and airports, or serve the functional needs of spaces like a school gymnasium. Sensor activated bottle filler allows for hands free operation, and intuitive LED electronic display keeps the user informed with how many plastic bottles have been saved. Fresh, always filtered water with the Electronic Lifecycle Control feature shuts water flow off when filter reaches its gallons capacity. Flow will begin again when filter is replaced.
- Energy-Efficient Refrigeration Evaporator: Enhanced tankless evaporator coil using thermal mass cooling technology, with 100 percent water content flushed with every use
- Hygienic hands-free sensor operated bottle filler with vandal-resistant sensor that resists scratching and water droplet fowling
- Auto-purge feature automatically cycles once every 24 hours to assure a fresh water supply as well as trap integrity
- LED illuminated bottle fill area
- Quick 1.1 GPM fill rate (depending on incoming pressure) for bottle filler
- Smart energy savings feature powers down refrigeration system after 2 hours of non-use, and will automatically start again when used
- Programmable to be shut-down during planned facility closures, weekends, etc.
- High traffic area ready with a 3000-gallon (11,356 L) capacity filter
- Raised platform for easy bottle resting and filling
- Durable, easy to clean 304 stainless-steel skin
- Retrofit installation compatibility over many existing water coolers
- 100% lead free waterways
- Galvanized steel frame
- Rated for indoor use
- Designed and assembled in the USA
CSA certified to comply with NSF/ANSI 42, NSF/ANSI 53, NSF/ANSI/CAN 61: Q ≤ 1, NSF/ANSI/CAN 372, ASME A112.18.1/CSA B125.1, UL 399 and CSA C22.2 No. 120. ADA compliant to ICC A117.1, CSA B651, DOJ’s 2010 ADA Standards for Accessible Design when properly installed. ASHRAE 18 compliant chilling capacity. FCC ID: 2AUAN-1200SM and IC: 25359-1200SM
Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine), and failure to heed these conditions may void warranty.
1210S – Wall Mount Indoor ADA Bottle FillerThe Haws 1210S indoor wall-mount ADA bottle filler is the newest addition to the most comprehensive hydration offering in the industry. The modern, innovative design is tailored to meld with office spaces, universities and airports, or serve the functional needs of spaces like a school gymnasium. Sensor-activated bottle filler allows for hands-free operation, and intuitive LED electronic display keeps the user informed with how many plastic bottles have been saved.
- Energy-Efficient Refrigeration Evaporator: Enhanced tankless evaporator coil using thermal mass cooling technology, with 100 percent water content flushed with every use
- Hygienic hands-free sensor operated bottle filler with vandal-resistant sensor that resists scratching and water droplet fowling
- Auto purge feature automatically cycles once every 24 hours to assure a fresh water supply as well as trap integrity
- LED illuminated bottle fill area
- Quick 1.1 GPM fill rate (depending on incoming pressure) for bottle filler
- Smart energy savings feature powers down refrigeration system after two hours of non-use, and will automatically start again when used
- Programmable to be shut-down during planned facility closures, weekends, etc.
- Raised platform for easy bottle resting and filling
- Durable, easy-to-clean 304 stainless-steel skin
- Retrofit installation compatibility over many existing competitor water coolers
- 100% lead free waterways
- Galvanized steel frame
- Rated for indoor use
- Designed and assembled in the USA
CSA certified to comply with NSF/ANSI/CAN 61: Q ≤ 1, NSF/ANSI/CAN 372, ASME A112.18.1/CSA B125.1, UL 399 and CSA C22.2 No. 120. ADA compliant to ICC A117.1, CSA B651, DOJ’s 2010 ADA Standards for Accessible Design when properly installed. ASHRAE 18 compliant chilling capacity. FCC and CAN ICES – 3(A)/NMB-3(A).
Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine), and failure to heed these conditions may void warranty.
1202SFH – Wall Mount Hi-Lo Indoor ADA Filtered Motion Activated Water CoolerThe Haws 1202SFH wall-mount filtered Hi-Lo touchless water cooler is the newest addition to the most comprehensive hydration offering in the industry. The modern, innovative design is tailored to meld with office spaces, universities and airports, or serve the functional needs of spaces like a school gymnasium. The Hi-Lo dual station design allows for standard left-side high/right-side low ADA fountain access. The sensor operated solenoid valves provide hands-free hygienic operation. The pressure-regulating bubblers with flexible antimicrobial rubber mouth guards requires no adjusting. Fresh, always filtered water with the Electronic Lifecycle Control feature shuts water flow off when filter reaches its gallons capacity. Flow will begin again when filter is replaced.
- Touchless operation for safety and peace of mind
- Flexible bubbler mouth guards to protect against injury
- Self-regulating flow – no need to adjust to varying incoming water pressures
- Anti-rotational screwed-in-place bubbler heads
- Energy-Efficient Refrigeration Evaporator: Enhanced tankless evaporator coil using thermal mass cooling technology, with 100 percent water content flushed with every use.
- Smart energy savings feature powers down refrigeration system after 2 hours of non-use and the lights are shut off, and will automatically start again when used or light is restored to normal
- High traffic area ready with a 3000-gallon (11,356 L) capacity filter
- Retrofit installation compatibility over many existing water coolers
- 100% lead free waterways
- Unique basin design reduces water splashing and simplifies cleaning
- Durable, easy to clean 304 stainless steel skin
- Galvanized steel frame
- Rated for indoor use
- Designed and assembled in the USA
CSA certified to comply with NSF/ANSI 42, NSF/ ANSI 53, NSF/ANSI/CAN 61: Q ≤ 1, NSF/ANSI/CAN 372, ASME A112.18.1/CSA B125, UL 399 and CSA C22.2 No. 120. ADA compliant to ICC A117.1, CSA B651, DOJ s 2010 ADA Standards for Accessible Design when properly installed. ASHRAE 18 compliant chilling capacity of 8.0 gallon per hour of 50 degree drinking water, based on 80 degree inlet water and 90 degree ambient temperature. FCC ID: 2AUAN-1200SFH and IC: 25359-1200SFH.
Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine), and failure to heed these conditions may void warranty.
1201SFH – Wall Mount Indoor ADA Filtered Motion Activated Water CoolerThe Haws 1201SFH wall mount filtered touchless ADA water cooler is the newest addition to the most comprehensive hydration offering in the industry. The modern, innovative design is tailored to meld with office spaces, universities and airports, or serve the functional needs of spaces like a school gymnasium. The sensor operated solenoid valve provides hands-free hygienic operation. The pressure-regulating bubbler with a flexible antimicrobial rubber mouth guard requires no adjusting. Fresh, always filtered water with the Electronic Lifecycle Control feature shuts water flow off when filter reaches its gallons capacity. Flow will begin again when filter is replaced.
- Touchless operation for safety and peace of mind
- Flexible bubbler mouth guard to protect against injury
- Self-regulating flow – no need to adjust to varying incoming water pressures
- Anti-rotational screwed-in-place bubbler head
- Smart energy saving feature powers down cooler during periods of non-use; great for evenings and weekends
- High traffic area ready with a 3000-gallon (11,356 L) capacity filter
- Energy-Efficient Refrigeration Evaporator: Enhanced tankless evaporator coil using thermal mass cooling technology, with 100 percent water content flushed with every use.
- Durable, easy to clean 304 stainless steel skin
- Retrofit installation compatibility over many existing water coolers
- 100% lead free waterways
- Unique basin design reduces water splashing and simplifies cleaning
- Galvanized steel frame
- Rated for indoor use
- Designed and assembled in the USA
CSA certified to comply with NSF/ANSI 42, NSF/ANSI 53, NSF/ANSI/CAN 61: Q ≤ 1, NSF/ANSI/CAN 372, ASME A112.18.1/CSA B125.1, UL 399 and CSA C22.2 No. 120. ADA compliant to ICC A117.1, CSA B651, DOJ s 2010 ADA Standards for Accessible Design when properly installed. ASHRAE 18 compliant chilling capacity of 8.0 gallon per hour of 50 degree drinking water, based on 80 degree inlet water and 90 degree ambient temperature. FCC ID: 2AUAN-1200SFH and IC: 25359-1200SFH.
Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine), and failure to heed these conditions may void warranty.
1212SH – Wall Mount Hi-Lo ADA Motion Activated Water Cooler and Bottle FillerThe Haws 1212SH wall-mount Hi-Lo ADA touchless water cooler with bottle filler is the newest addition to the most comprehensive hydration offering in the industry. The modern, innovative design is tailored to meld with office spaces, universities and airports, or serve the functional needs of spaces like a school gymnasium. The Hi-Lo dual station design allows for standard left-side high/right-side low ADA fountain access. The sensor operated solenoid valves provide hands-free hygienic operation, and pressure-regulating bubblers with flexible antimicrobial rubber mouth guards requires no adjusting. Sensor activated bottle filler allows for hands free operation, and intuitive LED electronic display keeps the user informed with how many plastic bottles have been saved.
- Touchless operation for safety and peace of mind
- Flexible bubbler mouth guard to protect against injury
- Self-regulating bubbler flow – no need to adjust to varying incoming water pressures
- Anti-rotational screwed-in-place bubbler head
- Energy-Efficient Refrigeration Evaporator: Enhanced tankless evaporator coil using thermal mass cooling technology, with 100 percent water content flushed with every use
- Hands-free bottle filler sensor operation
- Vandal-resistant sensor resists scratching and water droplet fowling
- LED illuminated bottle fill area
- Quick 1.1 GPM fill rate (depending on incoming pressure) for bottle filler
- Auto purge feature automatically cycles once every 24 hours to assure a fresh water supply as well as trap integrity
- Smart energy savings feature powers down refrigeration system after 2 hours of non-use and the lights are shut off, and will automatically start again when used or lights are restored to normal
- Programmable to be shut-down during planned facility closures, weekends, etc.
- Durable, easy to clean 304 stainless steel skin
- Retrofit installation compatibility over many existing water coolers
- 100% lead free waterways
- Unique basin design reduces water splashing and simplifies cleaning
- Galvanized steel frame
- Rated for indoor use
- Designed and assembled in the USA
CSA certified to comply with NSF/ANSI/CAN 61: Q ≤ 1, NSF/ANSI/CAN 372, ASME A112.18.1/CSA B125.1, UL 399 and CSA C22.2 No. 120. ADA compliant to ICC A117.1, CSA B651, DOJ’s 2010 ADA Standards for Accessible Design when properly installed. ASHRAE 18 compliant chilling capacity of 8.0 gallon per hour of 50 degree drinking water, based on 80 degree inlet water and 90 degree ambient temperature. FCC and CAN ICES – 3(A)/NMB-3(A).
Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine), and failure to heed these conditions may void warranty.
1212SFH – Wall Mount Hi-Lo Indoor ADA Filtered Motion Activated Water Cooler and Bottle FillerThe Haws 1212SFH wall-mount Hi-Lo filtered touchless water cooler is the newest addition to the most comprehensive hydration offering in the industry. The modern, innovative design is tailored to meld with office spaces, universities and airports, or serve the functional needs of spaces like a school gymnasium. The Hi-Lo dual station design allows for standard left-side high/right-side low ADA fountain access. The sensor operated solenoid valves provide hands-free hygienic operation, and the pressure-regulating bubblers with a flexible antimicrobial rubber mouth guards requires no adjusting. Sensor activated bottle filler allows for hands free operation, and intuitive LED electronic display keeps the user informed when the water is being filtered and how many plastic bottles have been saved. Fresh, always filtered water with the Electronic Lifecycle Control feature shuts water flow off when filter reaches its gallons capacity. Flow will begin again when filter is replaced.
- Touchless operation for safety and peace of mind
- Flexible bubbler mouth guard to protect against injury
- Self-regulating bubbler flow – no need to adjust to varying incoming water pressures
- Anti-rotational screwed-in-place bubbler head
- Energy-Efficient Refrigeration Evaporator: Enhanced tankless evaporator coil using thermal mass cooling technology, with 100 percent water content flushed with every use
- Hands-free bottle filler sensor operation
- Vandal-resistant sensor resists scratching and water droplet fowling
- Auto purge feature automatically cycles once every 24 hours to assure a fresh water supply as well as trap integrity
- LED illuminated bottle fill area
- Quick 1.1 GPM fill rate (depending on incoming pressure) for bottle filler
- Smart energy savings feature powers down refrigeration system after 2 hours of non-use and the lights are shut off, and will automatically start again when used or light is restored to normal
- Programmable to be shut-down during planned facility closures, weekends, etc.
- High traffic area ready with a 3000-gallon (11,356 L) capacity filter
- Durable, easy to clean 304 stainless steel skin
- Retrofit installation compatibility over many existing water coolers
- 100% lead free waterways
- Unique basin design reduces water splashing and simplifies cleaning
- Galvanized steel frame
- Rated for indoor use
- Designed and assembled in the USA
CSA certified to comply with NSF/ANSI 42, NSF/ANSI 53, NSF/ANSI/CAN 61: Q ≤ 1, NSF/ANSI/CAN 372, ASME A112.18.1/CSA B125.1, UL 399 and CSA C22.2 No. 120. ADA compliant to ICC A117.1, CSA B651, DOJ s 2010 ADA Standards for Accessible Design when properly installed. ASHRAE 18 compliant chilling capacity of 8.0 gallon per hour of 50 degree drinking water, based on 80 degree inlet water and 90 degree ambient temperature. FCC ID: 2AUAN-1200SFH and IC: 25359-1200SFH.
Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine), and failure to heed these conditions may void warranty.
1211SFH – Wall Mount Indoor ADA Filtered Motion Activated Water Cooler and Bottle FillerThe Haws 1211SFH wall-mount filtered ADA touchless water cooler with bottle filler is the newest addition to the most comprehensive hydration offering in the industry. The modern, innovative design is tailored to meld with office spaces, universities and airports, or serve the functional needs of spaces like a school gymnasium. The sensor operated solenoid valve provides hands-free hygienic operation, and the pressure-regulating bubbler with a flexible antimicrobial rubber mouth guard requires no adjusting. Sensor activated bottle filler allows for hands free operation, and intuitive LED electronic display keeps the user informed when the water is being filtered and how many plastic bottles have been saved. Fresh, always filtered water with the Electronic Lifecycle Control feature shuts water flow off when filter reaches its gallons capacity. Flow will begin again when filter is replaced.
- Touchless operation for safety and peace of mind
- Flexible bubbler mouth guard to protect against injury
- Self-regulating bubbler flow – no need to adjust to varying incoming water pressures
- Anti-rotational screwed-in-place bubbler head
- Energy-Efficient Refrigeration Evaporator: Enhanced tankless evaporator coil using thermal mass cooling technology, with 100 percent water content flushed with every use
- Hands-free bottle filler sensor operation
- Vandal-resistant sensor resists scratching and water droplet fowling
- Auto purge feature automatically cycles once every 24 hours to assure a fresh water supply as well as trap integrity
- LED illuminated bottle fill area
- Quick 1.1 GPM fill rate (depending on incoming pressure) for bottle filler
- Smart energy savings feature powers down refrigeration system after 2 hours of non-use and the lights are shut off, and will automatically start again when used
- Programmable to be shut-down during planned facility closures, weekends, etc.
- High traffic area ready with a 3000-gallon (11,356 L) capacity filter
- Durable, easy to clean 304 stainless steel skin
- Retrofit installation compatibility over many existing water coolers
- 100% lead free waterways
- Unique basin design reduces water splashing and simplifies cleaning
- Galvanized steel frame
- Rated for indoor use
- Designed and assembled in the USA
- Filter Information
CSA certified to comply with NSF/ANSI 42, NSF/ANSI 53, NSF/ANSI/CAN 61: Q ≤ 1, NSF/ANSI/CAN 372, ASME A112.18.1/CSA B125.1, UL 399 and CSA C22.2 No. 120. ADA compliant to ICC A117.1, CSA B651, DOJ s 2010 ADA Standards for Accessible Design when properly installed. ASHRAE 18 compliant chilling capacity of 8.0 gallon per hour of 50 degree drinking water, based on 80 degree inlet water and 90 degree ambient temperature. FCC ID: 2AUAN-1200SFH and IC: 25359-1200SFH.
Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine), and failure to heed these conditions may void warranty.
1211SH – Wall Mount Indoor ADA Motion Activated Water Cooler and Bottle FillerThe Haws 1211SH wall-mount ADA touchless water cooler with bottle filler is the newest addition to the most comprehensive hydration offering in the industry. The modern, innovative design is tailored to meld with office spaces, universities and airports, or serve the functional needs of spaces like a school gymnasium. The sensor operated solenoid valve provides hands-free hygienic operation, and the pressure-regulating bubbler with a flexible antimicrobial rubber mouth guard requires no adjusting. Sensor activated bottle filler allows for hands free operation, and intuitive LED electronic display keeps the user informed with how many plastic bottles have been saved.
- Touchless operation for safety and peace of mind
- Flexible bubbler mouth guard to protect against injury
- Self-regulating bubbler flow – no need to adjust to varying incoming water pressures
- Anti-rotational screwed-in-place bubbler head
- Energy-Efficient Refrigeration Evaporator: Enhanced tankless evaporator coil using thermal mass cooling technology, with 100 percent water content flushed with every use
- Hands-free sensor operated bottle filler
- Vandal-resistant sensor resists scratching and water droplet fowling
- Auto purge feature automatically cycles once every 24 hours to assure a fresh water supply as well as trap integrity
- LED illuminated bottle fill area
- Quick 1.1 GPM fill rate (depending on incoming pressure) for bottle filler
- Smart energy savings feature powers down refrigeration system after 2 hours of non-use and the lights are shut off, and will automatically start again when used or light is restored to normal
- Programmable to be shut-down during planned facility closures, weekends, etc.
- Durable, easy to clean 304 stainless steel skin
- Retrofit installation compatibility over many existing water coolers
- 100% lead free waterways
- Unique basin design reduces water splashing and simplifies cleaning
- Galvanized steel frame
- Rated for indoor use
- Designed and assembled in the USA
CSA certified to comply with NSF/ANSI/CAN 61: Q ≤ 1, NSF/ANSI/CAN 372, ASME A112.18.1/CSA B125.1, UL 399 and CSA C22.2 No. 120. ADA compliant to ICC A117.1, CSA B651, DOJ’s 2010 ADA Standards for Accessible Design when properly installed. ASHRAE 18 compliant chilling capacity of 8.0 gallon per hour of 50 degree drinking water, based on 80 degree inlet water and 90 degree ambient temperature. FCC and CAN ICES – 3(A)/NMB-3(A).
Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine), and failure to heed these conditions may void warranty.
2000S – Recessed Wall-Mount ADA Touchless Bottle Filling StationThe model 2000S bottle filling station is a touch-free, hygienic, water dispenser that allows users to enjoy the benefits of fresh, filtered water with none of the drawbacks of bottled water. The system is tested and certified by CSA against NSF/ANSI Standard 42 for the reduction of chlorine (taste and odor) and against NSF/ANSI Standard 53 for the reduction of lead and cysts.
Recessed, in-wall-mounted design allows the bottle filling station to be placed securely in multiple locations without taking up excess space. The unit conveniently mounts between standard 16″ (406 mm) studs and is practical for permanent, high-traffic applications such as schools, office buildings, fitness centers, and manufacturing facilities.
Features and Benefits
- Tested and certified by CSA against NSF/ANSI Standard 42 for the reduction of chlorine (taste and odor) and against NSF/ANSI Standard 53 for the reduction of lead and cysts, NSF/ANSI Standard 61, Section 9, NSF/ANSI 372, CSA Standard B483.1 and California Health and Safety Code 116875 (AB 1953)
- Haws logo panel can be replaced with an optional custom printed logo panel
- Manufactured to comply with the American with Disabilities Act when installed per requirements of the Accessibility Guidelines, Section 41.5 for Drinking Fountains & Water Coolers
- ABS front panel is equipped with a hidden lock for easy access
- Sensor features a 30-second timeout function which prevents unwanted use
- Auto purge feature automatically cycles once every 24 hours to assure a fresh water supply as well as trap integrity
- State-of-the-art integral water filtration system assures fresh, filtered water
- 2,500 gallon (9464 L) capacity, Electronic Lifecycle Control filter cartridge, with filter replacement indicator light to notify when replacement is necessary, model 6423
- 16 gauge, Type 304 Stainless Steel back panel
- Laminar flow prevents splashing, keeping the drinking area contained and clean
- #4 satin finish back panel resists stains and corrosion
- Intended for indoor use only
*Certified to reduce lead and cysts. Substances reduced may not be in all users’ water.
2000SMS – Surface Wall-Mount Touchless Bottle Filling StationThe model 2000SMS bottle filling station is a touch-free, hygienic, water dispenser that allows users to enjoy the benefits of fresh, filtered water with none of the drawbacks of bottled water. The system is tested and certified by CSA against NSF/ANSI Standard 42 for the reduction of chlorine (taste and odor) and against NSF/ANSI Standard 53 for the reduction of lead and cysts. The surface mount bottle filling station is perfect for mounting on block or solid walls which cannot be cut into and where a recessed mount station (model 2000S) is not an option. The surface mount unit does not require a drain trap and has an integrated drain pan allowing the unit to be mounted in any location where there is reasonable access to a water line and standard 110V electrical outlet.
Features and Benefits
- Tested and certified by CSA against NSF/ANSI Standard 42 for the reduction of chlorine (taste and odor) and against NSF/ANSI Standard 53 for the reduction of lead and cysts, NSF/ANSI Standard 61, Section 9, NSF/ANSI 372, CSA Standard B483.1 and California Health and Safety Code (AB 1953)
- Haws logo panel can be replaced with an optional custom printed logo panel
- ABS front panel is equipped with a hidden lock for easy access
- Sensor features a 30-second timeout function which prevents unwanted use
- Optional auto purge feature automatically cycles once every 24 hours to assure a fresh water supply as well as trap integrity
- State-of-the-art integral water filtration system assures fresh, filtered water
- 2,500-gallon (9464 L) capacity Electronic Lifecycle Control filter cartridge, with filter replacement indicator light to notify when replacement is necessary, model 6423
- 16-gauge, Type 304 Stainless Steel back panel
- Laminar flow prevents splashing, keeping the drinking area contained and clean
- #4 satin finish back panel resists stains and corrosion
- Intended for indoor use only
*Certified to reduce lead and cysts. Substances reduced may not be in all users water.