Model HS11 in-wall mounting frame provides the maximum support and facilitates the installation of single bubbler RIVIVE series fountains and bottle fillers. Mounted during “rough-in” phase of construction, this mounting frame allows the single bubbler fountains to be easily and quickly installed.

• One-piece 12 gauge heavy duty mounting plate is welded to the 18 gauge wall frame
• Heavy gauge galvanized steel construction provides a solid support system for these single bubbler fountains that is not only sturdy but provides corrosion resistance as well.
• Wall opening size required is 18-5/8″ wide, 47-7/8″ high, and 6″ deep (47.3 x 121.6 x 12.7 cm)
• Power cord included

The Haws 8606SS walk-through booth enclosed combination shower and eye/face wash features the medically acclaimed AXION MSR stainless steel  eye/face wash head assembly. This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eye washes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain. AXION MSR also offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim of normal showerheads, making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets.

• Type 304 Stainless Steel dual-entry walk-through booth and piping construction with a satin finish
• Integral center location drain strainer
• Install flexibility with top or bottom inlet supply
• Large universal labeling and signage for easy locating
• Eyewash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
• A great addition to unsafe environments where the eyes, face, and body may be exposed to corrosive materials
• Requires minimal maintenance and is equipped with test card to record weekly testing
• Reducing installation time, the entire unit is pre-built and fully pressure tested

Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment.

The Haws 8605SS, an enclosed emergency shower and eye wash featuring the medically acclaimed AXION MSR stainless steel eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eye washes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain. AXION MSR also offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim of normal showerheads, making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets.

• Type 304 Stainless Steel booth and piping construction with a satin finish
• Integral center location drain strainer
• Install flexibility with top or bottom inlet supply
• Large universal labeling and signage for easy locating
• Eyewash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
• A great addition to unsafe environments where the eyes, face, and body may be exposed to corrosive materials
• Requires minimal maintenance and is equipped with test card to record weekly testing
• Reducing installation time, the enclosed emergency shower and eye wash is pre-built and fully pressure tested

Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment.

Learn More

The Haws 3612FBFA heavy-duty outdoor filtered pedestal bottle filler and drinking fountain can be configured in multiple variations before or after installation. This model is standard with two drinking fountains and one bottle filler, and the option of adding/changing a drinking fountain, bottle filler, dog bowl and/or hose bib at any time. It incorporates the ‘only’ all stainless-steel valve body that is machined out of solid bar stock, is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer, and has front access to the water stream height adjustment for easy maintenance without having to remove the valve. Equipped with vandal resistant components for long lasting durability.

• Only stainless steel valve body that is machined out of solid bar stock
• Interchangeable fountain and bottle filler arms help this unit to meet the changing needs of its environment
• 3000 gallon carbon block filter with mounting bracket reduces chlorine (taste and odor) and lead, and removes 99.99% of cysts
• ADA compliant standing adult height, and adult wheel chair bottle filler and fountain arm positions
• Heavy-duty fabricated stainless steel with matte silver powder-coated finish
• Large-opening bottle filler with quick-fill 1 gpm flow rate
• Custom color options available
• Easy maintenance with front access to valve adjustment and cartridge replacement
• Bowl and bubbler head can be rotated for location needs
• 100% lead-free waterways

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.

The Haws 3612BFA heavy-duty outdoor pedestal bottle filler and drinking fountain can be configured in multiple variations before or after installation. This model is standard with two drinking fountains and one bottle filler, and the option of adding/changing a drinking fountain, bottle filler, dog bowl and/or hose bib at any time. It incorporates the ‘only’ all stainless-steel valve body that is machined out of solid bar stock, is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer, and has front access to the water stream height adjustment for easy maintenance without having to remove the valve. Equipped with vandal resistant components for long lasting durability.

• Only stainless steel valve body that is machined out of solid bar stock
• Interchangeable fountain and bottle filler arms help this unit to meet the changing needs of its environment
• Bottle filler mounted at adult wheelchair height
• ADA compliant standing adult height, and adult wheel chair bottle filler and fountain arm positions
• Heavy-duty fabricated stainless steel with matte silver powder-coated finish
• Large-opening bottle filler with quick-fill 1 gpm flow rate
• Custom color options available
• Easy maintenance with front access to valve adjustment and cartridge replacement
• Bowl and bubbler head can be rotated for location needs
• 100% lead-free waterways

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.

The Haws 3603FR heavy-duty outdoor freeze-resistant ADA vandal-resistant pedestal drinking fountain can be configured in multiple variations before or after installation. This product is standard with three drinking fountain stations, with the option of adding/changing a drinking fountain, bottle filler, dog bowl and/or hose bib at any time. Water delivery is provided by a fully engineered pneumatic valve assembly that is one of the best in freeze-resistant technologies, and provides year-round operation. Equipped with vandal resistant components for long lasting durability.

• ADA compliant standing adult height, wheel chair, and child wheel chair arm positions to accommodate all users
• Vandal resistant components include the bubblers, buttons, drains and access plates
• Heavy-duty fabricated stainless steel with matte silver powder-coated finish
• Bowl and bubbler head can be rotated for location needs
• Custom color options available
• 100% lead-free waterways
• Consult with the local authority having jurisdiction before installation in order to determine if any additional regulations or requirements may apply

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.

The Haws 3603F heavy-duty outdoor ADA pedestal filtered vandal-resistant drinking fountain can be configured in multiple variations before or after installation. This product is standard with three drinking fountain stations, with the option of adding/changing a drinking fountain, bottle filler, dog bowl and/or hose bib at any time. It incorporates the ‘only’ all stainless-steel valve body that is machined out of solid bar stock, is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer, and has front access to the water stream height adjustment for easy maintenance without having to remove the valve. Equipped with vandal resistant components for long lasting durability.

• Only stainless steel valve body that is machined out of solid bar stock
• 3000 gallon carbon block filter with mounting bracket reduces chlorine (taste and odor) and lead, and removes 99.99% of cysts
• Vandal resistant components include the bubblers, buttons, drains and access plates
• ADA compliant standing adult height, wheel chair, and child wheel chair arm positions available to accommodate all users
• Heavy-duty fabricated stainless steel with matte silver powder-coated finish
• Custom color options available
• Bowl and bubbler head can be rotated for location needs
• Easy maintenance with front access to valve adjustment and cartridge replacement
• 100% lead-free waterways

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.

The Haws 3612F filtered outdoor bottle filler vandal-resistant stainless-steel pedestal bottle filler and drinking fountain can be configured in multiple variations before or after installation. This model is standard with two drinking fountains and one bottle filler, and the option of adding/changing a drinking fountain, bottle filler, dog bowl and/or hose bib at any time. It incorporates the ‘only’ all stainless-steel valve body that is machined out of solid bar stock, is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer, and has front access to the water stream height adjustment for easy maintenance without having to remove the valve. Equipped with vandal resistant components for long lasting durability.

• Only stainless steel valve body that is machined out of solid bar stock
• 3000 gallon carbon block filter with mounting bracket reduces chlorine (taste and odor) and lead, and removes 99.99% of cysts
• Vandal resistant components include the bubblers, bottle filler nozzle, buttons, drains and access plates
• Interchangeable fountain and bottle filler arms help this unit to meet the changing needs of its environment
• ADA compliant standing adult height, wheel chair, and child wheel chair arm positions to accommodate all users
• Heavy-duty fabricated stainless steel with matte silver powder-coated finish
• Large-opening bottle filler with quick-fill 1 gpm flow rate
• Custom color options available
• Easy maintenance with front access to valve adjustment and cartridge replacement
• Bowl and bubbler head can be rotated for location needs
• Filtered Outdoor Bottle Filler with 100% lead-free waterways

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.

The Haws 3611F ADA heavy-duty vandal-resistant outdoor filtered pedestal bottle filler and drinking fountain can be configured in multiple variations before or after installation. This model is standard with one drinking fountain and one bottle filler, and the option of adding/changing a drinking fountain, bottle filler, dog bowl and/or hose bib at any time. It incorporates the ‘only’ all stainless-steel valve body that is machined out of solid bar stock, is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer, and has front access to the water stream height adjustment for easy maintenance without having to remove the valve. Equipped with vandal resistant components for long lasting durability.

• Only stainless steel valve body that is machined out of solid bar stock
• 3000 gallon carbon block filter with mounting bracket reduces chlorine (taste and odor) and lead, and removes 99.99% of cysts
• Vandal resistant components include the bubbler, bottle filler nozzle, buttons, drain and access plates
• Interchangeable fountain and bottle filler arms help this unit to meet the changing needs of its environment
• ADA compliant standing adult height, wheel chair, and child wheel chair arm positions to accommodate all users
• Heavy-duty fabricated stainless steel with matte silver powder-coated finish
• Large-opening bottle filler with quick-fill 1 gpm flow rate
• Bowl and bubbler head can be rotated for location needs
• Custom color options available
• Easy maintenance with front access to valve adjustment and cartridge replacement
• 100% lead-free waterways

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.

The Haws 3610F ADA heavy-duty vandal-resistant outdoor filtered pedestal bottle filler can be configured in multiple variations before or after installation. This model is standard with a single bottle filler, and the option of adding/changing a drinking fountain, bottle filler, dog bowl and/or hose bib at any time. It incorporates the ‘only’ all stainless-steel valve body that is machined out of solid bar stock, is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer, and has front access to the water stream height adjustment for easy maintenance without having to remove the valve. Equipped with vandal resistant components for long lasting durability.

• Only stainless steel valve body that is machined out of solid bar stock
• 3000 gallon carbon block filter with mounting bracket reduces chlorine (taste and odor) and lead, and removes 99.99% of cysts
• Vandal resistant components include the bottle filler nozzle, button, and access plates
• Heavy-duty fabricated stainless steel with matte silver powder-coated finish
• Modular design allows options and accessories to be added or removed at any time
• Custom color options available
• Large-opening bottle filler with quick-fill 1 gpm flow rate
• Easy maintenance with front access to valve adjustment and cartridge replacement
• 100% lead-free waterways

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.

The Haws 3602F heavy-duty vandal-resistant outdoor ADA pedestal filtered drinking fountain can be configured in multiple variations before or after installation. This product is standard with two drinking fountain stations, with the option of adding/changing a drinking fountain, bottle filler, dog bowl and/or hose bib at any time. It incorporates the ‘only’ all stainless-steel valve body that is machined out of solid bar stock, is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer, and has front access to the water stream height adjustment for easy maintenance without having to remove the valve. Equipped with vandal resistant components for long lasting durability.

• Only stainless steel valve body that is machined out of solid bar stock
• 3000 gallon carbon block filter with mounting bracket reduces chlorine (taste and odor) and lead, and removes 99.99% of cysts
• Vandal resistant components include the bubblers, buttons, drains and bottom/access plates
• ADA compliant standing adult height, wheel chair, and child wheel chair arm positions available to accommodate all users
• Heavy-duty fabricated stainless steel with matte silver powder-coated finish
• Custom color options available
• Bowl and bubbler head can be rotated for location needs
• Easy maintenance with front access to valve adjustment and cartridge replacement
• 100% lead-free waterways

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) “NSF/ANSI/CAN 61: Q ≤ 1”.

The Haws 8740 emergency overhead tank shower is designed for indoor installation. The ANSI/ISEA Z358.1 compliant design as a self contained shower is to be used in 60° – 100° F (16° – 38° C) ambient temperatures. Modular six piece galvanized frame is easily assembled and disassembled for flexible placement options. Frame includes mounting feet with 4 bolt holes each for increased stability, and integral forklift slots for easy mobility. This unit includes a 330-gal IBC high-density polyethylene tank, supply inlet piping, auto-fill valve for refill, breather vent and 2″ NPT ball valve integral to tank for shower piping. Adheres to International Building Code 2012. Min Fill pressure: 20 PSIG with a minimum fill flow rate of 15 GPM. Max fill pressure: 60 PSIG. Large high-visibility green and white universal signage for quick identification on three sides. Supply inlet: 1-1/4″ NPTM PVC fitting. Standard plugged pipe fitting supplied for optional AXION eye/face wash assembly. Optional model 9084 cleansing stick can be used to provide continual protection against pathogenic bacteria in the water for up to 3 years. Model 8740 is certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment. Note: This unit must be plumbed through the supply inlet for ANSI Z358.1 compliance.

Trouble viewing this website?

Without an up-to-date browser, you may have trouble with some of our features.

Update Now

Edge

Firefox

Chrome