Home / Products / 1001HPSMS-1920HPSHO – ADA Vandal-Resistant Polished Fountain and Motion-Activated Bottle Filler

1001HPSMS-1920HPSHO

ADA Vandal-Resistant Polished Fountain and Motion-Activated Bottle Filler

Model 1001HPSMS-1920HPSHO, ADA vandal-resistant polished stainless fountain and touchless bottle filler with in-the-wall mounting system. FOR INDOOR USE ONLY The bottle filler requires a mounting plate; either the 6700 in-wall or the 6700R on-wall support plate. (See options below)
Contact Us for a Custom Solution

Required Parts Sold Separately

Fountain with Bottle Filler Spec Sheet

Operational / Maintenance Manual

MasterSpec® Files

Limited Warranty

Specifications

Model 1001HPSMS-1920HPSHO ADA vandal-resistant wall-mounted drinking fountain and motion activated bottle filler shall include an 18-gauge Type 304 polished Stainless Steel basin with integral swirl design, 14 gauge Type 304 polished Stainless Steel wall bracket and bottle filler bracket, in-wall mounting frame with lower access panel allowing for front access of P-trap and stop, 100% lead-free waterways, sensor operated solenoid valve with 30-second obstruction time-out on the bottle filler, and vandal-resistant push-button operated stainless-steel valve with front-accessible cartridge and flow adjustment on the fountain, polished chrome-plated brass vandal resistant bubbler head with integral laminar anti-squirt flow, 1gpm (3.78L) laminar flow bottle filler, chrome-plated brass vandal-resistant waste strainer, polished stainless steel back panels, and 1-1/4” O.D. (3.2 cm) waste pipe. The botte filler requires a mounting plate; either the Haws model 6700 in-wall or the 6700R on-wall support plate.

Pricing Information

$5668 USD
Contact Haws Specials

ADA Vandal-Resistant Polished Fountain and Motion-Activated Bottle Filler

The Haws 1001HPSMS-1920HPSHO vandal-resistant polished stainless-steel ADA drinking fountain and touchless bottle filler incorporates a sensor operated stainless steel solenoid valve controlled by a transformer for hands-free operation on the bottle filler, and offers the ‘only’ all stainless-steel valve body that is machined out of solid bar stock on the fountain. It is fully serviceable through the front of the push button assembly offering access to the water control cartridge and integral water supply strainer and has front access to the water stream height adjustment for easy maintenance without having to remove the valve.

Only stainless steel valve body that is machined out of solid bar stock
18 gauge Type 304 polished Stainless Steel bowl assembly mounted on a 14 gauge Type 304 polished Stainless Steel wall bracket
Vandal resistant components include the bubbler, bowl, button, drain and bottom plates
1 gpm (3.78 L) bottle filler laminar flow.
30-second obstruction time-out to reduce tampering of sensor
100% lead-free waterways
Front access plate allows for front access of P-trap and stop
Polished chrome-plated brass bubbler head with integral laminar anti-squirt flow eliminate water splash
Easy maintenance with front access to valve adjustment and cartridge replacement
Beautiful polished finish resists stains and corrosion
The bottle filler requires a mounting plate; either the 6700 in-wall or the 6700R on-wall support plate. (See options below)

Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and 116876 (AB 100) "NSF/ANSI/CAN 61: Q ≤ 1".

Prop 65 Warning. For California Residents Warning: This product contains a chemical known to the State of California to cause cancer and/or birth defects or other reproductive harm. Please click here for more information.