AXION<sup>®</sup> MSR Corrosion Resistant Shower and Eye/Face Wash

Double click to view larger

Zoom Out
Zoom In

AXION® MSR Corrosion Resistant Shower and Eye/Face Wash

Model: 8336

Model 8336, corrosion-resistant, PVC plastic combination shower and eye/face wash with AXION® MSR eye/face wash and showerhead, and green epoxy coating.

Struggling with ANSI compliance? We're here to help »

View Product Details Add to My Project

Description

AXION® MSR Corrosion Resistant Shower and Eye/Face Wash

The Haws 8336 combination shower and eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature's ocular cavity drain. AXION MSR also offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim of normal showerheads, making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets.

  • Emergency combination unit is equipped with Type 316 Stainless Steel ball valves and constructed of green epoxy finished, Schedule 80 PVC pipe and fittings which are resistant to corrosion
  • Eyewash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
  • A great addition to unsafe environments where the eyes and body may be exposed to corrosive materials
  • Requires minimal maintenance and is equipped with test card to record weekly testing
  • Reducing installation time, entire unit is pre-built and fully pressure tested
Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.
Prop 65 Warning. For California Residents Warning: This product contains a chemical known to the State of California to cause cancer and/or birth defects or other reproductive harm. Please click here for more information.

Features

  • Axion® Eye/Face Wash Head
  • Axion® Shower Head
  • Corrosion Resistant
  • Flow Regulation
  • Fully Assembled
  • In-Line Strainer
  • System Certified
  • Upgraded Ball Valves

Certifications

  • Buy American Act
  • CSA Certified

Interested in a custom safety solution?

Haws Integrated designs, manufactures, and installs water tempering systems for safety showers and eyewashes. Our team works directly with you to provide custom tempered water solutions for ANSI compliance and worker safety. Learn More

Replacement Parts
Ball Valve With Flag

Ball Valve With Flag

Model SP228 Type 316 stainless steel stay-open ball valve, equipped with a stainless steel ball and stem.

Add to My Project
Shower/Eyewash Sign

Shower/Eyewash Sign

Model SP178 vertical universal combination emergency shower and eyewash sign. Size: 8" x 10-3/4" (20.3 x 27.3 cm).

Add to My Project
Dust Cover

Dust Cover

Model 9091 yellow plastic dust cover for the AXION® MSR eye/face wash head.

Add to My Project
Eyewash Bowl

Eyewash Bowl

Model SP93 11" (27.9 cm) round green ABS plastic receptor. Resistant to damage from alkalies, salt solutions, oils and most acids.

Add to My Project
Shower Ball Valve

Shower Ball Valve

Model SP265 Type 316 stainless steel stay-open ball valve with stainless steel ball and stem.

Add to My Project
Pull Rod 28"

Pull Rod 28"

Model SP200, 28" (71.1 cm) long stainless steel pull rod.

Add to My Project
AXION<sup>®</sup> MSR Showerhead

AXION® MSR Showerhead

Model SP829, AXION® MSR ABS plastic drench showerhead with integral 20 gpm (75.7 L) flow control.

Add to My Project
AXION<sup>®</sup> MSR Eye/face Wash Head

AXION® MSR Eye/face Wash Head

Model SP65, AXION® MSR eye/face wash head with inverted directional flow, laminar flow, and integral flow control.

Add to My Project
Optional Accessories
Thermostatic Mixing Valve

Thermostatic Mixing Valve

Model 9201E AXION® Emergency Tempering Valve thermostatically mixes hot and cold water to provide a safe fluid supply for emergency showers and eyewash equipment, with a flow rate of 31 gpm (117.3 L).

Add to My Project
Emergency Alarm System

Emergency Alarm System

Model 9001, 1-1/4" 120 VAC emergency alarm and light system. Buzzer and flashing light are activated by an 1-1/4" double pole, double throw flow switch.

Add to My Project
AXION<sup>®</sup> MSR Showerhead

AXION® MSR Showerhead

Model SP829SS, AXION® MSR stainless steel drench showerhead with integral 20 gpm (75.7 L) flow control.

Add to My Project
 ANSI Shower and Eyewash Testing Kit

ANSI Shower and Eyewash Testing Kit

Model 9011 ANSI compliance test kit.

Add to My Project
Three Sided Safety Sign

Three Sided Safety Sign

Model 9020 green and yellow ABS plastic 3-sided high visibility sign.

Add to My Project
Thermostatic Mixing Valve

Thermostatic Mixing Valve

Model TWBS.SHE; Lead-free AXION® Emergency Tempering Valve thermostatically mixes hot and cold water to provide a safe fluid supply for emergency shower and eyewash equipment, with a flow rate of 74 gpm (280 L).

Add to My Project
Thermostatic Mixing Valve

Thermostatic Mixing Valve

Model 9201H Lead-free AXION® Emergency Tempering Valve thermostatically mixes hot and cold water to provide a safe fluid supply for emergency showers and eyewash equipment, with a flow rate of 31 gpm (117.3 L).

Add to My Project
Large Shower/Eyewash Sign

Large Shower/Eyewash Sign

Model SP178LG large vertical universal combination emergency shower and eyewash sign. Size: 18" x 24" (45.7 x 61 cm).

Add to My Project
Test Tag

Test Tag

SP170 is a green waterproof test card with space for date and initials of inspector. Used to record weekly testing of emergency equipment.

Add to My Project
Resources

8336 Sample Specifications

Model 8336 corrosion-resistant PVC plastic combination shower and eye/face wash shall include an AXION® MSR eye/face wash head shall feature inverted directional laminar flow which achieves Zero Vertical Velocity™ supplied by an integral 3.7 gpm flow control. Unit shall also include the AXION MSR hydrodynamic designed ABS plastic showerhead with 20 gpm flow control. The unit shall also include an ABS plastic 11" (27.9 cm) round bowl, stainless steel shower and eyewash ball valves equipped with stainless steel ball and stem, green epoxy finish, schedule 80 PVC 2 1/2" floor flange, schedule 80 PVC plastic vertical piping, universal sign, 1-1/4" IPS supply, and 1-1/2" slip waste.

Pricing Information

$2,146.00  Pricing Terms

We Can Help You Become ANSI Compliant

Does your organization comply with ANSI Z358.1 safety eyewash and shower standards? View our ANSI Z358.1 Resource Center to gain knowledge about the standard's requirements for safety equipment. View ANSI Z358.1 Resources Now »

Ask an Expert

Have product questions?

Have a question or concern about this product? If you don't find your answer, we're always here to help. Please use the form at the right and we'll get back to you within 48 business hours.