AXION<sup>®</sup> MSR Corrosion Resistant Pedestal Eye/Face Wash

Double click to view larger

Zoom Out
Zoom In

AXION® MSR Corrosion Resistant Pedestal Eye/Face Wash

Model: 7777

Model 7777, pedestal-mounted eye/face wash with AXION® MSR eye/face wash head, and all stainless steel components.

Struggling with ANSI compliance? We're here to help »

View Product Details Add to My Project

Description

AXION® MSR Corrosion Resistant Pedestal Eye/Face Wash

Model 7777 all stainless steel pedestal mounted eye and face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature's ocular cavity drain. Unit also is equipped with an in-line 50 x 50 mesh water strainer and yellow eyewash head dust cover so when debris is present, the irrigation process stays protected. Solid mounted pedestal design allows the 7777 to be placed securely in multiple locations.

  • A great addition to unsafe environments where the eyes and face may be exposed to corrosive materials
  • Eyewash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
  • Reducing installation time, eye/face wash and valve assembly is pre-built and fully water/pressure tested
  • Corrosion resistant construction from Type 304 Stainless Steel with a Type 316 Stainless Steel ball valve
  • ANSI Z358.1 tempering compliance options
  • Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment
Prop 65 Warning. For California Residents Warning: This product contains a chemical known to the State of California to cause cancer and/or birth defects or other reproductive harm. Please click here for more information.

Features

  • Axion® Eye/Face Wash Head
  • Corrosion Resistant
  • Flow Regulation
  • In-Line Strainer
  • Key Components Assembled
  • System Certified
  • Upgraded Ball Valves

Certifications

  • Buy American Act
  • CSA Certified

Interested in a custom safety solution?

Haws Integrated designs, manufactures, and installs water tempering systems for safety showers and eyewashes. Our team works directly with you to provide custom tempered water solutions for ANSI compliance and worker safety. Learn More

Replacement Parts
Waste Strainer

Waste Strainer

Model 6450, polished stainless steel waste strainer for drinking fountain receptors.

Add to My Project
Dust Cover

Dust Cover

Model 9091 yellow plastic dust cover for the AXION® MSR eye/face wash head.

Add to My Project
In-Line Strainer

In-Line Strainer

Model SP509SS is a Type 304 stainless steel in-line 50 x 50 mesh water strainer.

Add to My Project
Ball Valve With Flag

Ball Valve With Flag

Model SP232 is a Type 316 stainless steel stay-open ball valve, equipped with a stainless steel ball and stem.

Add to My Project
AXION<sup>®</sup> MSR Eye/face Wash Head

AXION® MSR Eye/face Wash Head

Model SP65SS, AXION® MSR stainless steel eye/face wash head with inverted directional flow, laminar flow, and integral flow control.

Add to My Project
Floor Flange

Floor Flange

Part 0005717000, 9" (22.9 cm) diameter cast finish Type 304 Stainless Steel floor flange with three mounting holes. 1-1/4" MIPS.

Add to My Project
Eyewash Bowl

Eyewash Bowl

Model SP90 11" (27.9 cm) round stainless steel with No. 2L bright finish on exterior.

Add to My Project
Universal Eyewash Sign

Universal Eyewash Sign

Model SP175 vertical universal emergency eyewash sign. Size: 8" x 10-3/4" (20.3 x 27.3 cm).

Add to My Project
Optional Accessories
Thermostatic Mixing Valve

Thermostatic Mixing Valve

Model 9201EW AXION® Emergency Tempering Valve thermostatically mixes hot and cold water to provide a safe fluid supply for a single emergency eye/face wash, with a flow rate of 10 gpm (38.8 L).

Add to My Project
Dust Cover

Dust Cover

Model 9102 is a stainless steel cover that protects the eyewash heads as well as the bowl. (Picture shows cover mounted to an eyewash.)

Add to My Project
Foot Treadle

Foot Treadle

Model SP220SS foot control assembly, including chain, clamp, nut, ring, screw, spring and stainless steel treadle.

Add to My Project
Thermostatic Mixing Valve

Thermostatic Mixing Valve

Model 9201EFE AXION® Emergency Tempering Valve thermostatically mixes hot and cold water to provide a safe fluid supply for a single emergency eye/face wash, with a flow rate of 12 gpm (38.8 L).

Add to My Project
Thermostatic Mixing Valve

Thermostatic Mixing Valve

Model TWBS.EWE Lead-free AXION® Emergency Tempering Valve thermostatically mixes hot and cold water to provide a safe fluid supply for emergency eyewash equipment, with a flow rate of 12 gpm (45.4 L).

Add to My Project
Test Tag

Test Tag

SP170 is a green waterproof test card with space for date and initials of inspector. Used to record weekly testing of emergency equipment.

Add to My Project
Resources

7777 Sample Specifications

Model 7777 stainless steel pedestal-mounted eye/face wash shall include a stainless steel 11" (27.9 cm) round bowl, an AXION® MSR eye/face wash head with inverted directional laminar flow which achieves Zero Vertical Velocity™ supplied by an integral 3.7 gpm flow control, Type 316 stainless steel ball valve equipped with stainless steel ball and stem, and Type 304 stainless steel in-line 50 x 50 mesh water strainer. Unit shall also include Type 304 pipe, fittings, and floor flange, along with a yellow plastic dust cover, universal sign, 1/2" NPT inlet, and 1-1/4" NPT waste.

Pricing Information

$1,843.00  Pricing Terms

We Can Help You Become ANSI Compliant

Does your organization comply with ANSI Z358.1 safety eyewash and shower standards? View our ANSI Z358.1 Resource Center to gain knowledge about the standard's requirements for safety equipment. View ANSI Z358.1 Resources Now »

Ask an Expert

Have product questions?

Have a question or concern about this product? If you don't find your answer, we're always here to help. Please use the form at the right and we'll get back to you within 48 business hours.