Remote Drinking Fountain Water chiller

Double click to view larger

Zoom Out
Zoom In

Remote Drinking Fountain Water chiller

Model: HCR8

Model HCR8, 8 gph (30.3 L) remote water chiller provides instantaneous cooling to meet a continuous demand for chilled water.

View Product Details Add to My Project

Description

Remote Drinking Fountain Water chiller

The Haws model HCR8 remote chiller provides 8 gallons (30.3 L) per hour of 50° F (10° C) +/- 5° cold water to a wide variety of fountains. This model is rated at 115V, 60Hz, single phase, 5 amp service. It is constructed of heavy gauge galvanized steel and its compact style can be concealed under a counter, between or within walls (check local codes) or high on a wall or column. Other uses could include pre-cooling of beverage dispensers, machine coolant cooling, and many other applications.

  • Cooling capacity of 8 gph (30.3 L) , 115V - 60Hz system with full load amps of 5, with a minimum 4" (10.2 cm) clearance for sides and back of unit.
  • Haws electric water chiller is certified by WQA to NSF/ANSI Standard 61, Section 9, comply with ARI Standard 1010, and be listed by Underwriter Laboratories to U.S. and Canadian standards.
Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.
Prop 65 Warning. For California Residents Warning: This product contains a chemical known to the State of California to cause cancer and/or birth defects or other reproductive harm. Please click here for more information.

Certifications

  • Buy American Act
Optional Accessories
Shelf

Shelf

Model H7149MS, mounting shelf for remote chillers.

Add to My Project
Resources

HCR8 Sample Specifications

Model HCR8 remote chiller is a hermetically sealed R-134a refrigeration system and is capable of supplying water to a maximum of 2 bubbler stations and is designed to provide 8 gph (30.3 L) of water at 50° F (10° C) +/- 5°. The unit is rated at 115V, 60Hz, and 5 amps. NOTE: For remote installations; locate unit no more than 8ft (2.4m) away from fixtures which it supplies. Chilled water tubing/piping run must be covered with appropriate insulation in order to conserve temperature and avoid condensation.

Pricing Information

$932.00  Pricing Terms

Ask an Expert

Have product questions?

Have a question or concern about this product? If you don't find your answer, we're always here to help. Please use the form at the right and we'll get back to you within 48 business hours.