6477 – Retrofit Filter Kit for 3600 Series Outdoor Fountains

The Haws 6477 retrofit filter kit for the 3600 series outdoor pedestal fountains includes the 6428 filter, filter bracket and supply line parts. The 6428 filter is a carbon block filter cartridge with a service life of 1 year/3000-gallons (11356 L). Installation is accomplished without special tools or modification to the main pedestal.

Tested and certified by CSA against NSF/ANSI Standard 42 for the reduction of chlorine (taste and odor) and against NSF/ANSI Standard 53 for the reduction of lead and cysts.

SK14 – Skirt for Haws 1210 models

The Haws model SK14 stainless steel skirt is the outer apron for the 1210 series Haws chilled bottle fillers.

VRKHO8 – Hard-Wire Transformer

Model VRKHO8 is the hard-wired transformer for the Haws HO (hands-off) motion-activated fountains produced after October 1st, 2021.

VRKHO7 – Plug-in Transformer

Model VRKHO7 is the plug-in transformer for the Haws HO (hands-off) motion-activated fountains produced after October 1st, 2021.

VRKHO6 – Motion-Activated Electronic Sensor

Model VRKHO6 is the electronic sensor for the Haws HO (hands-off) motion-activated fountains produced after October 1st, 2021.

VRKHO5 – Sensor Valve

Model VRKHO5, sensor valve for the Haws HO (hands-off) motion-activated fountains produced after October 1st, 2021. Sensor features a 30-second obstruction time-out to reduce tampering.

Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and NSF/ANSI/CAN 61: Q ≤ 0.5.

3RKHO.P – Triple or Dual Fountain w/Bottle Filler Fountain HO Sensor and Solenoid Valve Retrofit Kit

The Haws 3RKHO.P sensor retrofit kit includes electric solenoid valves controlled by sensors that will convert most Haws standard push button operated wall-mounted dual station drinking fountains and the 1920 bottle filler combination to be a touchless system which allows these products to be operated hands-free. Each kit contains touchless, motion activated sensors that activate stainless steel solenoid valves to start the flow of water, valve regulators to control the amount of water delivered to the fountain or bottle filler, and a plug-in transformer (mounted inside a wall, away from water).  FOR INDOOR USE ONLY

Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and NSF/ANSI/CAN 61: Q ≤ 0.5.

BP15W – White Back Panel

Model BP15W is a versatile and decorative back panel for model 1920W that increases location visibility of the bottle filler, and also helps protect wall from inadvertent splash. This back panel is 15″ x 17″ (38 x 43 cm) stainless steel with a white powder-coat finish.

BP8W – White Back Panel

Model BP8W is a versatile and decorative back panel for Model 1311 that increases location visibility of the fountain and also helps protect wall from inadvertent splash. It is a 15″ x 9″ (38 x 23 cm) stainless steel panel with white powder coating.

3RKHO.H – Triple Fountain or Dual Fountain w/Bottle Filler Motion Activated Sensor and Solenoid Valve Retrofit Kit

The Haws 3RKHO.H sensor retrofit kit includes electric solenoid valves controlled by sensors that will convert most Haws standard push button operated wall-mounted dual station drinking fountains and the 1920 bottle filler combination to be a touchless system which allows these products to be operated hands-free. Each kit contains touchless, motion activated sensors that activate stainless steel solenoid valves to start the flow of water, valve regulators to control the amount of water delivered to the fountain or bottle filler, and a hard-wired in transformer (mounted inside a wall, away from water).  FOR INDOOR USE ONLY

Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and NSF/ANSI/CAN 61: Q ≤ 0.5.

2RKHO.P – Dual Fountain or Single Fountain w/Bottle Filler Motion Activated Sensor and Solenoid Valve Retrofit Kit

The Haws 2RKHO.P sensor retrofit kit includes electric solenoid valves controlled by sensors that will convert most Haws standard push button operated wall-mounted dual station drinking fountains, or a single fountain-1920 bottle filler combination to be a touchless system which allows these products to be operated hands-free. Each kit contains touchless, motion activated sensors that activate stainless steel solenoid valves to start the flow of water, valve regulators to control the amount of water delivered to the fountain or bottle filler, and a plug-in transformer (mounted inside a wall, away from water).  FOR INDOOR USE ONLY

Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and NSF/ANSI/CAN 61: Q ≤ 0.5.

2RKHO.H – Dual Fountain or Single Fountain w/Bottle Filler Motion Activated Sensor and Solenoid Valve Retrofit Kit

The Haws 2RKHO.H sensor retrofit kit includes electric solenoid valves controlled by sensors that will convert most Haws standard push button operated wall-mounted dual station drinking fountains, or a single fountain-1920 bottle filler combination to be a touchless system which allows these products to be operated hands-free. Each kit contains touchless, motion activated sensors that activate stainless steel solenoid valves to start the flow of water, valve regulators to control the amount of water delivered to the fountain or bottle filler, and a hard-wired in transformer (mounted inside a wall, away from water).

Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and NSF/ANSI/CAN 61: Q ≤ 0.5.