The Haws Advantage

CRP Protective Coating

Patented Exclusives

Advanced Features

ADA Advantage

Haws uses Sherwin Williams Tile-Clad II Epoxy when an emergency model is CRP (corrosion resistant paint) coated. This is a two part liquid epoxy which is sprayed on the model and air dried.

The valves, bowl, eyewash and shower head assemblies, pull rods and flow controls are constructed of corrosion-resistant ABS plastic, stainless steel or chrome-plated brass, and are not CRP coated.

Sherwin Williams
Tile-Clad II Epoxy B62
Series Gloss Hardener B60V70

Recommended Uses:

For use over prepared substrates such as steel, galvanizing, and concrete in industrial environments.

• Laboratories
• Masonry surfaces
• Offshore structures
• Storage tanks
• Chemical processing equipment
• Institutional & commercial wall coating
• Structural & support steel
• Institutional kitchens
• Lavatories
• Power plants
• Schools
• Marine applications
• Nuclear power facilities

Product Description:

TILE-CLAD HIGH SOLIDS is a VOC compliant, two-package, epoxy-polyamide coating for use in industrial maintenance environments and high performance architectural applications.

• Chemical resistant
• Dry film resists bacterial attack
• Abrasion resistant
• Suitable for use in USDA inspected facilities
• Low VOC

Physical Properties:

Quality	Endurance	Quality	Endurance	Resistance Guide
Abrasion Resistance (ASTM D4060, CS-17 wheel, 1,000 cycles, 1 kg. Taber Abraser)	132 mg	Moisture Condensation Resistance (ASTM D2247, 100°F, 1500 hours)	No Failure	(per ASTM D3912) Alcohols, formaldehyde, glycol ethers, selected chlorinated solvents: MODERATE Aliphatic hydrocarbon solvents, gasoline, derosene, fuel oil: SEVERE Alkalies: SEVERE Aromatic hydrocarbon solvents: MODERATE Animal and vegetable fats and oils, cutting oils, lubricating oils: SEVERE Fresh and salt water: SEVERE Weak solutions of mineral and organic acids: MODERATE Characteristics Color/Finish: OSHA Green Gloss: 90 +/- 10 units @ 60°F
Direct Impact Resistance (ASTM G14)	84 in. lbs.	Pencil Hardness (ASTM D3363)	B
Dry Heat Resistance (ASTM D2485; OSHA Red; 150°F) (Discolors)	250°F	Salt Fog Resistance (ASTM D2986, 9,700 cycles)	Good
Elcometer Adhesion (ASTM D4541)	750 psi	Scrub Resistance (ASTM D2986, 9,700 cycles)	No Gloss Charge
Exterior (with nonprogressive chalk face developing in 3 months)	Excellent	Thermal Shock (ASTM B1211, 5 cycles)	Excellent
Flexibility (ASTM D1737, 180° Bend, 1/4" mandrel)	Passes	Washability and Stain Resistance For complete removal of lipstick, tea, Coke, butter, ketchup, fruit juice	Maximum 25 cycles

Drinking Fountains & Electric Water Coolers • Emergency Equipment • Purchase & Locate Rep • About Haws • Home

Privacy Policy • Send Haws products technical questions to techsupport@hawsco.com

Copyright 2008 by Haws Corporation
Web Design by Global Studio, an advertising agency.
Send website technical questions to info@globalstudio.com