AXION<sup>®</sup> MSR Wall Mount Eye/Face Wash

Double click to view larger

Zoom Out
Zoom In

AXION® MSR Wall Mount Eye/Face Wash

Model: 7360BT-7460BT

Model 7360BT-7460BT wall mounted, stainless bowl eye/face wash with AXION® MSR eye/face wash head.

Required Parts Sold Separately?

SP95

Struggling with ANSI compliance? We're here to help »

View Product Details Add to My Project

Description

AXION® MSR Wall Mount Eye/Face Wash

Model 7360BT-7460BT wall mounted eye and face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature's ocular cavity drain.

  • Eyewash streams provide zero vertical velocity stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
  • Features a round 11" (27.9 cm) stainless steel receptor, aluminum wall bracket and tailpiece and trap
  • Includes a mesh in-line strainer to collect line debris, and ball valve with stainless steel ball and stem for durability
  • Supply: 1/2" IPS. Waste: 1- 1/2" IPS
Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.

Due to technology advancements these (two models) are now the same.

Features

  • Axion® Eye/Face Wash Head
  • Flow Regulation
  • In-Line Strainer
  • Key Components Assembled
  • System Certified
  • Upgraded Ball Valves
  • Buy America Act
  • CSA Certified

Interested in a custom safety solution?

Haws Integrated designs, manufactures, and installs water tempering systems for safety showers and eyewashes. Our team works directly with you to provide custom tempered water solutions for ANSI compliance and worker safety. Learn More

Replacement Parts
Dust Cover

Dust Cover

Model 9091 yellow plastic dust cover for the AXION MSR™ eye/face wash head.

Add to My Project
Eyewash Bowl

Eyewash Bowl

Model SP90 11" (27.9 cm) round stainless steel with No. 2L bright finish on exterior.

Add to My Project
AXION<sup>®</sup> MSR Eye/Face Wash Head

AXION<sup>®</sup> MSR Eye/Face Wash Head

Model SP65, AXION® MSR eye/face wash head with inverted directional flow, laminar flow, and integral flow control.

Add to My Project
Ball Valve With Flag

Ball Valve With Flag

Model SP229 chrome-plated brass stay-open ball valve, equipped with a stainless steel ball and stem.

Add to My Project
Waste Trap

Waste Trap

Model SP95 chrome-plated brass trap with tailpiece. 1-1/2" IPS.

Add to My Project
Mounting Bracket

Mounting Bracket

Model SP80 cast-aluminum wall bracket with chromate protective finish.

Add to My Project
In-Line Strainer

In-Line Strainer

Model SP509 chrome-plated brass in-line 50 x 50 mesh water strainer.

Add to My Project
Eyewash Sign

Eyewash Sign

Model SP175 vertical universal emergency eyewash sign. Size: 8" x 10-3/4" (20.3 x 27.3 cm).

Add to My Project
Optional Accessories
Foot Treadle

Foot Treadle

Model SP220W wall mounted foot control assembly, including powder-coated aluminum treadle and wall bracket for hands free activation of eyewash.

Add to My Project
Thermostatic Mixing Valve

Thermostatic Mixing Valve

Model TWBS.EWE Lead-free AXION® Emergency Tempering Valve thermostatically mixes hot and cold water to provide a safe fluid supply for emergency eyewash equipment, with a flow rate of 12 gpm (45.4 L).

Add to My Project
Instantaneous Water Heater

Instantaneous Water Heater

Model TWBS.EW.H, prepackaged instantaneous electrical water heater, 480 VAC/3 phase/20 KW, fully engineered and tested system with fail-safe features to produce up to 6 gpm (22.7 L) tempered water for eye washes.

Add to My Project
Thermostatic Mixing Valve

Thermostatic Mixing Valve

Model 9201EW AXION® Emergency Tempering Valve thermostatically mixes hot and cold water to provide a safe fluid supply for a single emergency eye/face wash, with a flow rate of 10 gpm (38.8 L).

Add to My Project
Thermostatic Mixing Valve

Thermostatic Mixing Valve

Model 9201EFE AXION® Emergency Tempering Valve thermostatically mixes hot and cold water to provide a safe fluid supply for a single emergency eye/face wash, with a flow rate of 12 gpm (38.8 L).

Add to My Project
Emergency Body Spray Kit

Emergency Body Spray Kit

Model 8901RFK, body spray unit with ABS plastic head, stay open squeeze lever valve, 8 foot (243.8 cm) hose, and installation kit.

Add to My Project
Dust Cover

Dust Cover

Model 9102 is a stainless steel cover that protects the eyewash heads as well as the bowl. Pushing the stainless steel flag will activate the unit while raising the dust cover. (Picture shows cover mounted to an eyewash.)

Add to My Project
Strainer Repair Kit

Strainer Repair Kit

Model VRKEWSTR is a repair kit for SP507 and SP509. Includes screen and gasket.

Add to My Project
Test Tag

Test Tag

SP170 is a green waterproof test card with space for date and initials of inspector. Used to record weekly testing of emergency equipment.

Add to My Project
Scald Protection Bleed Valve

Scald Protection Bleed Valve

Model SP157B, fully engineered scald protection valve.

Add to My Project
Emergency Alarm System

Emergency Alarm System

Model 9001.5, 1/2" 120 VAC emergency alarm and light system. Buzzer and flashing light are activated by a 1/2" IPS double pole, double throw flow switch.

Add to My Project
Resources

7360BT-7460BT Sample Specifications

Model 7360BT-7460BT wall mounted eye/face wash shall include a stainless steel 11" (27.9 cm) round bowl, an AXION® MSR eye/face wash head shall feature inverted directional laminar flow which achieves zero vertical velocity supplied by an integral flow control, chrome-plated brass stay-open ball valve equipped with stainless steel ball and stem, and chrome-plated brass in-line 50 x 50 mesh water strainer. Unit shall also include cast-aluminum chromate protected wall bracket, yellow plastic pop-off dust cover for eyewash head, tailpiece and trap, universal sign, 1/2" IPS inlet, and 1-1/2" IPS waste. REQUIRES MODEL SP95 PRICED SEPARATELY.

Pricing Information

$385.00  Pricing Terms

We Can Help You Become ANSI Compliant

Does your organization comply with ANSI Z358.1 safety eyewash and shower standards? View our ANSI Z358.1 Resource Center to gain knowledge about the standard's requirements for safety equipment. View ANSI Z358.1 Resources Now »

Ask an Expert

Have product questions?

Have a question or concern about this product? If you don't find your answer, we're always here to help. Please use the form at the right and we'll get back to you within 48 business hours.