U.S. List Price: $4853.00
Model TWBS.SH, prepackaged, fully engineered and tested system for mixing hot and cold water to provide tempered water up to 40 gpm for emergency showers and eyewashes (Pat.# 5,350,112).
Model TWBS.SH is a prepackaged, fully engineered and tested system for mixing hot and cold water to provide tempered water up to 40 gpm for emergency shower and eyewashes (Pat.# 5,350,112). It consists of a thermostatic mixing valve, a high temperature limit valve, a bypass valve, and an outlet temperature gauge.
The vast majority of Haws products qualify under the terms of the act. However, since different purchases often require subtly different responses, Haws recommends that the specific document requesting certification be sent to customer service for a specific answer.
Mixing Valve |
|
Bypass Valve |
|
Hot shut-off valve |
Enclosed Emergency Environments |
|
Tempered Water Blending System Cabinet |
There are no cleaning and maintenance instructions for this model. Please contact Haws' Technical Department at 800-766-5612 for instructions.
Model TWBS.SH is a prepackaged, fully engineered and tested system for mixing hot and cold water to provide tempered water up to 40 gpm for emergency shower and eyewashes. It consists of a thermostatic mixing valve, a high temperature limit valve, a bypass valve, and an outlet temperature gauge. Unit is constructed of bronze, brass, copper and stainless steel. Ideal for areas where supply water temperature fall below 60°F (15°C). Unit contains no electrical components; thus suitable for combustible atmospheres. Maximum inlet pressure: 125 psi. Maximum inlet temperature: 180°F (82°C). Recommended inlet temperature: 140°F (60°C). Pressure requirements: 60 psi to adequately supply water for safety shower. Inlet and outlet: 1-1/4" IPS. Dielectric inlet and outlet unions provided.