Model 8785

Model 8785

Pricing Terms

Model 8785 water resistant, polyurea membrane-encased, steel-reinforced wooden booth tempering system that comes equipped with internal hot water system, blending system and space heater. Designed to be installed in freezing environments. System is designed to supply tempered water to either shower or eyewash.

Model 8785 Product Details

Model 8785 is an enclosed and heated tempering station with integral hot water supply. It includes a hot water storage tank with heater, mixing valve, and space heater.

Specifications
Enclosure:
Booth: Booth is a water resistant, polyurea membrane-encased, steel-reinforced wooden structure. Protected with UV inhibitors, the exterior skin is bright yellow with Safety Green graphics. Large graphics identify the booth as a tempering station. The interior space is heated to protect the equipment from freezing.
Door: Door is hinged and bolted to the booth to prevent unwanted access.
Blending System: Model TWBS.SH.
Water Heater: 4 kW, 240 VAC copper immersion heater. Dual element thermostat with manual reset hi-limit protection.
Space Heater: Natural convection 2.5 kW.

Plumbing
Schedule 40 galvanized piping with brass and stainless steel valves.
Supply: 1-1/4" IPS.

Tempering System Options:
Tank Systems
Option No. 21: 119 gallon tank: Stores enough hot water to provide a single 20-gpm shower for 15 minutes. Recovery time up to 4 hours.
Option No. 22: 119 gallon ASME tank: Stores enough hot water to provide a single 20-gpm shower for 15 minutes. Recovery time up to 4 hours.

Electrical System Options
Standard system requires a 208-240/120 VAC, single phase, 2 wire and ground, 40 amp, electrical supply. Electrical systems can be provided to meet various environmental requirements. Select the electrical option that meets the environmental conditions where the Polar unit is to be installed.
Option 31: NEMA 4 water/dust tight.
Option 32: Class I, Division 2, Group B, C and D, T2D.

Specify tempering booth models as follows: a model number, tempering system option, electrical system option. Example: Model 8785.22.32 is a Model 8785 Polar Booth II equipped with 119 gallon ASME tank, Class 1, Division 2, Group B, C, D, T2D electrical system.

Buy America Act Information

The vast majority of Haws products qualify under the terms of the act. However, since different purchases often require subtly different responses, Haws recommends that the specific document requesting certification be sent to customer service for a specific answer.

Model 8785 Components

Model 8785 Options & Accessories

Engineered.Solutions

Enclosed Emergency Environments
There are a variety of possibilities for your application. Please write to engineeredsolutions@hawsco.com to discuss.

Model 8785 Downloads

Model 8785 Sample Specifications

Model 8785 is an enclosed and heated tempering station with integral hot water supply. It includes a hot water storage tank with heater, mixing valve, and space heater. The booth is a water resistant, polyurea membrane-encased, steel-reinforced wooden structure. Protected with UV inhibitors, the exterior skin is bright yellow with Safety Green graphics. Large graphics identify the booth as a tempering station. The interior space is heated to protect the equipment from freezing. The door is hinged and bolted to the booth to provent unwanted access.The blending System is Model TWBS.SH. 4 kW, 240 VAC copper immersion water heater. Dual element thermostat with manual reset hi-limit protection, and a natural convection 2.5 kW space heater. Schedule 40 galvanized piping with brass and stainless steel valves. Supply: 1-1/4" IPS. Choice of 119 gallon tank or 119 gallon ASME tank, both provide 20-gpm with a recovery time of 4 hours. Standard electrical system requires a 208-240/120 VAC, single phase, 2 wire and ground, 40 amp, electrical supply. Electrical systems can be provided to meet various environmental requirements, which include NEMA 4 water/dust tight, or Class I, Division 2, Group B, C and D, T2D.